nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

16.04.2021 | ORIGINAL ARTICLE

Multi-object optimization of EDM by Taguchi-DEAR method using AlCrNi coated electrode

verfasst von: Nguyen Huu Phan, Pham Van Dong, Hoang Tien Dung, Nguyen Van Thien, T. Muthuramalingam, Shailesh Shirguppikar, Nguyen Chi Tam, Nguyen Trong Ly

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 5-6/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In electrical discharge machining (EDM), the productivity and machined surface quality is directly influenced by the properties of the electrode surface material layer used. In the present study, a research attempt was made to find the optimal technological parameters in EDM process with AlCrNi coated electrode using Taguchi-Data Envelopment Analysis based Ranking (DEAR) based multi-response optimization approach. From the experimental investigation, the optimal technological parameter combination in EDM using AlCrNi coated electrode was found as peak current (40 A), voltage (55 V), and pulse-on-time (1000 μs) on machining Ti-6Al-4V titanium alloy. The current was found as more principal factor in EDM process with coated tool due to the electrical conductance of the tool coating. The better surface topography with lower surface roughness and micro cracks can be obtained on the machined specimens with proposed parameter combination.

Vorheriger Artikel Overview on development of acoustic emission monitoring technology in sawing

Nächster Artikel A new burr formation model for drilling with tool wear

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Mandal P, Mondal SC (2019) Surface characteristics of mild steel using EDM with Cu-MWCNT composite electrode. Mater Manuf Process 34(12):1326–1332. https://doi.org/10.1080/10426914.2019.1605179CrossRef

Jothimurug R, Amirthagad KS, Daniel J (2012) Performance of silver coated copper tool with kerosene-servotherm dielectric in EDM of monel 400TM. J Appl Sci 12(10):999–1005. https://doi.org/10.3923/jas.2012.999.1005CrossRef

Liu Y, Wang W, Zhang W, Ma F, Yang D, Sha Z, Zhang S (2019) Experimental study on electrode wear of diamond-nickel coated electrode in EDM small hole machining. Adv Mater Sci Eng 2019:1–10. https://doi.org/10.1155/2019/7181237CrossRef

Panchal DL, Biradar SK, Gosavi VY (2016) Analysis of EDM process parameters by using coated electrodes. Int J Eng Trends Technol 41(4):181–185CrossRef

Rashid A, Bilal A, Liu C, Jahan MP, Talamona D, Perveen A (2019) Effect of conductive coatings on micro-electro-discharge machinability of aluminum nitride ceramic using on-machine-fabricated microelectrodes. Materials 12(20):3316. https://doi.org/10.3390/ma12203316CrossRef

Ablyaz TR, Shlykov ES, Kremlev SS (2017) Copper-coated electrodes for electrical discharge machining of 38X2H2MA steel. Russ Eng Res 37(10):910–911 https://link.springer.com/article/10.3103/S1068798X17100033CrossRef

Uhlmann E, Langmack M, Garn R, Oberschmidt D, Fecher J, Rosiwal S M, Singer R F (2011) Using diamond coated tool-electrodes for drilling micro holes with EDM, 11th International Conference of the European Society for Precision Engineering and Nanotechnology 2011. Proceedings. Vol.2: May 23rd - 26th 2011, Como, Italy; conference proceedings

Khan F, Soota T (2020) Optimization of EDM process parameter for stainless steel D3. Mater Today Proc 25:635–638. https://doi.org/10.1016/j.matpr.2019.07.529CrossRef

Bhardwaj B, Sharma V, Kumar S, Dutt S (2021) Multiresponse optimization of EDM machining parameters using Taguchi methodology with grey relational analysis. In: Optimization Methods in Engineering. Springer, Singapore, pp 349–357 https://link.springer.com/chapter/10.1007/978-981-15-4550-4_21CrossRef

10.

Meena VK (2006) Optimization of EDM machining parameters using DMLS electrode. Rapid Prototyp J 12(4):222–228. https://doi.org/10.1108/13552540610682732CrossRef

11.

Majumder H, Maity K (2017) Optimization of machining condition in WEDM for titanium grade 6 using MOORA coupled with PCA—a multivariate hybrid approach. J Adv Manuf Syst 16(02):81–99. https://doi.org/10.1142/S0219686717500068CrossRef

12.

Kandpal BC, Kumar J, Singh H (2017) Optimization and characterization of EDM of AA 6061/10% Al2O3 AMMC using Taguchi’s approach and utility concept. Prod Manuf Res 5(1):351–370. https://doi.org/10.1080/21693277.2017.1389315CrossRef

13.

Faisal N, Kumar K (2018) Optimization of machine process parameters in EDM for EN 31 using evolutionary optimization techniques. Technologies 6(2):54. https://doi.org/10.3390/technologies6020054CrossRef

14.

Natarajan N, Arunachalam RM (2011) Optimization of micro-EDM with multiple performance characteristics using Taguchi method and Grey relational analysis. J Sci Ind Res 70:500–505 http://nopr.niscair.res.in/handle/123456789/12065

15.

Balraj US, Krishna AG (2014) Multi-objective optimization of EDM process parameters using Taguchi method, principal component analysis and grey relational analysis. Int J Manuf Mater Mech Eng 4(2):29–46. https://doi.org/10.4018/ijmmme.2014040103CrossRef

16.

MeenaV K, Azad MS, Singh S, Singh N (2017) Micro-EDM multiple parameter optimization for Cp titanium. Int J Adv Manuf Technol 89(1-4):897–904 https://link.springer.com/article/10.1007%2Fs00170-016-9130-2CrossRef

17.

Pragadish N, Kumar MP (2016) Optimization of dry EDM process parameters using grey relational analysis. Arab J Sci Eng 41(11):4383–4390 https://link.springer.com/article/10.1007/s13369-016-2130-6CrossRef

18.

Bhaumik M, Maity K (2020) Multi-response optimization of EDM parameters using grey relational analysis (GRA) for Ti-5Al-2.5 Sn titanium alloy. World J Eng. https://doi.org/10.1108/WJE-06-2020-0210

19.

Golshan A, Ghodsiyeh D, Izman S (2015) Multi-objective optimization of wire electrical discharge machining process using evolutionary computation method: effect of cutting variation. Proc IMechE Part B:J Eng Manuf 229(1):75–85. https://doi.org/10.1177/0954405414523593CrossRef

20.

Kumar SD, Ravichandran M (2018) Synthesis, Characterization and Wire Electric Erosion Behaviour of AA7178-10 wt.% ZrB 2 Composite. Silicon 10(6):2653–2662. https://doi.org/10.1007/s12633-018-9802-7CrossRef

21.

Durairaj M, Sudharsun D, Swamynathan N (2013) Analysis of process parameters in wire EDM with stainless steel using single objective Taguchi method and multi objective grey relational grade. Procedia Eng 64:868–877. https://doi.org/10.1016/j.proeng.2013.09.163CrossRef

22.

Khanna R, Kumar A, Garg MP, Singh A, Sharma N (2015) Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory. J Ind Eng Int 11(4):459–472 https://link.springer.com/article/10.1007/s40092-015-0112-zCrossRef

23.

Yusoff Y, Zain AM, Ngadiman MS (2016) Computational approach for multi performances optimization of EDM. MATEC Web Conf EDP Sci 78(1):01014–01020. https://doi.org/10.1051/matecconf/20167801014CrossRef

24.

Soni H, Narendranath S, Ramesh MR (2018) ANN and RSM modeling methods for predicting material removal rate and surface roughness during WEDM of Ti50Ni40Co10 shape memory alloy. AMSE J IIETA Adv A 54(3):435–443. https://doi.org/10.18280/ama_a.540304CrossRef

25.

Tiwary AP, Pradhan BB, Bhattacharyya B (2014) Application of multi-criteria decision making methods for selection of micro-EDM process parameters. Adv Manuf 2(3):251–258 https://link.springer.com/content/pdf/10.1007/s40436-013-0050-1CrossRef

26.

Hanif M, Ahmad W, Hussain S, Jahanzaib M, Shah AH (2019) Investigating the effects of electric discharge machining parameters on material removal rate and surface roughness on AISI D2 steel using RSM-GRA integrated approach. Int J Adv Manuf Technol 101(5):1255–1265 https://link.springer.com/article/10.1007/s00170-018-3019-1CrossRef

27.

Pradhan MK (2013) Estimating the effect of process parameters on MRR, TWR and radial overcut of EDMed AISI D2 tool steel by RSM and GRA coupled with PCA. Int J Adv Manuf Technol 68(1-4):591–605 https://link.springer.com/article/10.1007%2Fs00170-013-4780-9CrossRef

28.

Sivapirakasam SP, Mathew J, Surianarayanan M (2011) Multi-attribute decision making for green electrical discharge machining. Expert Syst Appl 38(7):8370–8374. https://doi.org/10.1016/j.eswa.2011.01.026CrossRef

29.

Manivannan R, Kumar MP (2016) Multi-response optimization of micro-EDM process parameters on AISI304 steel using TOPSIS. J Mech Sci Technol 30(1):137–144 https://link.springer.com/article/10.1007%2Fs12206-015-1217-4CrossRef

30.

Manivannan R, Kumar MP (2017) Multi-attribute decision-making of cryogenically cooled micro-EDM drilling process parameters using TOPSIS method. Mater Manuf Process 32(2):209–215. https://doi.org/10.1080/10426914.2016.1176182CrossRef

31.

Raj SON, Prabhu S (2017) Analysis of multi objective optimisation using TOPSIS method in EDM process with CNT infused copper electrode. Int J Mach Mach Mater 19(1):76–94. https://doi.org/10.1504/IJMMM.2017.081190CrossRef

32.

Payal H, Maheshwari S, Bharti PS, Sharma SK (2019) Multi-objective optimisation of electrical discharge machining for Inconel 825 using Taguchi-fuzzy approach. Int J Inf Technol 11(1):97–105. https://doi.org/10.1007/s41870-018-0102-7CrossRef

33.

Anitha J, Dasa R, Pradhan MK (2016) Multi-objective optimization of electrical discharge machining processes using artificial neural network. Jordan J Mech Ind Eng 10(1)

34.

Manoj M, Jinu GR, Muthuramalingam T (2018) Multi response optimization of AWJM process parameters on machining TiB 2 particles reinforced Al7075 composite using Taguchi-DEAR methodology. Silicon 10(5):2287–2293 https://link.springer.com/article/10.1007/s12633-018-9763-xCrossRef

35.

Muthuramalingam T, Vasanth S, Vinothkumar P, Geethapriyan T, Rabik MM (2018) Multi criteria decision making of abrasive flow oriented process parameters in abrasive water jet machining using Taguchi–DEAR methodology. Silicon 10(5):2015–2021. https://doi.org/10.1007/s12633-017-9715-xCrossRef

36.

Thangaraj M, Loganathan G B, Atif A, Palanisamy S (2019) Multi response optimization on machining titanium alloy using Taguchi-DEAR analysis in abrasive water jet cutting (No. 2019-28-0070). SAE Technical Paper. https://www.sae.org/publications/technical-papers/content/2019-28-0070/

37.

Nguyen PH, Banh TL, Mashood KA, Tran DQ, Muthuramalingam T, Nguyen DT (2020) Application of TGRA-based optimisation for machinability of high-chromium tool steel in the EDM process. Arab J Sci Eng 45(7):5555–5562. https://doi.org/10.1007/s13369-020-04456-zCrossRef

38.

Phan NH, Muthuramalingam T (2020) Multi criteria decision making of vibration assisted EDM process parameters on machining silicon steel using Taguchi-DEAR methodology. Silicon:1–7. https://doi.org/10.1007/s12633-020-00573-4

39.

Muthuramalingam T (2019) Measuring the influence of discharge energy on white layer thickness in electrical discharge machining process. Measurement 131:694–700. https://doi.org/10.1016/j.measurement.2018.09.038CrossRef

40.

Warcholinski B, Gilewicz A, Myslinski P, Dobruchowska E, Murzynski D (2020) Structure and properties of AlCrN coatings deposited using cathodic arc evaporation. Coatings 10(8):793. https://doi.org/10.3390/coatings10080793CrossRef

41.

Kumar S, Singh R, Singh TP, Sethi BL (2009) Surface modification by electrical discharge machining: a review. J Mater Process Technol 209(8):3675–3687. https://doi.org/10.1016/j.jmatprotec.2008.09.032CrossRef

Titel: Multi-object optimization of EDM by Taguchi-DEAR method using AlCrNi coated electrode
verfasst von: Nguyen Huu Phan
Pham Van Dong
Hoang Tien Dung
Nguyen Van Thien
T. Muthuramalingam
Shailesh Shirguppikar
Nguyen Chi Tam
Nguyen Trong Ly
Publikationsdatum: 16.04.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 5-6/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07032-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5-6/2021

A novel polishing technology for leading and trailing edges of aero-engine blade

A path planning method of lattice structural components for additive manufacturing

Real-time chatter detection via iterative Vold-Kalman filter and energy entropy

Finite element analysis of material flow in flat-rivet clinching process

Investigating governing parameters influencing solidification process in pulsed laser micro-welding of AISI 316L thin foils using finite element method

Investigation on machinability of NiTi shape memory alloys under different cooling conditions

Premium Partner

Marktübersichten