Ausgabe 4/2002
Inhalt (35 Artikel)
Phase equilibria of the ternary Ni-Cr-Zr system and interfacial reactions in the Ni-Cr/Zr couples
Shyh-Jye Luo, Chao-Hong Wang, Sinn-Wen Chen
The production of ultrafine ferrite in low-carbon steel by strain-induced transformation
M. R. Hickson, P. J. Hurley, R. K. Gibbs, G. L. Kelly, P. D. Hodgson
Finite element modeling of the morphology of β to α phase transformation in Ti-6Al-4V alloy
I. Katzarov, S. Malinov, W. Sha
Crystallization kinetics of amorphous magnesium-rich magnesium-copper and magnesium-nickel alloys
A. T. W. Kempen, H. Nitsche, F. Sommer, E. J. Mittemeijer
In-situ measurement of continuous cooling β → α transformation behavior of CP-Ti
S. K. Kim, J. K. Park
Precipitation of austenite particles at grain boundaries during aging of Fe-Mn-Ni steel
Seung-Ho Mun, Masashi Watanabe, David B. Williams, Xingyi Li, Kyu Hwan Oh, Hu-Chul Lee
Microstructural evolution of a shaped-charge liner and target materials during ballistic tests
Seong Lee, Moon-Hee Hong, Joon-Woong Noh, Woon Hyoung Baek
Theory for growth of needle-shaped particles in multicomponent systems
P. E. J. Rivera-Díaz-Del-Castillo, H. K. D. H. Bhadeshia
Symmetry-breaking transitions in equilibrium shapes of coherent precipitates: Effect of elastic anisotropy and inhomogeneity
R. Sankarasubramanian, C. S. Jog, T. A. Abinandanan
Hot rolling texture development in CMnCrSi dual-phase steels
T. Waterschoot, L. Kestens, B. C. De Cooman
Analysis of steady-state thermal creep of Zr-2.5Nb pressure tube material
N. Christodoulou, C. K. Chow, P. A. Turner, C. N. Tomé, R. J. Klassen
Shrinkage and splitting of microcracks under pressure simulated by the finite-element method
Peizhen Huang, Zhonghua Li, Jun Sun
Toughness-strength relations in the overaged 7449 al-based alloy
N. Kamp, I. Sinclair, M. J. Starink
The effect of grain size on the ambient temperature creep deformation behavior of a beta Ti-14.8 V alloy
Anand Ramesh, Sreeramamurthy Ankem
A critical-strain criterion for hydrogen embrittlement of cold-drawn, ultrafine pearlitic steel
D. G. Enos, J. R. Scully
The effects of test temperature, temper, and alloyed copper on the hydrogen-controlled crack growth rate of an Al-Zn-Mg-(Cu) alloy
George A. Young Jr., John R. Scully
Effects of metal vapor on electron temperature in helium gas tungsten arcs
Hidenori Terasaki, Manabu Tanaka, Masao Ushio
Toward prediction of microstructural evolution during laser surface alloying
S. S. Babu, S. A. David, R. P. Martukanitz, K. D. Parks
Surface engineering of timet 550 with oxygen to form a rutile-based, wear-resistant coating
C. Boettcher, T. Bell, H. Dong
Control of surface carburization and improvement of dynamic fracture behavior in tungsten heavy alloys
Sug-Woo Jung, Suk-Joong L. Kang, Sunghak Lee, Eun-Pyokim, Joon-Woong Noh, Woon-Hyung Baek
Cellular array morphology during directional solidification
S. N. Tewari, Y-Husuan Weng, G. L. Ding, R. Trivedi
Formation of white layers in steels by machining and their characteristics
S. Akcan, WI. S. Shah, S. P. Moylan, S. Chandrasekar, P. N. Chhabra, H. T. Y. Yang
A study on inhomogeneous distribution of temper graphite particles in strip-cast Fe-C-Si alloys
J. M. Song, T. S. Lui, L. H. Chen
Formation of a TiB2-reinforced copper-based composite by mechanical alloying and hot pressing
S. J. Dong, Y. Zhou, B. H. Chang, Y. W. Shi
Microstructures and mechanical properties of (Ir,Rh)75Nb15Ni10 alloys
Y. F. Gu, Y. Yamabe-Mitarai, S. Nakazawa, Y. Ro, H. Harada
Infrared imaging during low-cycle fatigue of HR-120 alloy
H. Wang, L. Jiang, Y. H. He, L. J. Chen, P. K. Liaw, R. R. Seeley, D. L. Klarstrom
Effect of carbon addition on tribological properties of Fe-Al alloys
S. M. Zhu, X. S. Guan, K. Shibata, K. Iwasaki
The effects of test temperature, temper, and alloyed copper on the hydrogen-controlled crack growth rate of an Al-Zn-Mg-(Cu) alloy
George A. Young Jr., John R. Scully