Ausgabe 7/2007
Inhalt (33 Artikel)
John D. Hunt Symposium on Solidification Modeling and Microstructure Formation
D. Graham McCartney, Peter D. Lee, Qingyou Han
The Influence of Fluid Flow on the Microstructure of Directionally Solidified AlSi-Base Alloys
S. Steinbach, L. Ratke
Microstructural Evolution During Laser Resolidification of Fe-25 Atom Percent Ge Alloy
Krishanu Biswas, Kamanio Chattopadhyay
Phase-Field Study of the Cellular Bifurcation in Dilute Binary Alloys
Esteban Meca, Mathis Plapp
Eutectic Growth in Three Dimensions
H. Walker, Shan Liu, J. H. Lee, R. Trivedi
Phase Field Analysis of Eutectic Breakdown
J.R. Green, P.K. Jimack, A.M. Mullis
Modeling of Cast Iron Solidification—The Defining Moments
Doru M. Stefanescu
NanoSIMS Analysis of Trace Element Segregation during the Al-Si Eutectic Reaction
Christian J. Simensen, Øyvind Nielsen, François Hillion, Jorunn Voje
Characterization of Hypereutectic Al-Si Powders Solidified under Far-From Equilibrium Conditions
Y. E. Kalay, L. S. Chumbley, I. E. Anderson, R. E. Napolitano
In-Situ and Real-Time Investigation of Columnar-to-Equiaxed Transition in Metallic Alloy
H. Nguyen-Thi, G. Reinhart, N. Mangelinck-Noël, H. Jung, B. Billia, T. Schenk, J. Gastaldi, J. Härtwig, J. Baruchel
Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition
M. Wu, A. Ludwig
Natural Convection and Columnar-to-Equiaxed Transition Prediction in a Front-Tracking Model of Alloy Solidification
J. Banaszek, S. McFadden, D.J. Browne, L. Sturz, G. Zimmermann
Influence of Solidification Thermal Parameters on the Columnar-to-Equiaxed Transition of Aluminum-Zinc and Zinc-Aluminum Alloys
A.E. Ares, C.E. Schvezov
Laser Repair of Superalloy Single Crystals with Varying Substrate Orientations
S. Mokadem, C. Bezençon, A. Hauert, A. Jacot, W. Kurz
A Quest for a New Hot Tearing Criterion
D. G. Eskin, L. Katgerman
Solidification Condition Effects on Microstructures and Creep Resistance of Sn-3.8Ag-0.7Cu Lead-Free Solder
J. Liang, N. Dariavach, D. Shangguan
Measurement of Solid-Liquid Interfacial Energy for Solid Zn in Equilibrium with the ZnMg Eutectic Liquid
M. Erol, K. Keşlioğlu, N. Maraşli
Analysis of a Heat-Flux Differential Scanning Calorimetry Instrument
Adrian S. Sabau, Wallace D. Porter
Determination of the Solute Diffusion Coefficient by the Droplet Migration Method
Shan Liu, Jing Teng, Jeongyun Choi
An Evaluation of Measurements of Solid/Liquid Interfacial Energies in Metallic Alloy Systems by the Groove Profile Method
H. Jones
Effects of Deformation Processing on the Mechanical Properties of Aluminum Alloy 6063
Sanmbo A. Balogun, David E. Esezobor, Samson O. Adeosun
Recovering Grain-Boundary Inclination Parameters through Oblique Double Sectioning
E. R. Homer, B. L. Adams, R.H. Wagoner
Creep-Induced Microstructural Evolution and Acoustic Characterization in Tempered Martensitic Stainless Steel
Toshihiro Ohtani
Inertia Friction Welding Dissimilar Nickel-Based Superalloys Alloy 720Li to IN718
Z.W. Huang, H.Y. Li, M. Preuss, M. Karadge, P. Bowen, S. Bray, G. Baxter
Friction and Wear Mechanisms of Nanocrystalline Nickel in Ambient and Inert Atmospheres
Mehdi Shafiei, Ahmet T. Alpas
Modeling the Spray Forming of H13 Steel Tooling
Yaojun Lin, Kevin M. McHugh, Yizhang Zhou, Enrique J. Lavernia
In-Situ Response of WC-Ni Composites under Compressive Load
J.W. Paggett, A.D. Krawitz, E.F. Drake, M.A.M. Bourke, B. Clausen, D.W. Brown
Pulsed Plasma-Assisted Diffusion Bonding of Oxide Dispersion-Strengthened–FeCrAl Alloys
Gordon J. Tatlock, Eugene G. Dyadko, Sebastien N. Dryepondt, Ian G. Wright
A Novel Approach for Extracting and Characterizing Interfacial Reaction Products in Al-SiC p Composites
K.R. Ravi, R.M. Pillai, B.C. Pai, M. Chakraborty