nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Modelling of Cutting Forces in Ball-End Milling

verfasst von : A. V. Vyboishchik

Erschienen in: Proceedings of the 4th International Conference on Industrial Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Manufacturing multiple freeform surfaces’ parts, viz. dies, moulds, blades, impellers, metal models, etc., is both one of the most time-consuming and difficult methods of machining processes existing today. Since the surfaces subject to machining have various elements and their shapes are very complex, the material layer removed at the machining process is uneven. The main parameters influencing the surface quality are the values and the directions of normal and tangential components of the cutting force described in the paper. A set of equations stating the interrelation between the normal component of the cutting force and the geometrical parameters of the cutting zone is given. The analytical and later numerical solution of the set of equations allows mathematical modelling of the force parameters during freeform surface machining, which, consequently, will allow for the further investigation concerning mathematical modelling of a surface topology and, as a result, prediction of the obtaining surface accuracy and roughness.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Forecast of Frictional Bonds Abnormal Status

Nächstes Kapitel Simulation of Ion Transfer During Electrochemical Shaping by Ultrashort Pulses

He G, Ma W, Yu G, Lang A (2014) Modeling and experimental validation of cutting forces in five-axis ball-end milling based on true tooth trajectory. Int J Adv Manuf Technol 78(1–4):189–197. https://doi.org/10.1007/s00170-014-6548-2CrossRef

Boz Y, Erdim H, Lazoglu I (2011) Modeling cutting forces for five axis milling of sculptured surfaces (Conference Paper). Adv Mater Res 223:701–712. https://doi.org/10.4028/www.scientific.net/AMR.223.701CrossRef

Ko T, Kim H, Lee S (2001) Selection of the machining inclination angle in high-speed ball end milling. Int J Adv Manuf Technol 17:163–170. https://doi.org/10.1007/PL00003943CrossRef

Kang M, Kim K, Lee D et al (2001) Characteristics of inclined planes according to the variations of cutting direction in high-speed ball-end milling. Int J Adv Manuf Technol 17:323–329. https://doi.org/10.1007/s001700170166CrossRef

Ji W, Liu X, Wang L et al (2016) Research on modelling of ball-nosed end mill with chamfered cutting edge for 5-axis grinding. Int J Adv Manuf Technol 87(9–12):2731–2744. https://doi.org/10.1007/s00170-016-8631-3CrossRef

Ghariblu H, Abedi SJ (2014) A new layered manufacturing machine with cutting force analysis in tapered end milling. J Mech Sci Technol 28(8):3087–3093. https://doi.org/10.1007/s12206-014-0716-zCrossRef

Zeroudi N, Fontaine M (2013) Prediction of tool deflection and tool path compensation in ball-end milling. J Intell Manuf 17:3. https://doi.org/10.1007/s10845-013-0800-8CrossRef

Onozuka H, Utsumi K, Kono I, Hirai J, Numata Y, Obikawa T (2015) High speed milling processes with long oblique cutting edges. J Manuf Process 17:95–101. https://doi.org/10.1016/j.jmapro.2015.06.004CrossRef

Dikshit MK, Puri AB, Maity A (2017) Analysis of cutting force coefficients in high-speed ball end milling at varying rotational speeds. Mach Sci Technol 21(3):416–435. https://doi.org/10.1080/10910344.2017.1284562CrossRef

10.

Mikó B, Beňo J (2014) Effect of the working diameter to the surface quality in free-form surface milling (Conference Paper). Key Eng Mater 581:372–377. https://doi.org/10.4028/www.scientific.net/KEM.581.372CrossRef

11.

Tsai C-L, Liao Y-S (2008) Prediction of cutting forces in ball-end milling by means of geometric analysis. J Mater Process Technol 205:24–33. https://doi.org/10.1016/j.jmatprotec.2007.11.083CrossRef

12.

Guillemot N, Mawussi BK, Lartigue C et al (2013) A first approach to characterize the surface integrity generated by ball-end finishing milling. Int J Adv Manuf Technol 64(1–4). https://doi.org/10.1007/s00170-012-4017-3CrossRef

13.

Cao Q, Xue D, Zhao J et al (2011) A cutting force model considering influence of radius of curvature for sculptured surface machining. Int J Adv Manuf Technol 54:821–835. https://doi.org/10.1007/s00170-016-9273-1CrossRef

14.

Cao QY, Zhao J, Zhu LH (2016) The effect of curvature radius of sculptured surface on finish milling tool path selection. Int J Adv Manuf Technol 89(9–12). https://doi.org/10.1007/s00170-016-9273-1CrossRef

15.

Wojciechowski S (2014) The estimation of cutting forces and specific force coefficients during finishing ball end milling of inclined surfaces. Int J Mach Tools Manuf 89. https://doi.org/10.1016/j.ijmachtools.2014.10.006CrossRef

16.

Zhang XF, Xie J, Xie HF et al (2011) Experimental investigation on various tool path strategies influencing surface quality and form accuracy of CNC milled complex freeform surface. Int J Adv Manuf Technol 59(5):647–654. https://doi.org/10.1007/s00170-011-3515-zCrossRef

17.

Quinsat Y, Sabourin L (2006) Optimal selection of machining direction for three-axis milling of sculptured parts. Int J Adv Manuf Technol 27(11):1132–1139. https://doi.org/10.1007/s00170-004-2297-yCrossRef

18.

Fu Z, Yang W, Wang X, Leopold J (2015) An analytical force model for ball-end milling based on a predictive machining theory considering cutter runout. Int J Adv Manuf Technol 84(9–12). https://doi.org/10.1007/s00170-015-7888-2CrossRef

19.

Kasahara K, Ohtaka K, Ito S, Hirota A (2014) Influence of tool tilting angles on cutting forces and tool deflection in ball end milling (3rd Report). J Jpn Soc Precis Eng 80(2):209–213. https://doi.org/10.2493/jjspe.80.209CrossRef

20.

Vyboishchik A (2016) Modelling topology of freeform surfaces with ball-end milling. Proc Eng 150:761–767. https://doi.org/10.1016/j.proeng.2016.07.103CrossRef

21.

Vyboishchik A (2017) The influence of dynamical parameters on surface quality during ball-end milling. Proc Eng 206:1029–1033. https://doi.org/10.1016/j.proeng.2017.10.589CrossRef

Titel: Modelling of Cutting Forces in Ball-End Milling
verfasst von: A. V. Vyboishchik
Verlag: Springer International Publishing
Buch: Proceedings of the 4th International Conference on Industrial Engineering
Print ISBN: 978-3-319-95629-9

Electronic ISBN: 978-3-319-95630-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95630-5_119

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht