Ausgabe 8/2010
Inhalt (31 Artikel)
Effect of the Amount of Gases on the Foaming Efficiency of Porous Aluminum Using Die Castings Fabricated by Friction Stir Processing
Yoshihiko Hangai, Hiroki Kato, Takao Utsunomiya, Soichiro Kitahara
Solute Diffusion Characteristics of a Rapid Hardening Al-Cu-Mg Alloy during the Early Stages of Age Hardening
R.K.W. Marceau, N. Tsafnat, D. Haley, S.P. Ringer
Examination of Multiphase (Zr,Ti)(V,Cr,Mn,Ni)2 Ni-MH Electrode Alloys: Part II. Solid-State Transformation of the Interdendritic B2 Phase
L. A. Bendersky, K. Wang, W. J. Boettinger, D. E. Newbury, K. Young, B. Chao
Texture and Crystal Orientation in Ti-6Al-4V Builds Fabricated by Shaped Metal Deposition
Bernd Baufeld, Omer Van der Biest, Steven Dillien
Influence of External Stress on Discontinuous Precipitation Behavior in a Cu-Ag Alloy
Ryoichi Monzen, Tadashi Terazawa, Chihiro Watanabe
Abnormal Grain Growth and Recrystallization in Al-Mg Alloy AA5182 Following Hot Deformation
Jung-Kuei Chang, Ken Takata, Koji Ichitani, Eric M. Taleff
Effects of Strain Rate and Test Temperature on Torsional Deformation Behavior of API X70 and X80 Linepipe Steels
Yongjin Kim, Sang Yong Shin, Yang Gon Kim, Nack J. Kim, Sunghak Lee
Effect of Ca and Rare Earth Elements on Impression Creep Properties of AZ91 Magnesium Alloy
B. Nami, H. Razavi, S. Mirdamadi, S.G. Shabestari, S.M. Miresmaeili
Ductile Fracture Prediction in Rotational Incremental Forming for Magnesium Alloy Sheets Using Combined Kinematic/Isotropic Hardening Model
Duc-Toan Nguyen, Jin-Gee Park, Young-Suk Kim
The Study of Fatigue Behaviors and Dislocation Structures in Interstitial-Free Steel
Chia-Chang Shih, New-Jin Ho, Hsing-Lu Huang
Effect of Heat Input Conditions on Microstructure and Mechanical Properties of Friction-Stir-Welded Pure Copper
P. Xue, G.M. Xie, B.L. Xiao, Z.Y. Ma, L. Geng
Low-Temperature Carburization of the Ni-base Superalloy IN718: Improvements in Surface Hardness and Crevice Corrosion Resistance
Reza Sharghi-Moshtaghin, Harold Kahn, Yindong Ge, Xiaoting Gu, Farrel J. Martin, Paul M. Natishan, Roy J. Rayne, Gary M. Michal, Frank Ernst, Arthur H. Heuer
Examination of Multiphase (Zr,Ti)(V,Cr,Mn,Ni)2 Ni-MH Electrode Alloys: Part I. Dendritic Solidification Structure
W.J. Boettinger, D.E. Newbury, K. Wang, L.A. Bendersky, C. Chiu, U.R. Kattner, K. Young, B. Chao
Criteria of Grain Refinement Induced by Ultrasonic Melt Treatment of Aluminum Alloys Containing Zr and Ti
T.V. Atamanenko, D.G. Eskin, L. Zhang, L. Katgerman
Modeling the Stress-Strain Behavior and Hot Tearing during Direct Chill Casting of an AZ31 Magnesium Billet
H. Hao, D.M. Maijer, M.A. Wells, Andre Phillion, S.L. Cockcroft
Effect of Aluminum Content on the Microstructure and Mechanical Properties of Hypereutectoid Steels
Yoon Soo Jang, M.P. Phaniraj, Dong-Ik Kim, Jae-Hyeok Shim, Moo-Young Huh
Microstructures and Properties of Carbon Refractories for Blast Furnaces with SiO2 and Al Additions
Yawei Li, Xilai Chen, Shaobai Sang, Yuanbing Li, Shengli Jin, Lei Zhao, Shan Ge
The Deformation of Clad Aluminum Sheet Produced By Direct Chill Casting
David J. Lloyd, Mark Gallerneault, Robert B. Wagstaff
Fabrication of Al-3.7 Pct Si-0.18 Pct Mg Foam Strengthened by AlN Particle Dispersion and its Compressive Properties
Yeong Hwan Song, Masakazu Tane, Takuya Ide, Yoshihiro Seimiya, Bo Young Hur, Hideo Nakajima
Study of Grain-Growth Kinetics in Delta-Ferrite and Austenite with Application to Thin-Slab Cast Direct-Rolling Microalloyed Steels
Tihe Zhou, Ronald J. O’malley, Hatem S. Zurob
Three-Dimensional Microstructure Visualization of Porosity and Fe-Rich Inclusions in SiC Particle-Reinforced Al Alloy Matrix Composites by X-Ray Synchrotron Tomography
Flávio de Andrade Silva, Jason J. Williams, Bernd R. Müller, Manfred P. Hentschel, Pedro D. Portella, Nikhilesh Chawla
Carbide Formation and Dissolution in Biomedical Co-Cr-Mo Alloys with Different Carbon Contents during Solution Treatment
Shingo Mineta, Shigenobu Namba, Takashi Yoneda, Kyosuke Ueda, Takayuki Narushima
Cyclic-Tension Fatigue Behavior in a Rolled AZ31B Magnesium Alloy Studied Using Ultrasonic Shear Waves
Hideki Yamagishi, Mikio Fukuhara, Hiroaki Matsumoto, Akihiko Chiba
Nanograined/Ultrafine-Grained Structure and Tensile Deformation Behavior of Shear Phase Reversion-Induced 301 Austenitic Stainless Steel
R.D.K. Misra, S. Nayak, P.K.C. Venkatasurya, V. Ramuni, M.C. Somani, L.P. Karjalainen