nach oben

Erschienen in:

2023 | OriginalPaper | Buchkapitel

Multi-objective Optimization in Internal Grinding SKD11 Tool Steel in Terms of Surface Roughness, Material Removal Rate and Wheel Life

verfasst von : Tran Huu Danh, Nguyen Hong Linh, Bui Thanh Danh, Nguyen Anh Tuan, Do Thi Tam, Hoang Xuan Tu, Le Xuan Hung

Erschienen in: Advances in Engineering Research and Application

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This paper presents a multi-objective study on the determination of optimum dressing parameters for internal grinding. The aim of this study is to achieve minimum surface roughness (SR), maximum material removal rate (MRR) and maximum wheel life (WL) concurrently. To accomplish the stated goal, six input dressing parameters including coarse dressing depth a_r, coarse dressing time n_r, fine dressing depth a_f, fine dressing time n_f, non-feeding dressing n₀, and dressing feed rate S_d were taken into account. The effect of the parameters on the SR, MRR and WL of the grinding process was evaluated. Furthermore, the optimal input parameters to achieve the mentioned objectives were proposed. It was also reported that the proposal optimal dressing parameters were suitable for use.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Multi-criteria Decision Making in Wire-EDM Process Using MARCOS Method

Nächstes Kapitel Novel Energy Efficient Schemes for Wireless Sensor Networks Utilizing Mobile Sensors

Hung, L.X., et al.: Determining the optimum set of dressing parameters satisfying minimum surface roughness when conducting the internal grinding of hardened SKD11 steel. In: Solid State Phenomena. Trans Tech Publications (2021)

Zhang, K., Yu, Y., Wang, W., Li, H.: Experimental study on internal cylindrical grinding of bearing steel with electrolytic in-process dressing grinding. Int. J. Adv. Manuf. Technol. 81(5), 1175–1185 (2015). https://doi.org/10.1007/s00170-015-7297-6CrossRef

Hung, L.X., et al.: Optimum dressing parameters for maximum material removal rate when internal cylindrical grinding using Taguchi method. Int. J. Mech. Eng. Technol. (IJMET) 9(12), 123–129 (2018)

Jeevanantham, S., et al.: A study on characteristics of parameters influencing internal grinding process with MRR. Indian J. Sci. Technol. 9(37), 1–7 (2016)CrossRef

Hung, L.X., et al.: Determination of optimal exchanged grinding wheel diameter when internally grinding alloy tool steel 9CrSi. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing (2018)

Tran, T.-H., et al.: Optimization of replaced grinding wheel diameter for minimum grinding cost in internal grinding. Appl. Sci. 9(7), 1363 (2019)CrossRef

Hung, L.X., et al.: A study on calculation of optimum exchanged grinding wheel diameter when internal grinding. Mater. Today: Proc. 18, 2840–2847 (2019)

Hung, L.X., et al.: Optimization of manufacturing time in internal grinding. In: Sattler, K.-U., Nguyen, D.C., Vu, N.P., Tien Long, B., Puta, H. (eds.) ICERA 2019. LNNS, vol. 104, pp. 557–565. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-37497-6_63CrossRef

Akintseva, A., Pereverzev, P.: Modeling the influence of the circle overtravel on the stability of internal grinding process. Procedia Eng. 206, 1179–1183 (2017)CrossRef

10.

Hung, L.X., et al.: Multi-objective optimization of dressing parameters of internal cylindrical grinding for 9CrSi alloy steel using Taguchi method and grey relational analysis. Mater. Today: Proc. 18, 2257–2264 (2019)

11.

Nguyen, A.T., et al.: Optimization of dressing parameters for minimum surface roughness and maximum material removal rate in internal grinding of SKD11 tool steel. In: E3S Web of Conferences. EDP Sciences (2021)

12.

Jeevanantham, S., et al.: Optimization of internal grinding process parameters on C40E steel using Taguchi technique. Int. J. Appl. Eng. Res. 12(19), 8660–8664 (2017)

13.

Hung, L.X., et al.: A study on coolant parameters in internal grinding of 9CrSi steel. In: Materials Science Forum. Trans Tech Publications (2019)

14.

Nguyen, H.-Q., et al.: A comparative study on multi-criteria decision-making in dressing process for internal grinding. Machines 10(5), 303 (2022)CrossRef

Titel: Multi-objective Optimization in Internal Grinding SKD11 Tool Steel in Terms of Surface Roughness, Material Removal Rate and Wheel Life
verfasst von: Tran Huu Danh
Nguyen Hong Linh
Bui Thanh Danh
Nguyen Anh Tuan
Do Thi Tam
Hoang Xuan Tu
Le Xuan Hung
Verlag: Springer International Publishing
Buch: Advances in Engineering Research and Application
Print ISBN: 978-3-031-22199-6

Electronic ISBN: 978-3-031-22200-9

Copyright-Jahr: 2023
DOI: https://doi.org/10.1007/978-3-031-22200-9_75

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht