nach oben

Erschienen in:

2015 | OriginalPaper | Buchkapitel

3. Multifunctional Properties of Bulk Nanostructured Metallic Materials

verfasst von : I. Sabirov, N. A. Enikeev, M. Yu. Murashkin, R. Z. Valiev

Erschienen in: Bulk Nanostructured Materials with Multifunctional Properties

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter focuses on multifunctional properties of bulk nanostructured metallic materials and structure–properties relationship therein. The most important structural factors affecting mechanical, physical, and chemical properties of the nanomaterials are discussed, and the strategies to their further improvement are outlined. Special attention is paid to nanostructural design for simultaneous improvement of mutually exclusive properties.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Nanostructures in Materials Subjected to Severe Plastic Deformation

Nächstes Kapitel Bulk Nanostructured Metals for Innovative Applications

It should be noted that size of specimens is the main limitation for investigation of fatigue behavior of SPD-processed nanostructured metallic materials. Thus, in most of investigations, ECAP-processed objects were studied, which have size sufficient for the preparation of fatigue specimens. However, very recent modifications and/or upscaling of other SPD techniques, such as HPT, allowed fabrication of larger samples. Research on fatigue behavior of nanostructured metallic materials produced by other SPD techniques has just started [84].

Hall, E.O.: The deformation and ageing of mild steel: III discussion of results. Proc. Phys. Soc. B 64, 747 (1951)

Petch, N.J.: The cleavage strength of polycrystals. J Iron Steel Inst. 174, 25 (1953)

Valiev, R.Z.: Structure and mechanical properties of ultrafine grained metals. Mater. Sci. Eng. 59, A234–A236 (1997)

Valiev, R.Z., Langdon, T.G.: Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog. Mater Sci. 51, 881 (2006)

Morris, D.G. In: Whang, S.H. (ed.) Nanostructured Metals and Alloys. Processing, Microstructure, Mechanical Properties and Applications, p. 297. Woodhead Publishing Limited, Cambridge (2011)

Zhu, Y.T., Han, B.Q., Lavernia, E.J.: In: Zehetbauer, M.J., Zhu, Y.T. (eds.) Bulk Nanostructured Materials, p. 89. WILEY-VCH Verlag GmbH & Co, Weinheim (2009)

Ovid’ko, I.A. In: Whang, S.H. (ed.) Nanostructured Metals and Alloys. Processing, Microstructure, Mechanical Properties and Applications, p. 430. Woodhead Publishing Limited, Cambridge (2011)

Zehetbauer, M.J., Estrin, Y.: In: Zehetbauer, M.J., Zhu, Y.T. (eds.) Bulk Nanostructured Materials, p. 109. WILEY-VCH Verlag GmbH & Co, Weinheim (2009)

Koch, C.C. In: Zehetbauer, M.J., Zhu Bulk, Y.T. (eds.) Nanostructured Materials, p. 3. WILEY-VCH Verlag GmbH & Co, Weinheim (2009)

10.

Pande, C., Cooper, K.: Nanomechanics of Hall-Petch relationship in nanocrystalline materials. Prog. Mater Sci. 54, 689 (2009)

11.

Mayers, M.A., Mishra, A., Benson, D.J.: Mechanical properties of nanocrystalline materials. Prog. Mater Sci. 51, 427 (2006)

12.

Valiev, R.Z., Enikeev, N.A., Murashkin, M.Y., Kazykhanov, V.U., Sauvage, X.: On the origin of extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation. Scripta Mater. 63, 949 (2010)

13.

Valiev, R.Z., Enikeev, N.A., Murashkin, M.Y., Aleksandrov, S.E., Goldshtein, R.V.: Superstrength of ultrafine-grained aluminum alloys produced by severe plastic deformation. Doklady Phys. 55(6), 267 (2010)

14.

Valiev, R.Z., Langdon, T.G.: The art and science of tailoring materials by nanostructuring for advanced properties using SPD techniques. Adv. Eng. Mater. 12, 677 (2010)

15.

Valiev, R.Z., Enikeev, N.A., Langdon, T.G.: Towards superstrength of nanostructured metals and alloys produced by SPD. Kovove Mater. 49, 1 (2011)

16.

Krasilnikov, N., Lojkowski, W., Pakiela, Z., Valiev, R.Z.: Tensile strength and ductility of ultrafine-grained nickel processed by severe plastic deformation. Mater. Sci. Eng., A 37, 330 (2005)

17.

Thompson, A.W.: Yielding in nickel as a function of grain or cell size. Acta Metall. 23, 1337 (1975)

18.

Xiao, C., Mirshams, R.A., Whang, S.H., Yin, W.M.: Tensile behavior and fracture in nickel and carbon doped nanocrystalline nickel. Mater. Sci. Eng., A 301, 35 (2001)

19.

Ebrahimi, F., Bourne, G.R., Kelly, M.S., Matthews, T.E.: Mechanical properties of nanocrystalline nickel produced by electrodeposition. Nanostr. Mater. 11, 343 (1999)

20.

Hughes, D.A., Hansen, N.: Microstructure and strength of nickel at large strains. Acta Mater. 48, 2985 (2000)

21.

Tsuji, N.: In: Zhu, Y.T., Varyukhin, V. (eds.) Nanostructured Materials by High-Pressure Severe Plastic Deformation, p. 227. Springer, Netherlands (2006)

22.

Furukawa, M., Horita, Z., Nemoto, M., Valiev, R.Z., Langdon, T.G.: Factors Influencing the flow and hardness of materials with ultrafine grain sizes. Phil. Mag. A 78, 203 (1998)

23.

Valiev, R.Z., Ivanisenko, Y.V., Rauch, E.F., Baudelet, B.: Structure and deformation behaviour of Armco iron subjected to severe plastic deformation. Acta Mater. 44, 4705 (1996)

24.

Jones, R.L., Conrad, H.: The effect of grain size on the strength of alpha titanium. Trans. Met. Soc. AIME 245, 779 (1969)

25.

Charit, I., Murty, K.L.: Effect of radiation exposure on the Hall-Petch relation and its significance of radiation embrittlement in iron and ferritic steels. Trans. SMiRT 19, 1–6 (2007)

26.

Malow, T.R., Koch, C.C.: Mechanical properties, ductility, and grain size of nanocrystalline iron produced by mechanical attrition. Metall. Mater. Trans. A 29, 2285 (1998)

27.

Sergueeva, A.V., Stolyarov, V.V., Valiev, R.Z., Mukherjee, A.K.: Superplastic behavior of ultrafine-grained Ti-6Al-4V alloys. Mater. Sci. Eng., A 323, 318 (2002)

28.

Semenova, I.P., Salimgareeva, G., Da Costa, G., Lefebvre, W., Valiev, R.Z.: Enhanced strength and ductility of ultrafine-grained Ti processed by severe plastic deformation. Adv. Eng. Mater. 12, 803 (2010)

29.

Ivanisenko, Y., Sergueeva, A.V., Minkow, A., Valiev, R.Z., Fecht, H.J. In: Zehetbauer, M.J., Valiev, R.Z. (eds.) Nanomaterials by Severe Plastic Deformation, p. 453. Wiley-VCH, Weinheim (2004)

30.

Chukin, M.V., Koptseva, N.V., Valiev, R.Z., Yakovleva, I.L., Zrnik, J., Covarik, T.: The diffraction submicroscopic analysis of the submicrocrystal and nanocrystal structure of constructional carbon steels after equal channel angle pressing and further deformation. Vestnik MGTU 1, 31 (2008)

31.

Sabirov, I., Murashkin, MYu., Valiev, R.Z.: Nanostructured aluminium alloys produced by severe plastic deformation: new horizons in development. Mater. Sci. Eng. A. 560, 1–24 (2013)

32.

Li, J.S.M.: In: Li, J.S.M. (ed.) Mechanical Properties of Nanocrystalline Materials, p. 193. Pan Stanford Publ, Singapore (2011)

33.

Firstov, S.A., Rogul, T.G., Marushko, V.T., Sagaydak, V.A.: Structure and microhardness of polycrystalline chromium produced by magnetron sputtering. Issues Mater. Sci. 33, 201 (2003)

34.

Firstov, S.A., Rogul, T.G., Shut, O.A.: Transition from microstructures to nanostructures and ultimate hardening. Funct. Mater. 16, 4 (2009)

35.

Valiev, R.Z., Kozlov, E.V., Ivanov, YuF, Lian, J., Nazarov, A.A., Baudelet, B.: Deformation behaviour of ultra-fine-grained copper. Acta Metall. Mater. 42, 2467 (1994)

36.

Liddicoat, P.V., Liao, X.Z., Zhao, Y., Zhu, Y.T., Murashkin, M.Y., Lavernia, E.J., Valiev, R.Z., Ringer, S.P.: Nanostructural hierarchy increases the strength of aluminium alloys. Nature Comm. 1, 63 (2010)

37.

Valiev, R.Z., Murashkin, M.Y., Bobruk, E.V., Raab, G.I.: Grain refinement and mechanical behavior of the Al alloy subjected to the new SPD technique. Mater. Trans. 50, 87 (2009)

38.

Abramova, M.M., Enikeev, N.A., Valiev, R.Z., Etienne, A., Radiguet, B., Ivanisenko, Y., Sauvage, X.: Grain boundary segregation induced strengthening of an ultrafine-grained austenitic stainless steel. Mater. Lett. 136, 349–352 (2014)

39.

Scheriau, S., Zhang, Z., Kleber, S., Pippan, R.: Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion. Mater. Sci. Eng., A 528, 2776–2786 (2011)

40.

Krawczynska, A.T., Lewandowska, M., Pippan, R., Kurzydlowski, K.J.: The effect of high pressure torsion on structural refinement and mechanical properties of an austenitic stainless steel. J. Nanosci. Nanotech. 13, 1–4 (2013)

41.

Wang, H., Shuro, I., Umemoto, M., Kuo, H.H., Todaka, Y.: Annealing behavior of nano-crystalline austenitic SUS316L produced by HPT. Mater. Sci. Eng., A 556, 906–910 (2012)

42.

Valiev, R.Z., Zhilyaev, A.P., Langdon, T.G.: Bulk Nanostructured Materials: Fundamentals and Applications, 456 p. Wiley-TMS, New York (2013)

43.

Raabe, D., Herbig, M., Sandlöbes, S., Li, Y., Tytko, D., Kuzmina, M., Ponge, D., Choi, P.P.: Grain boundary segregation engineering in metallic alloys: a pathway to the design of interfaces. Curr. Opin. Solid State Mater. Sci. 18, 253–261 (2014)

44.

Raabe, D., Choi, P.P., Li, Y., Kostka, A., Sauvage, X., Lecouturier, F., Hono, K., Kirchheim, R., Pippan, R., Embury, D.: Metallic composites processed via extreme deformation: toward the limits of strength in bulk materials. MRS Bull. 35, 982 (2010)

45.

Morris, D.G. (ed.): Mechanical Behaviour of Nanostructured Materials. Trans. Tech. Publications, Uetikon-Zurich (1998)

46.

Koch, C.C.: Optimization of strength and ductility in nanocrystalline and ultrafine grained metals. Scripta Mater. 49, 657 (2003)

47.

Horita, Z., Fujinami, T., Nemoto, M., Langdon, T.G.: Equal-channel angular pressing of commercial aluminum alloys: grain refinement, thermal stability and tensile properties. Metall. Mater. Trans. 31A, 691 (2000)

48.

Zhu, Y.T., Langdon, T.G.: The fundamentals of nanostructured materials processed by severe plastic deformation. JOM 56(10), 58 (2004)

49.

Zhao, Y., Zhu, Y.T., Lavernia, E.J.: Strategies for improving tensile ductility of bulk nanostructured materials. Adv. Eng. Mater. 12, 76 (2010)

50.

Ma, E.: Eight routes to improve the tensile ductility of bulk nanostructured metals and alloys. JOM 58(4), 49 (2006)

51.

Dieter, G.E.: Mechanical Metallurgy. McGraw-Hill, Boston (1986)

52.

Hart, E.W.: Theory of the tensile test. Acta Metal. Mater. 15, 351 (1967)

53.

Valiev, R.Z.: Nanostructuring of metals by severe plastic deformation for advanced properties. Nat. Mater. 3, 511–516 (2004)

54.

Valiev, R.Z., Alexandrov, I.V., Lowe, T.C., Zhu, Y.T.: Paradox of strength and ductility in metals processed by severe plastic deformation. J. Mater. Res. 17, 5 (2002)

55.

Horita, Z., Ohashi, K., Fujita, T., Kaneko, K., Langdon, T.G.: Achieving high strength and high ductility in precipitation-hardened alloys. Adv. Mater. 17, 1599 (2005)

56.

Wang, Y., Chen, M., Zhou, F., Ma, E.: High tensile ductility in a nanostructured metal. Nature 419, 912 (2002)

57.

Valiev, R.Z., Sergueeva, A.V., Mukherjee, A.K.: The effect of annealing on tensile deformation behavior of nanostructured SPD titanium. Scripta Mater. 49, 669 (2003)

58.

Parker, E.R.: Materials Data Book for Engineers and Scientists. McGraw-Hill, New York (1967)

59.

Brandes, E.A., Brook, G.B. In: Smithells Metals Reference Book, 7th edn, Chap. 22. Butterworth–Heinemann, Oxford (1992)

60.

Hoeppel, H.W., May, J., Eisenlohr, P., Goeken, M.: Strain-rate sensitivity of ultrafine-grained materials. Z. Metallkd. 96, 566 (2005)

61.

May, J., Hoeppel, H.W., Goeken, M.: Strain rate sensitivity of ultrafine-grained aluminium processed by severe plastic deformation. Scripta Mater. 53, 189 (2005)

62.

Dalla Torre, F., Lapovok, R., Sandlin, J., Thomson, P.F., Davies, C.H.J., Pereloma, E.V.: Microstructures and properties of copper processed by equal channel angular extrusion for 1–16 passes. Acta Mater. 52, 4819 (2004)

63.

Zhang, X., Wang, H., Scattergood, R.O., Narayan, J., Koch, C.C., Sergueeva, A.V., Mukherjee, A.K.: Studies of deformation mechanisms in ultra-fine-grained and nanostructured Zn. Acta Mater. 50, 4823 (2002)

64.

Mughrabi, H., Hoeppel, H.W., Kautz, M., Valiev, R.Z.: Annealing treatments to enhance thermal and mechanical stability of ultrafine-grained metals produced by severe plastic deformation. Z. Metallkd. 94, 1079 (2003)

65.

Park, Y.S., Chung, K.H., Kim, N.J., Lavernia, E.J.: Microstructural investigation of nanocrystalline bulk Al–Mg alloy fabricated by cryomilling and extrusion. Mater. Sci. Eng., A 374, 211 (2004)

66.

Zhao, Y.H., Zhu, Y., Lavernia, E.J.: Strategies for improving tensile ductility of bulk nanostructured materials. Adv. Eng. Mater. 12, 769–778 (2010)

67.

Ebrahimi, F., Bourne, G.R., Kelly, M.S., Matthews, T.E.: Mechanical properties of nanocrystalline nickel produced by electrodeposition. Scripta Mater. 11, 343 (1999)

68.

Zhao, Y.H., Liao, X.Z., Cheng, S., Ma, E., Zhu, Y.T.: Simultaneously increasing the ductility and strength of nanostructured alloys. Adv. Mater. 18, 2280 (2006)

69.

Cheng, S., Zhao, Y.H., Zhu, Y.T., Ma, E.: Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation. Acta Mater. 55, 5822 (2007)

70.

Lu, L., Shen, Y.F., Chen, X.H., Qian, L.H., Lu, K.: Ultrahigh strength and high electrical conductivity in copper. Science 304, 422 (2004)

71.

Zhao, Y.H., Bingert, J.F., Liao, X.Z., Cui, B.Z., Han, K., Sergueeva, A.V., Mukherjee, A.K., Valiev, R.Z., Langdon, T.G., Zhu, Y.T.: Simultaneously increasing the ductility and strength of ultra-fine-grained pure copper. Adv. Mater. 18, 2949 (2006)

72.

Tao, N., Lu, K.: Dynamic plastic deformation (DPD): a novel technique for synthesizing bulk nanostructured metals. J. Mater. Sci. Tech. 23(6), 771 (2007)

73.

Ungar, T., Balogh, L., Zhao, Y.H., Zhu, Y.T., Horita, Z., Xu, C., Langdon, T.G.: Acta Mater. 56, 809 (2008)

74.

Son, Y.I., Lee, Y.K., Park, K.T., Lee, C.S., Shin, D.H.: Ultrafine grained ferrite-martensite dual phase steels fabricated via equal channel angular pressing: microstructure and tensile properties. Acta Mater. 53, 3125 (2005)

75.

Wang, Y., Ma, E., Valiev, R.Z., Zhu, Y.: Tough nanostructured metals at cryogenic temperatures. Adv. Mater. 16, 328 (2004)

76.

Li, Y.I., Zeng, X.H., Blum, W.: Transition from strengthening to softening by grain boundaries in ultrafine-grained Cu. Acta Mater. 52, 5009 (2004)

77.

Valiev, R.Z., Murashkin, MYu., Kilmametov, A.R., Straumal, B.B., Chinh, N.Q., Langdon, T.G.: Unusual super-ductility at room temperature in an ultrafine-grained aluminum alloy. J. Mater. Sci. 45, 4718 (2010)

78.

Moreno-Valle, E.C., Monclus, M.A., Molina-Aldareguia, J.M., Enikeev, N., Sabirov, I.: Biaxial deformation behavior and enhanced formability of ultrafine-grained pure copper. Metall. Mater. Trans. A 44, 2013–2399 (2013)

79.

Suresh, S.: Fatigue of Materials, p. 679. Cambridge University Press, Cambridge (1998)

80.

Hoeppel, H.W., Goeken, M.: Fatigue behavior in nanostructured metals. In: Whang, S.H. (ed.) Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications, p. 507. Woodhead Publishing Limited (2011)

81.

Estrin, Y., Vinogradov, A.: Fatigue behavior of light alloys with ultra-fine grain structure produced by severe plastic deformation: an overview. Int. J. Fatigue 32, 898–907 (2010)

82.

Hoeppel, H.W., Kautz, M., Xu, C., Murashkin, M., Langdon, T.G., Valiev, R.Z., Mughrabi, H.: An overview: fatigue behavior of ultra-fine grained metals and alloys. Int. J. Fatigue 28, 1001–1010 (2006)

83.

Mughrabi, H., Hoeppel, H.W., Kautz, M.: Fatigue and microstructure of ultra-fine grained metals produced by severe plastic deformation. Scripta Mater. 51, 807–812 (2004)

84.

Murashkin, M., Sabirov, I., Prosvirnin, D., Ovid'ko, I., Terentiev, V., Valiev, R., Dobatkin, S.: Fatigue behavior of an ultra-fine grained Al-Mg-Si alloy processed by high-pressure torsion. Metals 5, 578 (2015)

85.

De, P.S., Mishra, R.S., Smith, C.B.: Effect of microstructure on fatigue life and fracture morphology in an aluminum alloy. Scripta Mater. 60, 500–503 (2009)

86.

Vinogradov, A., Hashimoto, S., Kopylov, V.I.: Enhanced strength and fatigue life of ultra-fine grain Fe-36Ni Invar alloy. Mater. Sci. Eng., A 355, 277 (2003)

87.

Vinogradov, A., Hashimoto, S.: Multiscale phenomena in fatigue of ultra-fine grain materials—an overview. Mater. Trans. 42, 74–84 (2001)

88.

Gale, F.W., Totemeier, T.C. (eds.) Smithells Reference Book. Elsevier, Amsterdam (2004)

89.

Patlan, V., Vinogradov, A., Higashi, K., Kitagawa, K.: Overview of fatigue properties of fine grain 5056 Al-Mg alloy processed by equal-channel angular pressing. Mater. Sci. Eng., A 300, 171 (2001)

90.

Cavaliere, P., Cabibbo, M.: Effect of Sc and Zr additions on the microstructure and fatigue properties of AA6106 produced by equal-channel-angular-pressing. Mater. Charact. 59, 197 (2008)

91.

Stolyarov, V.V., Latysh, V.V., Valiev, R.Z., Zhu, Y.T. In Lowe, T.C., Valiev, R.Z. (eds.) Investigations and Applications of Severe Plastic Deformation, p. 367. Kluwer Publishers, Dordrecht (2000)

92.

Vinogradov, AYu., Stolyarov, V.V., Hashimoto, S., Valiev, R.Z.: Cyclic behavior of ultrafine-grain titanium produced by severe plastic deformation. Mater. Sci. Eng., A 318, 163–173 (2001)

93.

Kim, W.J., Hyun, C.Y., Kim, H.K.: Fatigue strength of ultrafine-grained pure Ti after severe plastic deformation. Scripta Mater. 54, 1745–1750 (2006)

94.

Vinogradov, A., Hashimoto, S.: Fatigue of severely deformed metals. Adv. Eng. Mater. 5, 351 (2003)

95.

Saitova, L.R., Höppel, H.W., Göken, M., Semenova, I.P., Valiev, R.Z.: Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use. Int. J. Fatigue 31, 322–331 (2009)

96.

Chapetti, M.D., Miyata, H., Tagawa, T., Miyata, T., Fujioka, M.: Fatigue strength of ultra-fine grained steels. Mater. Sci. Eng., A 381, 331–336 (2004)

97.

Vinogradov, A., Washikita, A., Kitagawa, K., Kopylov, V.I.: Fatigue life of fine-grain Al–Mg–Sc alloys produced by equal-channel angular pressing. Mater. Sci. Eng., A 349, 318–326 (2003)

98.

Chung, C.S., Kim, J.K., Kim, H.K., Kim, W.J.: Improvement of high-cycle fatigue life in a 6061 Al alloy produced by equal channel angular pressing. Mater. Sci. Eng., A 337, 39–44 (2002)

99.

May, J., Dinkel, M., Amberger, D., Hoeppel, H.W., Goeken, M.: Mechanical properties, dislocation density and grain structure of ultrafine—grained aluminum and aluminum—magnesium alloys. Metall. Mater. Trans. A 38, 1941–1945 (2007)

100.

Avtokratova, E.V., Kaibyshev, R.O., Sitdikov, OSh: Fatigue of a fine-grained high-strength Al-6Mg-Sc alloy produced by equal-channel angular pressing. Phys. Met. Metall. 105, 532 (2008)

101.

Semenova, I.P., Salimgareeva, G.K., Latysh, V.V., Lowe, T.C., Valiev, R.Z.: Enhanced fatigue strength of commercially pure Ti processed by severe plastic deformation. Mater. Sci. Eng., A 503, 92–95 (2009)

102.

Lukas, P., Kunz, L., Svoboda, M. In: Proceedings of 9th International Fatigue Conference, 2006, FT62

103.

Hoeppel, H.W., May, J., Prell, M., Goeken, M.: Influence of grain size and precipitation state on the fatigue lives and deformation mechanisms of CP aluminium and AA6082 in the VHCF-regime. Int. J. Fatigue 33, 10–18 (2011)

104.

Malekjani, S., Hodgson, P.D., Cizek, P., Hilditch, T.B.: Cyclic deformation response of ultrafine pure Al. Acta Mater. 59, 5358–5367 (2011)

105.

Canadinc, D., Maier, H.J., Gabor, P., May, J.: On the cyclic deformation response of ultrafine-grained Al–Mg alloys at elevated temperatures. Mater. Sci. Eng., A 496, 114–120 (2008)

106.

Mughrabi, H., Hoeppel, H.W.: Cyclic deformation and fatigue properties of ultrafine grain size materials: current status and some criteria for improvement of the fatigue resistance. Mater. Res. Soc. Symp. Proc. B2.1.1, 634 (2001)

107.

Malekjani, S., Hodgson, P.D., Cizek, P., Sabirov, I., Hilditch, T.B.: Cyclic deformation response of UFG 2024 Al alloy. Int. J. Fatigue 33, 700–709 (2011)

108.

Huebner, P., Kiessling, R., Biermann, H., Vinogradov, A.: Fracture behaviour of ultrafine-grained materials under static and cyclic loading. Int. J. Mater. Res. 97, 1566–1570 (2006)

109.

Huebner, P., Kiessling, R., Biermann, H., Hinkel, T., Jungnickel, W., Kawalla, R., Hoeppel, H.W., May, J.: Static and cyclic crack growth behavior of ultrafine-grained Al produced by different severe plastic deformation methods. Metall. Mater. Trans. A 38, 1926–1933 (2007)

110.

Vinogradov, A., Nagasaki, S., Patlan, V., Kitagawa, K., Kawazoe, N.: Fatigue properties of 5056 Al-Mg alloy produced by equal-channel angular pressing. Nanostr. Mater. 11, 925–934 (1999)

111.

Wu, L., Stoica, G.M., Liao, H.H., Agnew, S.R., Payzant, E.A., Wang, G., Fielden, D.E., Chen, L., Liaw, P.K.: Fatigue-property enhancement of magnesium alloy AZ31B through ECAP. Metall. Mater. Trans. A 38, 2283–2289 (2007)

112.

Hanlon, T., Tabachnikova, E.D., Suresh, S.: Fatigue behavior of nanocrystalline metals and alloys. Int. J. Fatigue 27, 1147–1158 (2005)

113.

Kim, H., Lee, Y., Chung, C.: Fatigue properties of a fine-grained magnesium alloy produced by equal channel angular pressing. Scripta Mater. 52, 473–477 (2005)

114.

Lapovok, R., Loader, C., Dalla Torre, F.H., Semiatin, S.L.: Microstructure evolution and fatigue behavior of 2124 aluminum processed by ECAE with back pressure. Mater. Sci. Eng., A 425, 36–46 (2006)

115.

Malekjani, S., Hodgson, P.D., Stanford, N.E., Hilditch, T.B.: The role of shear banding on the fatigue ductility of ultrafine-grained aluminium. Scripta Mater. 68, 269–272 (2013)

116.

Malekjani, S., Hodgson, P.D., Stanford, N.E., Hilditch, T.B.: Shear bands evolution in ultrafine-grained aluminium under cyclic loading. Scripta Mater. 68, 821–824 (2013)

117.

Zum Gahr, K.H.: Microstructure and Wear of Materials. Elsevier, Amsterdam (1987)

118.

Diomidis, N., Mischler, S., More, N.S., Roy, M.: Tribo-electrochemical characterization of metallic biomaterials for total joint replacement. Acta Biomater. 8, 852–859 (2012)

119.

Wang, C.T., Gao, N., Wood, R.J.K., Langdon, T.G.: Wear behavior of an aluminum alloy processed by equal-channel angular pressing. J. Mater. Sci. 46, 123–130 (2011)

120.

Jafari, M., Enayati, M.H., Abbasi, M.H., Karimzadeh, F.: Compressive and wear behavior of bulk nanostructured Al2024 alloy. Mater. Design. 31, 663–669 (2010)

121.

Ortiz-Cuellar, E., Hernandez-Rodriguez, M.A.L., García-Sanchez, E.: Evaluation of the tribological properties of an Al–Mg–Si alloy processed by severe plastic deformation. Wear 271, 1828–1832 (2011)

122.

Purcek, G., Saray, O., Kucukomeroglu, T., Haouaoui, M., Karaman, I.: Effect of equal-channel angular extrusion on the mechanical and tribological properties of as-cast Zn–40Al–2Cu–2Si alloy. Mater. Sci. Eng., A 527, 3480 (2010)

123.

Purcek, G., Karaman, I., Yapici, G.G., Al-Maharbi, M., Kuçukomeroglu, T., Saray, O.: Enhancement in mechanical behavior and wear resistance of severe plastically deformed two-phase Zn–Al alloys. Int. J. Mater. Res. 98, 332–338 (2007)

124.

Edalati, K., Ashida, M., Horita, Z., Matsui, T., Kato, H.: Wear resistance and tribological features of pure aluminum and Al–Al₂O₃ composites consolidated by high-pressure torsion. Wear 310, 83–89 (2014)

125.

Purcek, G., Saray, O., Kul, O., Karaman, I., Yapici, G.G., Haouaoui, M., Maier, H.J.: Mechanical and wear properties of ultrafine-grained pure Ti produced by multi-pass equal-channel angular extrusion. Mater. Sci. Eng., A 517, 97 (2009)

126.

Ming, Q., Yong-zhen, Z., Jian-heng, Y., Jun, Z.: Microstructure and tribological characteristics of Ti–6Al–4V alloy against GCr15 under high speed and dry sliding. Mater. Sci. Eng., A 434, 71–75 (2006)

127.

Sato, H., Elhadad, S., Sitdikov, O., Watanabe, Y.: Effects of processing routes on wear property of Al-Al3Ti alloys severely deformed by ECAP. Mater. Sci. Forum 971, 584–586 (2008)

128.

Kim, Y.S., Ha, J.S., Kim, W.J.: Characteristics of severely deformed 6061 Al and AZ61 Mg alloys. Mater. Sci. Forum 597, 449–452 (2004)

129.

Kucukomeroglu, T.: Effect of equal-channel angular extrusion on mechanical and wear properties of eutectic Al–12Si alloy. Mater. Design. 31, 782 (2010)

130.

Kim, Y.S., Yu, H.S., Shin, D.H.: Low sliding-wear resistance of ultrafine-grained Al alloys and steel having undergone severe plastic deformation. Int. J. Mater. Res. 100, 871 (2009)

131.

Kazemi Talachi, A., Eizadjou, M., Danesh Manesh, H., Janghorban, K.: Wear characteristics of severely deformed aluminum sheets by accumulative roll bonding (ARB) process. Mater. Charact. 62, 12–21 (2011)

132.

Abd El Aal, M.I., El Mahallawy, N., Shehata, F.A., Abd El Hameed, M., Yoon, E.Y., Kim, H.S.: Wear properties of ECAP-processed ultrafine grained Al–Cu alloys. Mater. Sci. Eng., A 527, 3726–3732 (2010)

133.

Gao, L.L., Cheng, X.H.: Effect of ECAE on microstructure and tribological properties of Cu-10 %Al-4 %Fe Alloy. Tribol. Lett. 27, 221 (2007)

134.

Gao, L.L., Cheng, X.H.: Microstructure and dry sliding wear behavior of Cu–10 %Al–4 %Fe alloy produced by equal channel angular extrusion. Wear 265, 986 (2008)

135.

Gao, L.L., Cheng, X.H.: Microstructure, phase transformation and wear behavior of Cu–10 %Al–4 %Fe alloy processed by ECAE. Mater. Sci. Eng., A 473, 259 (2008)

136.

Wang, Z.B., Tao, N.R., Li, S., Wang, W., Liu, G., Lu, J., Lu, K.: Effect of surface nanocrystallization on friction and wear properties in low carbon steel. Mater. Sci. Eng., A 352, 144 (2003)

137.

Stolyarov, V.V., Shuster, L.S., Migranov, M.S., Valiev, R.Z., Zhu, Y.T.: Reduction of friction coefficient of ultrafine-grained CP titanium. Mater. Sci. Eng., A 371, 313 (2004)

138.

La, P., Ma, J., Zhu, Y.T., Yang, J., Liu, W., Xue, Q., Valiev, R.Z.: Dry-sliding tribological properties of ultrafine-grained Ti prepared by severe plastic deformation. Acta Mater. 53, 5167 (2005)

139.

Garbacz, H., Gradzka-Dahlke, M., Kurzydlowski, K.J.: The tribological properties of nano-titanium obtained by hydrostatic extrusion. Wear 263, 572 (2007)

140.

Wang, C.T., Gao, N., Gee, M.G., Wood, R.J.K., Langdon, T.G.: Effect of grain size on the micro-tribological behavior of pure titanium processed by high-pressure torsion. Wear 280–281, 28–35 (2012)

141.

Wang, C.T., Gao, N., Gee, M.G., Wood, R.J.K., Langdon, T.G.: Processing of an ultrafine-grained titanium by high-pressure torsion: an evaluation of the wear properties with and without a TiN coating. J. Mech. Behav. Biomed. Mater. 17, 166–175 (2013)

142.

Cheng, X., Li, Z., Xiang, G.: Dry sliding wear behavior of TiNi alloy processed by equal channel angular extrusion. Mater. Design 28, 2218 (2007)

143.

Rossiter, P.L.: The Electrical Resisitivity of Metals and Alloys. Cambridge University Press, Cambridge (1987)

144.

Dugdale, J.S.: The Electrical Properties of Metals and Alloys. Arnold, London (1977)

145.

Handbook Committee. In: ASM Handbook. Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, vol. 2. ASM International (1990)

146.

Higuera-Cobos, O.F., Cabrera, J.M.: Mechanical, microstructural and electrical evolution of commercially pure copper processed by equal channel angular extrusion. Mater. Sci. Eng., A 571, 103–114 (2013)

147.

Zhang, Y., Li, Y.S., Tao, N.R., Lu, K.: High strength and high electrical conductivity in bulk nanograined Cu embedded with nanoscale twins. Appl. Phys. Lett. 91, 211901 (2007)

148.

Cheng, S., Ma, E., Wang, Y.M., Keckes, L.J., Youssef, K.M., Koch, C.C., Trociewitz, U.P., Han, K.: Tensile properties of in-situ consolidated nanocrystalline Cu. Acta Mater. 53, 1521 (2005)

149.

Takata, N., Lee, S.H., Tsuji, N.: Ultrafine grained copper alloy sheets having both high strength and high electric conductivity. Mater. Lett. 63, 1757–1760 (2009)

150.

Need, R.F., Alexander, D.J., Field, R.D., Livescu, V., Papin, P., Swenson, C.A., Mutnick, D.B.: The effects of equal channel angular extrusion on the mechanical and electrical properties of alumina dispersion-strengthened copper alloys. Mater. Sci. Eng., A 565, 450–458 (2013)

151.

Vinogradov, A., Suzuki, Y., Ishida, T., Kitagawa, K., Kopylov, V.I.: Effect of chemical composition on structure and properties of ultrafine grained Cu–Cr–Zr alloys produced by equal-channel angular pressing. Mater. Trans. 45, 2187–2191 (2004)

152.

Botcharova, E., Freudenberger, J., Schultz, L.: Mechanical and electrical properties of mechanically alloyed nanocrystalline CuNb alloys. Acta Mater. 54, 3333–3341 (2006)

153.

Islamgaliev, R.K., Nesterov, K.M., Bourgon, J., Champion, Y., Valiev, R.Z.: Nanostructured Cu–Cr alloy with high strength and electrical conductivity. J. Appl. Phys. 115, 194301 (2014)

154.

Murashkin, MYu., Sabirov, I., Kazykhanov, V.U., Bobruk, E.V., Dubravina, A.A., Valiev, R.Z.: Enhanced mechanical properties and electrical conductivity in ultrafine-grained Al alloy processed via ECAP-PC. J. Mater. Sci. 48, 4501 (2013)

155.

Bobruk, E.V., Murashkin, MYu., Kazykhanov, V.U., Valiev, R.Z.: Aging behavior and properties of ultrafine-grained aluminum alloys of Al–Mg–Si system. Rev. Adv. Mater. Sci. 31, 14–34 (2012)

156.

Valiev, R.Z., Murashkin, MYu., Sabirov, I.: A nanostructural design to produce high strength Al alloys with enhanced electrical conductivity. Scripta Mater. 76, 13–16 (2014)

157.

Cahn, R.W., Haasen, P., Kramer, E.J. In: Materials Science and Technology, vol 8/9, p. 282. Wiley-VCH, New York (2005)

158.

Kasap, S., Capper, P. (eds.): Springer Handbook of Electronic and Photonic Materials. Springer, Würzburg (2006)

159.

Chen, X.H., Lu, L., Lu, K.: Electrical resistivity of ultrafine-grained copper with nanoscale growth twins. J. Appl. Phys. 102, 083708 (2007)

160.

Sauvage, X., Wilde, G., Divinski, S.V., Horita, Z., Valiev, R.Z.: Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena. Mater. Sci. Eng., A 540, 1–12 (2012)

161.

Gubicza, J., Schiller, I., Chinh, N.Q., Illy, J., Horita, Z., Langdon, T.G.: The effect of severe plastic deformation on precipitation in supersaturated Al–Zn–Mg alloys. Mater. Sci. Eng., A 460–461, 77–85 (2007)

162.

Sha, G., Wang, Y.B., Liao, X.Z., Duan, Z.C., Ringer, S.P., Langdon, T.G.: Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy. Acta Mater. 57, 3123–3132 (2009)

163.

Garcia-Infanta, J.M., Swaminathan, S., Cepeda-Jimenez, C.M., McNelley, T.R., Ruano, O.A., Carreno, F.: Enhanced grain refinement due to deformation-induced precipitation during ambient-temperature severe plastic deformation of an Al–7 % Si alloy. J. Alloys Compd. 478, 139–143 (2009)

164.

Roven, H.J., Liu, M., Werenskiold, J.C.: Dynamic precipitation during severe plastic deformation of an Al-Mg–Si aluminium alloy. Mater. Sci. Eng., A 483–484, 54–58 (2008)

165.

Murayama, M., Hono, K., Saga, M., Kikuchi, M.: Atom probe studies on the early stages of precipitation in Al–Mg–Si alloys. Mater. Sci. Eng., A 250, 127 (1998)

166.

Genevois, C., Fabregue, D., Deschamps, A., Poole, W.J.: On the coupling between precipitation and plastic deformation in relation with friction stir welding of AA2024 T3 aluminium alloy. Mater. Sci. Eng., A 441, 39 (2006)

167.

Sauvage, X., Murashkin, MYu., Valiev, R.Z.: Atomic scale investigation of dynamic precipitation and grain boundary segregation in a 6061 aluminium alloy nanostructured by ECAP. Kovove Mater. 49(1), 11–15 (2011)

168.

Kiessling, F., Nefzger, P., Nolasco, J.F., Kaintzyk, U.: Overhead Power Lines: Planning, Design, Construction. Springer, Berlin (2003)

169.

Nishizaki, T., Lee, S., Horita, Z., Sasaki, T., Kobayashi, N.: Superconducting properties in bulk nanostructured niobium prepared by high-pressure torsion. Physica C 493, 132–135 (2013)

170.

Beloshenko, V.A., Chishko, V.V.: Deformation-heat treatment of Nb-Ti superconductors using severe plastic deformation methods. Phys. Met. Metall. 114, 992–1002 (2013)

171.

Edalati, K., Diao, T., Lee, S., Horita, Z., Nishizaki, T., Akune, T., Nojima, T., Sasaki, T.: High strength and superconductivity in nanostructured niobium-titanium alloy by high-pressure torsion and annealing: Significance of elemental decomposition and supersaturation. Acta Mater. 80, 149–158 (2014)

172.

Herzer, G. In: Buschow, K.H.J. (ed.) Handbook of Magnetic Materials, vol. 10, p. 415. Elsevier Science B.V. (1997)

173.

Mulyukov, K.Y., Khaphisov, S.B., Valiev, R.Z.: Grain boundaries and saturation magnetization in submicron grained nickel. Phys. Stat. Sol. (a) 133, 447 (1992)

174.

Valiev, R.Z., Korznikova, G.F., Mulyukov, K.Y., Mishra, R.S., Mukherjee, A.K.: Saturation magnetization and curie temperature of nanocristalline nickel. Phil. Mag. B 75, 803 (1997)

175.

Mulyukov, K.Y., Korznikova, G.F., Abdulov, R.Z., Valiev, R.Z.: Microstructure and magnetic properties of submicron grained cobalt after large plastic deformation and their variation during annealing. Phys. Stat. Sol. 125, 609 (1991)

176.

Scheriau, S., Kriegisch, M., Kleber, S., Mehboob, N., Grossinger, R., Pippan, R.: Magnetic chatacteristics of HPT deformed soft-magnetic materials. J. Magn. Magn. Mater. 322, 2984–2988 (2010)

177.

Mulyukov, K.Y., Korznikova, G.F., Sagdatkireyeva, M.B., Timofeyev, V.N., Valiev, R.Z.: The study of domain structure of submicron grained cobalt and its changes during heating. J. Magn. Magn. Mater. 110, 73 (1992)

178.

Marin, P., Vazquez, M., Hernando, A.: Magnetic hardening during the amorphous to nanocrystalline transformation in FeSiBCuNb alloys: theoretical considerations. J. Magn. Magn. Mater. 196–197, 221–223 (1999)

179.

Chbihi, A., Sauvage, X., Genevois, C., Blavette, D., Gunderov, D., Popov, A.G.: Optimization of the magnetic properties of FePd alloys by severe plastic deformation. Adv. Eng. Mater. 12, 708–713 (2010)

180.

Stolyarov, V.V., Gunderov, D.V., Valiev, R.Z., Popov, A.G., Gaviko, V.S., Ermolenko, A.S.: Metastable states in R2Fe14B-based alloys processed by severe plastic deformation. J. Magn. Magn. Mater. 196–197, 166–168 (1999)

181.

Stolyarov, V.V., Gunderov, D.V., Popov, A.G., Puzanova, T.Z., Raab, G.I., Yavari, A.R., Valiev, R.Z.: High coercive states in Pr-Fe-B-Cu alloy processed by equal channel angular pressing. J. Magn. Magn. Mater. 242–245, 1399–1401 (2002)

182.

Stolyarov, V.V., Gunderov, D.V., Popov, A.G., Gavilko, V.S., Ermolenko, A.S.: Structure evolution and changes in magnetic properties of severe plastic deformed Nd(Pr)-Fe-B alloys during annealing. J. Alloys Compds. 281, 69–71 (1998)

183.

Popov, A.G., Gunderov, D.V., Stolyarov, V.V.: Severe plastic deformation—a new method of formation of a high coercivity state in PrFeB-alloy. J. Magn. Magn. Mater. 33, 157–158 (1996)

184.

Stolyarov, V.V., Popov, A.G., Gunderov, D.V., Gaviko, V.S., Korznikova, G.F., Ermolenko, A.S., Valiev, R.Z.: Effect of severe plastic deformation on the structure and magnetic properties of Pr–Fe–B–Cu alloys. Phys. Met. Metall. 83(2), 173 (1997)

185.

Korznikova, G.F., Korznikov, A.V.: Gradient submicrocrystalline structure in Fe–Cr–Co system hard magnetic alloys. Mater. Sci. Eng., A 503, 99–102 (2009)

186.

Straumal, B.B., Protasova, S.G., Mazilkin, A.A., Kogtenkova, O.A., Kurmanaeva, L., Baretzky, B., Schutz, G., Korneva, A., Zieba, P.: SPD induced changes in the Cu–Co alloys. Mater. Lett. 98, 217–221 (2013)

187.

Suehiro, K., Nishimura, S., Horita, Z.: Change in magnetic property of Cu-6.5Co alloy through processing by ECAP. Mater. Trans. 49, 102–106 (2008)

188.

Sagawa, M., Fujimura, S., Yamamoto, H., Matsuura, Y., Hiraga, K.: IEEE Trans. Magn. 20(5), 1584 (1984)

189.

Shimoda, T., Akioka, K., Kobayashi, O., Yamagami, T., Ohki, T., Miayagawa, M., Yuri, T.: Hot working behavior of cast Pr–Fe-B magnets. IEEE Trans. Magn. 25(5), 4099 (1989)

190.

Menéndez, E., Sort, J., Langlais, V., Zhilyaev, A., Muñoz, J.S., Suriñach, S., Nogués, J., Baró, M.D.: Cold compaction of metal–ceramic (ferromagnetic–antiferromagnetic) composites using high pressure torsion. J. Alloys Compds. 434–435, 505–508 (2007)

191.

Kisker, H., Gessmann, T., Wurschum, R., Kronmuller, H., Schaefer, H.E.: Magnetic properties of high purity nanocrystalline nickel. Nanostr. Mater. 6, 925–928 (1995)

192.

Rubel, M.: Reactor aspects of fusion: issues related to materials, radioactivity and radiation induced defects. Trans. Fusion Sci. Tech. 49, 465–473 (2006)

193.

Garner, F.A. In: Comprehensive Nuclear Materials. Radiation Damage in Austenitic Steels, vol. 4, p. 33. Elsevier, Amsterdam (2012)

194.

Thomson, M.W.: Defects and Radiation Damage in Metals. Cambridge University Press, New York (1969)

195.

Parshin, A.M.: Structure, Strength and Radiation Damage of Corrosion-Resistant Steels and Alloys, p. 361. Amer. Nucl. Soc., La Grange Park (1996)

196.

Abramivich, M.D., Votinov, S.N., Yoltukhvsky, A.G.: Radiation Materials Science in Atomic Power Stations. Energoatomizdat, Moscow (1984)

197.

Alamo, A., Seran, J.L., Rabouille, O., Brachet, J.C., Mailard, A., Touron, H., Royer, J. In: Gelles, D.S., Nanstag, R.K., Kumar, A.S., Little, E.A. (eds.) Effects of Radiation on Materials: 17th International Symposium, ASTM STP 1270. American Society for Testing and Materials (1996)

198.

Borodin, O.V., Bruk, V.V., Voevodin, V.N., Neklyudov, I.M., Shamardin, V.K., Neystroev, V.S. In: Gelles, D.S., Nanstag, R.K., Kumar, A.S., Little, E.A. (eds.) Effects of Radiation on Materials: 17th International Symposium, ASTM STP 1270. American Society for Testing and Materials (1996)

199.

Schaeublin, R., Leguey, T., Spaetig, P., Baluk, N., Victoria, M.: Microstructure and mechanical properties of two ODS ferritic/martensitic steels. J. Nucl. Mater. 307, 778–782 (2002)

200.

Brailsford, A.D., Bullough, R. In: Proc. Int. Conf. Phys. Met. React. Fuel Flem. Swelling of irradiated materials, p. 148. Berkeley Castle and Berkeley Nucl. Lab., London (1973)

201.

Maksimkin, O.P., Shiganakov, S.B.: On the role of grain boundaries in work hardening and high-temperature embrittlement of irradiated metallic materials, p. 35. Preprint of Inst. Nuclear Phys. Kazakhstan Academy of Science, No.1-86, Alma-Ata (1986)

202.

Chimi, Y., Iwase, A., Ishikawa, N., Kobiyama, M., Inami, T., Okuda, S.: Accumulation and recovery of defects in ion-irradiated nanocrystalline gold. J. Nucl. Mater. 297, 355 (2001)

203.

Rose, M., Balogh, A.G., Hahn, H.: Instability of irradiation induced defects in nanostructured materials. Nucl. Instr. Meth. Phys. Res. B 119, 127–128 (1997)

204.

Samaras, M., Derlet, P.M., Van Swygenhoven, H., Victoria, M.: Computer simulation of displacement cascades in nanocrystalline Ni. Phys. Rev. Lett. 88, 125505 (2002)

205.

Samaras, M., Derlet, P.M., Van Swygenhoven, H., Victoria, M.: Stacking fault tetrahedra formation in the neighbourhood of grain boundaries. Nucl. Instr. Meth. Phys. Res. B 202, 51 (2003)

206.

Samaras, M., Derlet, P.M., Van Swygenhoven, H., Victoria, M.: Radiation damage near grain boundaries. Phil. Mag. 83, 3599 (2003)

207.

Voegeli, W., Albe, K., Hahn, H.: Simulation of grain growth in nanocrystalline nickel induced by ion irradiation. Nucl. Instrum. Meth. B 202, 230 (2003)

208.

Valiev, R.Z., Islamgaliev, R.K., Alexandrov, I.V.: Bulk nanostructured materials from severe plastic deformation. Prog. Mater Sci. 45, 105 (2000)

209.

Lowe, T.C., Valiev, R.Z.: Producing nanoscale microstructures through severe plastic deformation. JOM 52, 27 (2000)

210.

Valiev, R.Z.: Nanomaterial advantage. Nature 419, 887–889 (2002)

211.

Korshunov, A.I., Vedernikova, I.I., Polyakov, L.V., Kravchenko, T.N., Smolyakov, A.A., Soloviev, V.P.: Effects of the number of ECAP passes and ECAP route on the heterogeneity in mechanical properties across the sample from titanium VT1-0. In: Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation, Fukuoka, Japan (2005)

212.

Korshunov, A.I., Vedernikova, I.I., Polyakov, L.V., Kravchenko, T.N., Smolyakov, A.A., Soloviev, V.P.: Effects of the number of ECAP passes and ECAP route on the heterogeneity in mechanical properties across the sample from ultrafine copper. Rev. Adv. Mater. Sci. 10, 34–40 (2005)

213.

Raab, G.J., Valiev, R.Z., Lowe, T.C., Zhu, Y.T.: Continuous processing of ultrafine grained Al by ECAP—conform. Mater. Sci. Eng., A 382, 30 (2004)

214.

Lowe, T.C., Valiev, R.Z.: The use of severe plastic deformation techniques in grain refinement. JOM 56, 64–68 (2004)

215.

Nita, N., Schaeublin, R., Victoria, M., Valiev, R.Z.: Effects of irradiation on the microstructure and mechanical properties of nanostructured materials. Phil. Mag. 85, 723 (2005)

216.

Kilmametov, A.R., Gunderov, D.V., Valiev, R.Z., Balogh, A.G., Hahn, H.: Enhanced ion irradiation resistance of bulk nanocrystalline TiNi alloy. Scripta Mater. 59, 1027–1030 (2008)

217.

Radiguet, B., Etienne, A., Pareige, P., Sauvage, X., Valiev, R.: Irradiation behavior of nanostructured 316 austenitic stainless steel. J. Mater. Sci. 43, 7338–7343 (2008)

218.

Revathy Rajan, P.B., Monnet, I., Hug, E., Etienne, A., Enikeev, N., Keller, C., Sauvage, X., Valiev, R., Radiguet, B.: Irradiation resistance of a nanostructured 316 austenitic stainless steel. IOP Conf. Ser.: Mater. Sci. Eng. 63, 012121 (2014)

219.

Shamardin, V.K., Goncharenko, YuD, Bulanova, T.M., Karsakov, A.A., Alexandrov, I.V., Abramova, M.M., Karavaeva, M.V.: Effect of neutron irradiation on microstructure and properties of austenitic AISI 321 steel, subjected to equal-channel angular pressing. Rev. Adv. Mater. Sci. 31, 167–173 (2012)

220.

Alsabbagh, A., Valiev, R.Z., Murty, K.L.: Influence of grain size on radiation effects in a low carbon steel. J. Nucl. Mater. 443, 302–310 (2013)

221.

Alsabbagh, A., Sarkar, A., Miller, B., Burns, J., Squires, L., Porter, D., Cole, J.I., Murty, K.L.: Microstructure and mechanical behavior of neutron irradiated ultrafine grained ferritic steel. Mater. Sci. Eng., A 615, 128–138 (2014)

222.

Roy, I., Yang, H.W., Dinh, L., Lund, I., Earthman, J.C., Mohamed, F.A.: Possible origin of superior corrosion resistance for electrodeposited nanocrystalline Ni. Scripta Mater. 59, 305–308 (2008)

223.

Ralston, K.D., Birbilis, N.: Effect of grain size on corrosion: a review. Corrosion 66, 075005 (2010)

224.

Kim, H.S., Yoo, S.J., Ahn, J.W., Kim, D.H., Kim, W.J.: Ultrafine grained titanium sheets with high strength and high corrosion resistance. Mater. Sci. Eng., A 528, 8479–8485 (2011)

225.

Balyanov, A., Kutnyakova, J., Amirkhanova, N.A., Stolyarov, V.V., Valiev, R.Z., Liao, X.Z., Zhao, Y.H., Jiang, Y.B., Xu, H.F., Lowe, T.C., Zhu, Y.T.: Corrosion resistance of ultra fine-grained Ti. Scripta Mater. 51, 225–229 (2004)

226.

Hoseini, M., Shahryari, A., Omanovic, S., Szpunar, J.A.: Comparative effect of grain size and texture on the corrosion behaviour of commercially pure titanium processed by equal channel angular pressing. Corros. Sci. 51, 3064–3067 (2009)

227.

Kim, H.S., Kim, W.J.: Annealing effects on the corrosion resistance of ultrafine-grained pure titanium. Corros. Sci. 89, 331–337 (2014)

228.

Kim, H.S., Kim, W.J.: Enhanced corrosion resistance of ultrafine-grained AZ61 alloy containing very fine particles of Mg17Al12 phase. Corros. Sci. 75, 228–238 (2013)

229.

Jinlong, L., Hongyun, L.: Comparison of corrosion properties of passive films formed on phase reversion induced nano/ultrafine-grained 321 stainless steel. Appl. Surf. Sci. 280, 124–131 (2013)

230.

Zhang, L., Ma, A., Jiang, J., Yang, D., Song, D., Chen, J.: Sulphuric acid corrosion of ultrafine-grained mild steel processed by equal-channel angular pressing. Corros. Sci. 75, 434–442 (2013)

231.

Hadzima, B., Janeček, M., Estrin, Y., Kim, H.S.: Microstructure and corrosion properties of ultrafine-grained interstitial free steel. Mater. Sci. Eng., A 462, 243–247 (2007)

232.

Shahryari, A., Szpunar, J.A., Omanovic, S.: The influence of crystallographic orientation distribution on 316LVM stainless steel pitting behavior. Corros. Sci. 51, 677–682 (2009)

233.

Song, D., Ma, A.B., Jiang, J., Lin, P., Yang, D., Fan, J.: Corrosion behavior of equal-channel-angular-pressed pure magnesium in NaCl aqueous solution. Corros. Sci. 52, 481–490 (2010)

234.

Song, D., Ma, A., Jiang, J., Lin, P., Yang, D., Fan, J.: Corrosion behaviour of bulk ultra-fine grained AZ91D magnesium alloy fabricated by equal-channel angular pressing. Corros. Sci. 53, 362 (2011)

235.

Wei, W., Wei, K.X., Du, Q.B.: Corrosion and tensile behaviors of ultra-fine grained Al–Mn alloy produced by accumulative roll bonding. Mater. Sci. Eng., A 454–455, 536–541 (2007)

236.

Sharma, M.M., Ziemian, C.W.: Pitting and stress corrosion cracking susceptibility of nanostructrued Al–Mg alloys in natural and artificial environments. J. Mater. Eng. Perf. 17, 870–878 (2008)

237.

Naeini, M.F., Shariat, M.H., Eizadjou, M.: On the chloride-induced pitting of ultra fine grains 5052 aluminum alloy produced by accumulative roll bonding process. J. Alloys Compds. 509, 4696–4700 (2011)

238.

Hockauf, M., Meyer, L.W., Nickel, D., Alisch, G., Lampke, T., Wielage, B., Kruger, L.: Mechanical properties and corrosion behaviour of ultrafine-grained AA6082 produced by equal-channel angular pressing. J. Mater. Sci. 43, 7409–7417 (2008)

239.

Sikora, E., Wei, X.J., Shaw, B.A.: Corrosion behavior of nanocrystalline Al–Mg based alloys. Corrosion 60, 387–397 (2004)

240.

Gurao, N.P., Manivasagam, G., Govindaraj, P., Asokamani, R., Suwas, S.: Effect of texture and grain size on bio-corrosion response of ultrafine-grained titanium. Metall. Mater. Trans. A 44, 5602–5610 (2013)

241.

Balakrishnan, A., Lee, B.C., Kim, T.N., Panigrahi, B.B.: Corrosion behaviour of ultra fine grained titanium in simulated body fluid for implant application. Trends Biomater. Artif. Organs 22, 54–60 (2008)

242.

Gu, X.N., Li, N., Zheng, Y.F., Kang, F., Wang, J.T., Ruan, L.: In vitro study on equal channel angular pressing AZ31 magnesium alloy with and without back pressure. Mater. Sci. Eng., B 176, 1802–1806 (2011)

243.

Ralston, K.D., Birbilis, N., Davies, C.H.J.: Revealing the relationship between grain size and corrosion rate of metals. Scripta Mater. 63, 1201–1204 (2010)

244.

Ralston, K.D., Fabijanic, D., Birbilis, N.: Effect of grain size on corrosion of high purity aluminium. Electrochim. Acta 56, 1729–1736 (2011)

245.

Birbilis, N., Ralston, K.D., Virtanen, S., Fraser, H.L., Davies, C.H.J.: Grain character influences on corrosion of ECAPed pure magnesium. Corros. Eng. Sci. Tech. 45, 224 (2010)

246.

op’t Hoog, C., Birbilis, N., Estrin, Y.: Corrosion of pure Mg as a function of grain size and processing route. Adv. Eng. Mater. 10, 579 (2008)

247.

Liu, K.T., Duh, J.G.: Grain size effects on the corrosion behaviour of Ni50.5Ti49.5 and Ni45.6Ti49.3Al5.1 films. J. Electroanal. Chem. 618, 45 (2008)

248.

Ghosh, S.K., Dey, G.K., Dusane, R.O., Grover, A.K.: Improved pitting corrosion behaviour of electrodeposited nanocrystalline Ni–Cu alloys in 3.0 wt% NaCl solution. J. Alloys Compd. 426, 235 (2006)

249.

Mahmoud, T.S.: Effect of friction stir processing on electrical conductivity and corrosion resistance of AA6063-T6 Al alloy. J. Mech. Eng. Sci. 222, 1117 (2008)

250.

Lin, P., Palumbo, G., Erb, U., Aust, K.T.: Influence of grain boundary character distribution on sensitization and intergranular corrosion of alloy 600. Scripta Metall. Mater. 33, 1387 (1995)

251.

Mishnaevsky Jr, L., Levashov, E., Valiev, R.Z., Segurado, J., Sabirov, I., Enikeev, N., Prokoshkin, S., Solov’yov, A.V., Korotitskiy, A., Gutmanas, E., Gotman, I., Rabkin, E., Psakh’e, S., Dluhos, L., Seefeldt, M., Smolin, A.: Nanostructured titanium-based materials for medical implants: modeling and development. Mater. Sci. Eng., R 81, 1–19 (2014)

252.

Williams, D.F.: On the mechanisms of biocompatibility. Biomaterials 29, 2941–2953 (2008)

253.

Niinomi, M.: Biologically and mechanically biocompatible titanium alloys. Mater. Trans. 49, 2170–2178 (2008)

254.

Geetha, M., Singh, A.K., Asokamani, R., Gogia, A.K.: Ti based biomaterials, the ultimate choice for orthopaedic implants—a review. Prog. Mater Sci. 54, 397–425 (2009)

255.

Long, M., Rack, H.J.: Titanium alloys in total joint replacement—a materials science perspective. Biomaterials 19, 1621–1639 (1998)

256.

Lowe, T.C., Valiev, R.Z.: Bulk nanostructured metals in biomedical applications. In: Tiwari, A., Nordin, A.N. (eds.) Advanced Biomaterials and Biodevices Frontiers, pp. 1–52. Wiley-Scrivener, New York (2014)

257.

Bagherifard, S., Ghelichi, R., Khademhosseini, A., Guagliano, M.: Cell response to nanocrystallized metallic substrates obtained through severe plastic deformation. ACS Appl. Mater. Interf. 11, 7963 (2014)

258.

Webster, T.J., Ejiofor, J.U.: Increased osteoblast adhesion on nanophase metals: Ti, Ti6Al4V, and CoCrMo. Biomaterials 25, 4731–4739 (2004)

259.

Ward, B.C., Webster, T.J.: Increased functions of osteoblasts on nanophase metals. Mater. Sci. Eng., C 27, 575–578 (2007)

260.

Faghihi, S., Zhilyaev, A.P., Szpunar, J.A., Azari, F., Vali, H., Tabrizian, M.: Nanostructuring of a titanium material by high-pressure torsion improves pre-osteoblast attachment. Adv. Mater. 19, 1069–1073 (2007)

261.

Faghihi, S., Azari, F., Zhilyaev, A.P., Szpunar, J.A., Vali, H., Tabrizian, M.: Cellular and molecular interactions between MC3T3-E1 pre-osteoblasts and nanostructured titanium produced by high-pressure torsion. Biomaterials 28, 3887–3985 (2007)

262.

Valiev, R.Z., Semenova, I.P., Latysh, V.V., Rack, H., Lowe, T.C., Petruzelka, J., Dluhos, L., Hrusak, D., Sochova, J.: Nanostructured titanium for biomedical applications. Adv. Eng. Mater. 10(8), B15–B17 (2008)

263.

Estrin, Y., Kasper, C., Diederichs, S., Lapovok, R.: Accelerated growth of preosteoblastic cells on ultrafine grained titanium. J. Biomed. Mater. Res. A. 90, 1239–1242 (2009)

264.

Nie, F.L., Zheng, Y.F., Cheng, Y., Wei, S.C., Valiev, R.Z.: In vitro corrosion and cytotoxicity on microcrystalline, nanocrystalline, and amorphous NiTi alloy fabricated by high pressure torsion. Mater. Lett. 64, 983–986 (2010)

265.

Zheng, C.Y., Nie, F.L., Zheng, Y.F., Cheng, Y., Wei, S.C., Valiev, R.Z.: Enhanced in vitro biocompatibility of ultrafine-grained titanium with hierarchical porous surface. Appl. Surf. Sci. 257, 5634–5640 (2011)

266.

267.

Estrin, Y., Ivanova, E.P., Michalska, A., Truong, V.K., Lapovok, R., Boyd, R.: Accelerated stem cell attachment to ultrafine grained titanium. Acta Biomater. 7, 900–906 (2011)

268.

Venkatsurya, P.K.C., Girase, B., Misra, R.D.K., Pesacreta, T.C., Somani, M.C., Karjalainen, L.P.: The interplay between osteoblast functions and the degree of nanoscale roughness induced by grain boundary grooving of nanograined materials. Mater. Sci. Eng., C 32, 330–340 (2012)

269.

Korotin, D.M., Bartkowski, S., Kurmaev, E.Z., Neumann, M., Yakushina, E.B., Valiev, R.Z., Cholakh, S.O.: Surface studies of coarse-grained and nanostructured titanium implants. J. Nanosci. Nanotech. 12, 8567–8572 (2012)

270.

Misra, R.D.K., Nune, C., Pesacreta, T.C., Somani, M.C., Karjalainen, L.P.: Understanding the impact of grain structure in austenitic stainless steel from a nanograined regime to a coarse-grained regime on osteoblast functions using a novel metal deformation-annealing sequence. Acta Biomater. 9, 6245–6258 (2013)

271.

Zhu, Y.T., Lowe, T.C., Valiev, R.Z., Stolyarov, V.V., Latysh, V.V., Raab, G.I.: Ultra-fine-grained titanium for medical implants. U.S. Patent No. US6399215 B1, 4 June 2002

272.

Re, F., Zanetti, A., Sironi, M., Polentarutti, N., Lanfrancone, L., Dejana, E., Collotta, F.: Inhibition of anchorage-dependent cell spreading triggers apoptosis in cultured human endothelial cells. J. Cell Biol. 127, 537–546 (1994)

273.

Yamanaka, K., Mori, M., Chiba, A.: Origin of significant grain refinement in Co–Cr–Mo alloys without severe plastic deformation. Metall. Mater. Trans. A 43, 4875–4887 (2012)

274.

Yamanaka, K., Mori, M., Chiba, A.: Enhanced mechanical properties of As-forged Co–Cr–Mo–N alloys with ultrafine-grained structures. Metallur. Mater. Trans. A. 43, 5243–5257 (2012)

275.

Bauer, S., Schmuki, P., von der Mark, K., Park, J.: Engineering biocompatible implant surfaces Part I: materials and surfaces. Prog. Mater. Sci. 58, 261–326 (2013)

276.

Zhou, J., Sun, C., Wu, X., Tao, N., Liu, G., Meng, X., Hong, Y.: Nanocrystalline formation during mechanical attrition of cobalt. Mater. Sci. Forum 503–504, 751–756 (2006)

277.

Jiang, J., Ren, J., Shan, A., Liu, J., Song, H.: Surface nanocrystallization of Ni₃Al by surface mechanical attrition treatment. Mater. Sci. Eng., A 520, 80–89 (2009)

278.

Ren, J., Li, D., Xu, P.: Surface nanocrystallines of Fe₃Al produced by surface mechanical attrition. Adv. Mater. Res. 320, 325–328 (2011)

279.

Li, W., Xu, W., Wang, X., Rong, Y.: Measurement of microstructural parameters of nanocrystalline Fe-30 wt%Ni alloy produced by surface mechanical attrition treatment. J. Alloys Compd. 474, 546–550 (2009)

280.

Zhao, C., Zhao, C., Cao, P., Ji, W., Han, P., Zhang, J., Zhang, F., Jiang, Y., Zhang, X.: Hierarchical titanium surface textures affect osteoblastic functions. J. Biomed. Mater. Res. A. 99, 666–675 (2011)

281.

Lin, C.C., Cheng, H.C., Huang, C.F., Lin, C.T., Lee, S.Y., Chen, C.S., Ou, K.L.: Enhancement of biocompatibility on bioactive Ti surface by low temperature plasma treatment. Jap. J. Appl. Phys. 44, 8590–8598 (2005)

282.

Li, H., Zheng, Y., Qin, L.: Progress of biodegradable metals. Prog. Nat. Sci.: Mater. Int. 24, 414–422 (2014)

283.

Zheng, Y.F., Gu, X.N., Witte, F.: Biodegradable metals. Mater. Sci. Eng. R. 77, 1–34 (2014)

284.

Brar, H.S., Platt, M.O., Sarntinoranont, M., Martin, P.I., Manuel, M.V.: Magnesium as a biodegradable and bioabsorbable material for medical implants. JOM 61, 31–34 (2009)

285.

Waizy, H., Seitz, J.M., Reifenrath, J., Weizbauer, A., Bach, F.W., Meyer-Lindenberg, A., Denkena, B., Windhagen, H.: Biodegradable magnesium implants for orthopedic applications. J. Mater. Sci. 48, 39–50 (2013)

286.

Vojtich, D., Elova, H., Volenec, K.: Investigation of magnesium-based alloys for biomedical applications. Kovove Mater. 44, 206–219 (2006)

287.

Staiger, M.P., Pietak, A.M., Huadmai, J., Dias, G.: Magnesium and its alloys as orthopedic biomaterials: a review. Biomaterials 27, 1728–1734 (2006)

288.

Mostaed, E., Hashempour, M., Fabrizi, A., Dellasega, D., Bestetti, M., Bonollo, F., Vedani, M.: Microstructure, texture evolution, mechanical properties and corrosion behavior of ECAP processed ZK60 magnesium alloy for biodegradable applications. J. Mech. Behav. Biomed. Mater. 37, 307–322 (2014)

289.

Li, Z., Gu, X., Lou, S., Zheng, Y.: The development of binary Mg–Ca alloys for use as biodegradable materials within bone. Biomaterials 29, 1329 (2008)

290.

Zhang, S., Zhang, X., Zhao, C., Li, J., Song, Y., Xie, C., Tao, H., Zhang, Y., He, Y., Jiang, Y., Bian, Y.: Research on an Mg–Zn alloy as a degradable biomaterial. Acta Biomater. 6, 626 (2010)

291.

Bahl, S., Suwas, S., Chatterjee, K.: The control of crystallographic texture in the use of magnesium as a resorbable biomaterial. RSC Adv. 4, 55677–55684 (2014)

292.

Yang, J., Cui, F., Lee, I.S.: Surface modifications of magnesium alloys for biomedical applications. Ann. Biomed. Eng. 39, 1857–1871 (2011)

293.

Wang, J., Tang, J., Zhang, P., Li, Y., Wang, J., Lai, Y., Qin, L.: Surface modification of magnesium alloys developed for bioabsorbable orthopedic implants: a general review. J. Biomed. Mater. Res. B 100, 1691–1701 (2012)

Titel: Multifunctional Properties of Bulk Nanostructured Metallic Materials
verfasst von: I. Sabirov
N. A. Enikeev
M. Yu. Murashkin
R. Z. Valiev
Verlag: Springer International Publishing
Buch: Bulk Nanostructured Materials with Multifunctional Properties
Print ISBN: 978-3-319-19598-8

Electronic ISBN: 978-3-319-19599-5

Copyright-Jahr: 2015
DOI: https://doi.org/10.1007/978-3-319-19599-5_3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht