nach oben

Russian Journal of Nondestructive Testing

Erschienen in:

01.04.2023 | ACOUSTIC METHODS

Multiple Damage Prediction in Tubular Rectangular Beam Model Using Frequency Response-Based Mode Shape Curvature with Back-Propagation Neural Network

verfasst von: Sonu Kumar Gupta, Surajit Das

Erschienen in: Russian Journal of Nondestructive Testing | Ausgabe 4/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In the civil infrastructure, the structures made up of tubular sections played an important role due to an economic point of view, lower self-weight, and stability against functional loads. The periodical maintenance or inspection of the structure is mandatory nowadays to achieve the potential utilization of the structural system. In this study, an experimental, numerical, and analytical study is carried out to investigate the structural fault and its severity in a tubular rectangular beam made up of structural steel. Modal parameters are extracted with the help of a dynamic data logger (B&K) by exciting an impact hammer on model structure and extracting a data with a set of unidirectional accelerometers. First, two displacement mode shapes are extracted using obtained modal parameters. The modal parameters are expected to contain environmental noise during experimentation, so, de-noising is must to obtain noise-free data. Artificial neural network training is utilized to reduce the noise from experimental modal parameters. Using the modified modal parameters, the mode shape curvature is obtained, and so-called modified mode shape curvature (MMSC) is used to calculate the curvature damage index. The curvature damage index is appropriate to investigate multiple fault locations with different fault levels in tubular rectangular beam structures.

Vorheriger Artikel Acoustic Characteristics of Solid Elastic Media with Oriented Microcracking

Nächster Artikel Measurement of Dynamic Elastic Modulus and Poisson’s Ratio of Sugarcane Core by Cantilever Beam Vibration Method

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Wahab, M.A. and De Roeck, G., Damage detection in bridges using modal curvatures: application to a real damage scenario, J. Sound Vib., 1999, vol. 226, no. 2, pp. 217–235. https://doi.org/10.1006/jsvi.1999.2295CrossRef

Owolabi, G.M., Swamidas, A.S.J., and Seshadri, R., Crack detection in beams using changes in frequencies and amplitudes of frequency response functions, J. Sound Vib., 2003, vol. 265, no. 1, pp. 1–22. https://doi.org/10.1016/S0022-460X(02)01264-6CrossRef

Sinou, Jean-Jacques, Damage assessment based on the frequencies’ ratio surfaces intersection method for the identification of the crack depth, location and orientation, Struct. Durability Health Monit., 2007, vol. 3, no. 3, pp. 134–162.

Altunışık, Ahmet Can, Fatih Yesevi Okur, and Volkan Kahya, Structural identification of a cantilever beam with multiple cracks: Modeling and validation, Int. J. Mech. Sci., 2017, vol. 130, pp. 74–89. https://doi.org/10.1016/j.ijmecsci.2017.05.039CrossRef

Yazdekhasti, Sepideh, Kalyan R. Piratla, Sez Atamturktur, and Abdul Khan, Experimental evaluation of a vibration-based leak detection technique for water pipelines, Struct. Infrastruct. Eng., 2018, vol. 14, no. 1, pp. 46–55. https://doi.org/10.1080/15732479.2017.1327544CrossRef

Altunışık, Ahmet Can, Fatih Yesevi Okur, Sebahat Karaca, and Volkan Kahya, Vibration-based damage detection in beam structures with multiple cracks: modal curvature vs. modal flexibility methods, Nondestr. Test. Eval., 2019, vol. 34, no. 1, pp. 33–53. https://doi.org/10.1080/10589759.2018.1518445CrossRef

Roy, Koushik, Structural damage identification using mode shape slope and curvature, J. Eng. Mech., 2017, vol. 143, no. 9, p. 04017110. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001305CrossRef

Feng Dongming and Maria Q. Feng, Output-only damage detection using vehicle-induced displacement response and mode shape curvature index, Struct. Control Health Monit., 2016, vol. 23, no. 8, pp. 1088–1107. https://doi.org/10.1002/stc.1829CrossRef

Pandey, A.K., Biswas, M., and Samman, M.M., Damage detection from changes in curvature mode shapes, J. Sound Vib., 1991, vol. 145, no. 2, pp. 321–332. https://doi.org/10.1016/0022-460X(91)90595-BCrossRef

10.

Brigham, E.O., The Fast Fourier Transform and Applications, Englewood Cliffs: Prentice Hall, 1988.

11.

Zenzen, R., Samir Khatir, Belaidi, I., and Magd Abdel Wahab, Structural health monitoring of beam-like and truss structures using frequency response and particle swarm optimization, In: Numerical Modelling in Engineering, Singapore: Springer, 2018, pp. 390–399. https://doi.org/10.1007_978-981-13-2273-0_30

12.

Worden Keith, Charles R. Farrar, Jonathan Haywood, and Michael Todd, A review of nonlinear dynamics applications to structural health monitoring, Struct. Control Health Monit., 2008, vol. 15, no. 4, pp. 540–567. https://doi.org/10.1002/stc.215CrossRef

13.

Rafael de la Cruz, V., Salehi Paniagua, K., Salgado Sánchez, P., and García-Fogeda, P., A vibration-based method for assessing the integrity of welded structures, Nondestr. Test. Eval., 2020, vol. 35, no. 4, pp. 452–472. https://doi.org/10.1080/10589759.2019.1692011CrossRef

14.

Pooya Seyed Majid Hosseini and Ali Massumi, A novel and efficient method for damage detection in beam-like structures solely based on damaged structure data and using mode shape curvature estimation, Appl. Math. Model., 2021, vol. 91, pp. 670–694. https://doi.org/10.1016/j.apm.2020.09.012CrossRef

15.

Sha Ganggang, Maciej Radzieński, Maosen Cao, and Wiesław Ostachowicz, A novel method for single and multiple damage detection in beams using relative natural frequency changes, Mech. Syst. Signal Process., 2019, vol. 132, pp. 335–352. https://doi.org/10.1016/j.ymssp.2019.06.027CrossRef

16.

Gorgin Rahim, Damage identification technique based on mode shape analysis of beam structures, in Structures, Amsterdam: Elsevier, 2020, vol. 27, pp. 2300–2308. https://doi.org/10.1016/j.istruc.2020.08.034

17.

Nick Hooman and Armin Aziminejad, Vibration-based damage identification in steel girder bridges using artificial neural network under noisy conditions, J. Nondestr. Eval., 2021, vol. 40, no. 1, pp. 1–22. https://doi.org/10.1007/s10921-020-00744-8CrossRef

18.

Hamey Cole S., Wahyu Lestari, Pizhong Qiao, and Gangbing Song, Experimental damage identification of carbon/epoxy composite beams using curvature mode shapes, Struct. Health Monit., 2004, vol. 3, no. 4, pp. 333–353. https://doi.org/10.1177/1475921704047502CrossRef

19.

Anjneya Kumar and Koushik Roy, Response surface-based structural damage identification using dynamic responses, In: Structures, Amsterdam: Elsevier, 2021, vol. 29, pp. 1047–1058. https://doi.org/10.1016/j.istruc.2020.11.033

20.

Gupta Krishanu, Biplab Bhattacharjee, Sonu Kumar Gupta, and Prasun Chakraborti, Study of natural frequencies of natural rubber cored novel sandwich structure without tip mass, In: Structures, Amsterdam: Elsevier, 2020, vol. 28, pp. 651–658. https://doi.org/10.1016/j.istruc.2020.09.010

21.

Stoykov, S. and Manoach, E., Damage localization of beams based on measured forced responses, Mech. Syst. Signal Process., 2021, vol. 151, p. 107379. https://doi.org/10.1016/j.ymssp.2020.107379CrossRef

22.

Qiao Pizhong, Kan Lu, Wahyu Lestari, and Jialai Wang, Curvature mode shape-based damage detection in composite laminated plates, Compos. Struct., 2007, vol. 80, no. 3, pp. 409–428. https://doi.org/10.1016/j.compstruct.2006.05.026CrossRef

23.

Umar Sarehati, Norhisham Bakhary, and Abidin, A.R.Z., Response surface methodology for damage detection using frequency and mode shape, Measurement, 2018, vol. 115, pp. 258–268. https://doi.org/10.1016/j.measurement.2017.10.047

24.

Gupta, S.K. and Das, S., Damage detection in a cantilever beam using noisy mode shapes with an application of artificial neural network-based improved mode shape curvature technique, Asian J. Civ. Eng., 2021, vol. 22, pp. 1671–1693. https://doi.org/10.1007/s42107-021-00404-wCrossRef

25.

Gupta, S.K. and Das, S., Multiple damage identification in a beam using artificial neural network-based modified mode shape curvature, Arab J. Sci. Eng., 2021, vol. 47, pp. 4849–4864. https://doi.org/10.1007/s13369-021-06267-2CrossRef

26.

Cawley Peter and Robert Darius Adams, The location of defects in structures from measurements of natural frequencies, J. Strain Anal. Eng. Des., 1979, vol. 14, no. 2, pp. 49–57. https://doi.org/10.1243/03093247V142049CrossRef

27.

Hassiotis Sophia and Garrett D. Jeong, Identification of stiffness reductions using natural frequencies, J. Eng. Mech., 1995, vol. 121, no. 10, pp. 1106–1113. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:10(1106)CrossRef

28.

Rucevskis, S. and Miroslaw Wesolowski, Identification of damage in a beam structure by using mode shape curvature squares, Shock Vib., 2010, vol. 17, nos. 4–5, pp. 601–610. https://doi.org/10.3233/SAV-2010-0551CrossRef

29.

Bishop, Christopher M., Neural Networks for Pattern Recognition, Oxford: Oxford Univ. Press, 1995.

30.

Bakhary Norhisham, Hong Hao, and Andrew J. Deeks, Structure damage detection using a neural network with multi-stage substructuring, Adv. Struct. Eng., 2010, vol. 13, no. 1, pp. 95–110. https://doi.org/10.1260/1369-4332.13.1.95CrossRef

31.

Padil Khairul, H., Norhisham Bakhary, Muyideen Abdulkareem, Jun Li, and Hong Hao, Non-probabilistic method to consider uncertainties in frequency response function for vibration-based damage detection using Artificial Neural Network, J. Sound Vib., 2020, vol. 467, p. 115069. https://doi.org/10.1016/j.jsv.2019.115069CrossRef

32.

Hakim, S.J.S., Abdul Razak, H., and Ravanfar, S.A., Fault diagnosis on beam-like structures from modal parameters using artificial neural networks, Measurement, 2015, vol. 76, pp. 45–61. https://doi.org/10.1016/j.measurement.2015.08.021CrossRef

33.

Ismail Harun Mohamed, Hoon Kiat Ng, Cheen Wei Queck, and Suyin Gan, Artificial neural networks modelling of engine-out responses for a light-duty diesel engine fueled with biodiesel blends, Appl. Energ., 2012, vol. 92, pp. 769–777. https://doi.org/10.1016/j.apenergy.2011.08.027CrossRef

34.

Yusaf Talal, F., Buttsworth, D.R., Khalid H. Saleh, and Yousif, B.F., CNG-diesel engine performance and exhaust emission analysis with the aid of artificial neural network, Appl. Energ., 2010, vol. 87, no. 5, pp. 1661–1669. https://doi.org/10.1016/j.apenergy.2009.10.009CrossRef

35.

Bhowmik Subrata, Rajsekhar Panua, Durbadal Debroy, and Abhishek Paul, Artificial neural network prediction of diesel engine performance and emission fueled with Diesel–Kerosene–Ethanol Blends: A fuzzy-based optimization, J. Energ. Resour. Technol., 2017, vol. 139, no. 4. https://doi.org/10.1115/1.4035886

36.

Badri Lubna, Development of neural networks for noise reduction, Int. Arab J. Inf. Technol., 2010, vol. 7, no. 3, pp. 289–294.

37.

Limongelli, M.P., Frequency response function interpolation for damage detection under changing environment, Mech. Syst. Signal Process., 2010, vol. 24, no. 8, pp. 2898–2913.CrossRef

38.

Hassoun, Mohamad H., Fundamentals of Artificial Neural Networks, Cambridge: MIT Press, 1995.

39.

Young Dana and Robert P. Felgar, Tables of Characteristic Functions Representing Nomal Modes of Vibration of a Beam, University of Texas, Austin, 1949.

Titel: Multiple Damage Prediction in Tubular Rectangular Beam Model Using Frequency Response-Based Mode Shape Curvature with Back-Propagation Neural Network
verfasst von: Sonu Kumar Gupta
Surajit Das
Publikationsdatum: 01.04.2023
Verlag: Pleiades Publishing
Erschienen in: Russian Journal of Nondestructive Testing / Ausgabe 4/2023
Print ISSN: 1061-8309
Elektronische ISSN: 1608-3385
DOI: https://doi.org/10.1134/S1061830922601131

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2023

Iterative Reconstruction of Aluminum Casting Images Taking into Account Prior Information

Experimental Method to Enhance Sensitivity and Accuracy of Measurements in Measuring Fracture Parameters around the Crack Tip Using Compact Hololens Imaging System

A New Procedure for High Frequency Decentralized Modeling Parameters Identification of a Transformer Winding Construction Using Frequency Response Analysis Based on Logistic Chaotic JAYA Algorithm

Acoustic Characteristics of Solid Elastic Media with Oriented Microcracking

Enhancement of Rayleigh Wave Generated by Electromagnetic Acoustic Transducer Based on New Magnetic Configuration

Periodontitis Auxiliary Diagnosis Based on Deep Learning and Oral Dental X-ray Images

Premium Partner

Marktübersichten