Ausgabe 7/2002
Inhalt (36 Artikel)
High temperature SANS experiments on Nb(C,N) and MnS precipitates in HSLA steel
N. H. Van Dijk, W. G. Bouwman, S. E. Offerman, M. Th Rekveldt, J. Sietsma, S. Van der Zwaag, A. Bodin, R. K. Heenan
Inferring dynamic recrystallization in ferrite using the kinetics of static recrystallization
M. R. Barnett, G. L. Kelly, P. D. Hodgson
Phase separation tendency in the as-solidified Zr3Al-Nb alloys studied by microstructural observations and thermodynamic analysis
R. Tewari, G. K. Dey, P. Mukhopadhyay, S. Banerjee, N. Prabhu
Flow stress and ductility of duplex stainless steel during high-temperature torsion deformation
L. Duprez, B. C. De Cooman, N. Akdut
Artificial neural network and finite element modeling of nanoindentation tests
Anastasia Muliana, Rami M. Haj-Ali, Rejanah Steward, Ashok Saxena
Fatigue-crack-propagation thresholds in a nickel-base superalloy at high frequencies and temperatures
A. Shyam, W. W. Milligan, S. A. Padula II, S. I. Marras
Lattice orientation relationship between the M2C carbide and the ferrite matrix in the M50NiL bearing steel
S. G. Song, H. Du, E. Y. Sun
Constitutive behavior of as-cast AA1050, AA3104, and AA5182
W. M. van Haaften, B. Magnin, W. H. Kool, L. Katgerman
Trap-governed hydrogen diffusivity and uptake capacity in ultrahigh-strength AERMET 100 steel
Richard L. S. Thomas, Daoming Li, Richard P. Gangloff, John R. Scully
The influence of minor elements on the weldability of an INCONEL 718-type superalloy
S. Benhadad, N. L. Richards, M. C. Chaturvedi
Dissolution kinetics of NbC particles in the heat-affected zone of type 347 austenitic stainless steel
Leijun Li, Robert W. Messler Jr.
A unified numerical modeling of stationary tungsten-inert-gas welding process
Manabu Tanaka, Hidenori Terasaki, Masao Ushio, John J. Lowke
Crack defect formation during manufacture of fused cast alumina refractories
Dominic Au, Steve Cockcroft, Daan Maijer
Joining of NiAl to iron-based alloys by reactive casting
Kiyotaka Matsuura, Masayuki Kudoh, Hiroshi Kinoshita, Heishichiro Takahashi
Two-phase modeling directed toward hot tearing formation in aluminum direct chill casting
Mohammed M’Hamdi, Asbjørn Mo, Christophe L. Martin
Solidification thermal parameters affecting the columnar-to-equiaxed transition
Cláudio A. Siqueira, Noé Cheung, Amauri Garcia
Phase evolution in laser-deposited titanium-chromium alloys
R. Banerjee, P. C. Collins, H. L. Fraser
Development of austenitic nanostructures in high-nitrogen steel powders processed by mechanical alloying
M. M. Cisneros, E. Valdés, D. Vázquez, H. F. López, H. Mancha, G. Mendoza, M. Méndez
Thermally enhanced and mechanically driven glass-formation reactions of multilayered Cu33Zr67 powders
M. Sherif El-Eskandarany, A. Inoue
Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy
Wen-Chung Li, Shun-Tian Lin, Cheng Liang
An investigation of microstructure and grain-boundary evolution during ECA pressing of pure aluminum
S. D. Terhune, D. L. Swisher, K. Oh-Ishi, Z. Horita, T. G. Langdon, T. R. McNelley
Sintering densification and microstructural evolution of injection molding grade 17-4 PH stainless steel powder
Yunxin Wu, Debby Blaine, Connie Schlaefer, Brian Marx, Randall M. German
Formation and annealing behavior of nanocrystalline ferrite in Fe-0.89C spheroidite steel produced by ball milling
Y. Xu, Z. G. Liu, M. Umemoto, K. Tsuchiya
Effect of fcc-hcp phase transformation produced by isothermal aging on the corrosion resistance of a Co-27Cr-5Mo-0.05C alloy
C. Montero-Ocampo, R. Juarez, A. Salinas Rodriguez
Effect of Zr addition on corrosion behavior of Cu-6Ni-2Mn-2Sn-2Al alloy
Youngik Seo, Sangshik Kim, Seungzeon Han, Changjoo Kim
A new hybrid process for surface modification by combining brush plating with nitrocarburizing
S. J. Dong, Y. Zhou, Y. W. Shi, L. Fan