nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Model and Analysis of the Grinding Wheels Transformation in Double-Disk Grinding

verfasst von : L. G. Vainer

Erschienen in: Proceedings of the 4th International Conference on Industrial Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The article is dedicated to double-disk grinding (DDG)—efficient and prevailing tooling method for processing workpieces with parallel end surfaces including bearing rings and rollers. At grinding of the flow of blanks, such as rings and rollers, starting from a certain point in time, there is an increase in processing errors and their out-of-range tolerance. One of the main causes is the uneven wear of the grinding wheels (GWs). To solve the problem of increasing the stability of the rational form of GW, the following tasks were set and solved: (a) development of a mathematical and simulation model for the transformation of the generating surface GW for two basic DDG schemes: with circular and rectilinear feed; (b) theoretical and experimental analysis of the regularities of GW transformation. As a result of theoretical and experimental studies, a typical shape of the worn-out surface of the GW is established for grinding the ends of the bearing rings. It is established that grinding wheels with a modified parabolic profile have better shape stability than flat ones.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Use of Vibro-acoustic Monitoring for Stabilization Stress–Strain State of Surface Layer of Workpiece During Cutting

Nächstes Kapitel New Generation Magnetorheological, Magnetodynamic, and Ferrofluid Control Devices with Nonstationary Electromagnetic Fields

Malkin S (1989) Grinding technology. Theory and application of machining with abrasives. Amer Society of Civil Engineers, New York

Vogt HR (1976) High efficiency, high precision grinding of parallel surfaces. In: Koenigsberger F, Tobias SA (eds) Proceedings of the sixteenth international machine tool design and research conference. Palgrave, LondonCrossRef

Sukharev VM, Denisov AS (1977) Dvustoronnee shlifovanie (Bilateral grinding). Tekhnika, Kiev

Matsui S (1981) Study on face grinding. Technology reports. Tohoku Univ 46(1):111–126MathSciNet

Shakhnovskiy SS (1989) Balance of heat flows in the face grinding machine. Mach Tool 6:13–15 (in Russian)

Andrianova IA, Shakhnovskiy SS (1982) Effect of thermal deformations on the position of grinding wheels of the face grinding machine. Mach Tool 9:6–7 (in Russian)

Nikitina IP, Shakhnovskiy SS (1992) Thermal deformations of bilateral face grinding machines. Mach Tool 7:14–16 (in Russian)

Wick C (1978) Advances in double disc grinding. Manuf Eng 80(6):46–53

Vainer LG, Nosenko VA (2013) Analysis of the wear patterns of grinding wheels in the bilateral treatment of the ends of the bearing rings. Bull Pac Nat Univ 3(30):111–118 (in Russian)

10.

Samarin UP, Filin AN, Rakhcheev VG (1999) Technological support of accuracy of complex surfaces of precision parts in abrasive processing. Mashinostroenie, Moskcow (in Russian)

11.

Salov PM, Kravchenko BA (2001) The principles of self-organization of the grinding wheel wear. Samar Gos Tekhn Un-t, Samara (in Russian)

12.

Nagao T (1979) Erforschung des mechanismus beim stirnschleifen. Werkstatt und Betrieb 112(6):655–660

13.

Vainer LG (2011) Determining the parameters of the technological space in bilateral end grinding. Russ Eng Res 21(12):1233–1238CrossRef

14.

Vainer LG (2013) Margin removal in grinding the ends of single blank. Russ Eng Res 33(3):140–143CrossRef

15.

Vainer LG, Nosenko VA (2015) The regularities of grinding wheels wear at in-line machining of bearing rings ends. In: Proceedings of 2015 international conference on mechanical engineering, automation and control systems—MEACS 2015, Tomsk Polytechnic University, Tomsk, 1–4 Dec 2015

16.

Vainer LG (2012) Device for two-sided grinding of the ends of parts. Patent RU 121465, 26 Dec 2011

Titel: Model and Analysis of the Grinding Wheels Transformation in Double-Disk Grinding
verfasst von: L. G. Vainer
Verlag: Springer International Publishing
Buch: Proceedings of the 4th International Conference on Industrial Engineering
Print ISBN: 978-3-319-95629-9

Electronic ISBN: 978-3-319-95630-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95630-5_144

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht