Mineralogical and geotechnical characterization of swelling marly clays of the Medea region of Algeria

This paper presents the approach followed for the geological, mineralogical, and geotechnical characterization of swelling marly clays in the Médéa region. This investigation is conducted in order to estimate the swelling potential of this marly clay layer. The studied sites, located at about 80 km south of Algiers, Algeria, cover an area of approximatively 400 hectares. Five sites are considered. In the first step, the geological, tectonic, climatic, and hydrological contexts of the region are described. According to the geological map of Médéa, most of the formations encountered in the area are composed of Miocene layers represented by marly clays (Fig. 2). This region is characterized by its high and low temperature in summer and winter, respectively, and variable humidity (Fig. 3). In a second step, the results of geotechnical studies, X-ray diffraction tests, chemical analyses, and scanning electron microscope (SEM) observations are presented (Figs. 3, 4, 5, 6, 7, 8, 9). The soils contain quartz (20–26 %), calcium carbonates (11–55 %), kaolinite (8–13 %), illite (6–14 %) and Montmorillonite (18–26 %). The study of their microstructure by means of SEM indicates that these soils are formed by a compact marly clay matrix that is relatively homogeneous and oriented in the dip direction of bedding. A grain size analysis shows that the clay content varies between 17 and 70 %. The water content of all samples varies between 8 and 30 %. The values of the liquidity limit (LL) and plasticity index (PI) vary between 28–76 % and 16–36 % respectively, indicating a highly plastic soil; this is also confirmed by a specific surface varying between 99 and 179 m²/g. The dry density γ _d varies between 15 and 19 kN/m³. The swelling potential of the marly clay samples is evaluated firstly using various indirect methods. In literature, a number of empirical classifications are proposed by different authors (BRE 1980; Chen 1988; Komornik and David 1969; Seed et al. 1962; Snethen 1984; Vijayvergiya et Ghazzaly 1973 et Williams and Donaldson 1980). The swelling potential is related to certain physical properties of soils, such as consistency limits, clay content, methylene blue value, etc. In general, these methods indicate that all the tested soils have a high swelling potential, which confirms the results of mineralogical analysis. Secondly, direct measurements of swelling parameters are performed. Swelling tests are carried out using a standard slaved one-dimensional odometer using two methods: free swell and constant volume, according to standard ASTM D 4546-90 and AFNOR (1995). The swell pressure, the swell percentage and the swell index are given in Fig. 16. It is noted that the soils develop very significant swell pressures which vary between 25 and 900 kPa. This is in agreement with the results obtained by empirical methods. This investigation clearly shows that the marly clays of the Médéa region have a high swelling potential. Therefore, taking into account the phenomenon of soil swelling in structure design is essential.