nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

New Factors of Reliability of Electric Furnaces for Vermiculite Firing with Mobile Base Plates

verfasst von : Anatoliy Nizhegorodov, Aleksey Gavrilin, Boris Moyzes, Kirill Kuvshinov, Saule Sakipova

Erschienen in: Progress in Material Science and Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The article reviews measures to increase the reliable operation of electric furnaces for vermiculite concentrates firing over the entire period of their existence since 2003. A significant step forward in this research was the find that the implementation of suspended heating systems in the electric modules of furnaces, both types such as modular-triggering furnaces and in furnaces with mobile base plates, where the swelling process of the raw material is carried out during the process of its vibrotransportation in the thermal field of the heating system. The imbalance of inertial loads is an additional factor for reducing of operation reliability in furnaces with mobile base plates. The methods of their balancing, discussed in this research, provide the dynamic balance of all moving parts of these furnace units. A study of analytical models of temperature distribution, carried out in previous researchers of the authors, showed that uniform heating can only be achieved in systems with a variable interval for the placement of heaters. The research results carried out in this work at the accepted values of the minimum and maximum intervals show that, compared to the old systems located on the refractory base of the firing modules, the difference temperature decreases significantly, which proves the effectiveness of this approach.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Influence of the Insulation Defects Size on the Value of the Wire Capacitance

Nächstes Kapitel Complex Studies of the Innovative Vortex Burner Device with Optimization of Design

Ding, F., Gao, M., Wang, J., Shen, T., Zang, W.: Tuning wettability by controlling the layer charge and structure of organo-vermiculites. J. Ind. Eng. Chem. 57, 304–312 (2018). https://doi.org/10.1016/j.jiec.2017.08.037CrossRef

Figueiredo, S.: The influence of acid treatments over vermiculite based material as adsorbent for cationic textile dyestuffs. Chemosphere 153, 115–129 (2016). https://doi.org/10.1016/j.chemosphere.2016.03.004CrossRef

Mo, K.H., Lee, H.J., Liu, M.Y.J., Ling, T.C.: Incorporation of expanded vermiculite lightweight aggregate in cement mortar. Constr. Build. Mater. 179, 302–306 (2018). https://doi.org/10.1016/j.conbuildmat.2018.05.219CrossRef

Karatas, M., Benli, A., Toprak, H.A.: Effect of incorporation of raw vermiculite as partial sand replacement on the properties of selfcompacting mortars at elevated temperature. Constr. Build. Mater. 221, 163–176 (2019). https://doi.org/10.1016/j.conbuildmat.2019.06.077CrossRef

Zhang, Y.N., et al.: Development and thermochemical characterizations of vermiculite SrBr₂ Composite sorbents for low-temperature heat storage. Energy 115, 120–128 (2016). https://doi.org/10.1016/j.energy.2016.08.108

Ahirrao, N.S., Bhosle, S.P., Nehete, D.V.: Dynamics and vibration measurements in engines. Proc. Manuf. 20, 434–439 (2018). https://doi.org/10.1016/j.promfg.2018.02.063CrossRef

Shyamal, S., Swartz, C.L.E.: Real-time energy management for electric arc furnace operation. J. Process Control 74, 50–62 (2019). https://doi.org/10.1016/j.jprocont.2018.03.002CrossRef

Nizhegorodov, A.I., Gavrilin, A.N., Moyzes, B.B.: Improving the technology for processing sungulite vermiculite conglomerates. Bulletin of the Tomsk Polytechnic University. Geo Assets Eng. 330(4), 98–109 (2019). https://doi.org/10.18799/24131830/2019/4/230

Fuks, L., Herdzik-Koniecko, I.: Vermiculite as a potential component of the engineered barriers in low- and medium-level radioactive waste repositories. Appl. Clay Sci. 161, 139–150 (2018). https://doi.org/10.1007/s13762-017-1597-3CrossRef

10.

Bryanskikh, T.V., Kokourov, D.V.: Energy efficiency of electric furnaces with movable floor in firing of vermiculite concentrates of different size groups. Refract. Ind. Ceram. 58, 368–373 (2017). https://doi.org/10.1007/s11148-017-0113-0CrossRef

11.

Zvezdin, A.V., Bryanskikh, T.B.: Considering adaptation of electrical ovens with unit-type releasing to peculiarities of thermal energization of mineral raw materials. IOP Conf. Series: Mater. Sci. Eng. 168(1), 012003 (2017). https://doi.org/10.1088/1757-899X/168/1/012003CrossRef

12.

Lysenko, E.N., Surzhikov, A.P., Vlasov, V.A., et al.: Synthesis of substituted lithium ferrites under the pulsed and continuous electron beam heating. Nucl. Instrum. Methods Phys. Res., Sect. B 392, 1–7 (2017). https://doi.org/10.1016/j.nimb.2016.11.042CrossRef

13.

Surzhikov, A.P., Frangulyan, T.S., Ghyngazov, S.A.: A thermoanalysis of phase transformations and linear shrinkage kinetics of ceramics made from ultrafine plasmochemical ZrO₂(Y)-Al₂O₃ powders. J. Therm. Anal. Calorim. 115(2), 1439–1445 (2014). https://doi.org/10.1007/s10973-013-3455-yCrossRef

14.

Surzhikov, A.P., Pritulov, A.M., Lysenko, E.N., Sokolovskii, A.N., Vlasov, V.A., Vasendina, E.A.: Influence of solid-phase ferritization method on phase composition of lithium-zinc ferrites with various concentration of zinc. J. Therm. Anal. Calorim. 109(1), 63–67 (2012). https://doi.org/10.1007/s10973-011-1366-3CrossRef

15.

Gvozdkova, S.I., Shvartsburg, L.E.: Analysis of sources and methods for reducing noise by minimizing vibrations of engineering technological processes. Proc. Eng. 206, 958–964 (2017). https://doi.org/10.1016/j.proeng.2017.10.578CrossRef

16.

Nizhegorodov, A.I., Zvezdin, A.V.: Study of an electric furnace physical model for firing vermiculite with a “zero” module. Refract. Ind. Ceram. 57(3), 246–251 (2016)CrossRef

17.

İşçi, S.: Intercalation of vermiculite in presence of surfactants. Appl. Clay. Sci. 146, 7–13 (2017)CrossRef

18.

Ritz, M., Zdrálková, J., Valášková, M.: Vibrational spectroscopy of acid treated vermiculites. Vib. Spectrosc. 70, 63–69 (2014). https://doi.org/10.1016/j.vibspec.2013.11.007CrossRef

19.

Contreras-Serna, J., Rivera-Solorio, C.I., Herrera-García, M.A.: Study of heat transfer in a tubular-panel cooling system in the wall of an electric arc furnace. Appl. Therm. Eng. 148, 43–56 (2019). https://doi.org/10.1016/j.applthermaleng.2018.10.134CrossRef

20.

Nizhegorodov, A.I., Bryanskikh, T.B., Gavrilin, A.N., Moyzes, B.B., Gradoboev, A.V., Vavilova, G.V., Tlusty, J., Tuzikova, V.: Testing a new alternative electric furnace for vermiculite concentrates heat treatment. Bulletin of the Tomsk Polytechnic University. Geo Assets Eng. 329(4), 142–153 (2018)

21.

Xu, W., Zhang, J., Zhang, R.: Application of multi-model switching predictive functional control on the temperature system of an electric heating furnace. ISA Trans. 68, 287–292 (2017). https://doi.org/10.1016/j.isatra.2017.02.001CrossRef

22.

Viti, C., Hirose, T.: Thermal decomposition of serpentine during coseismic faulting: Nanostructures and mineral reactions. J. Struct. Geol. 32(10), 1476–1484 (2010)CrossRef

23.

Santamaria, A., Faleschini, F., Giacomello, G., et al.: Dimensional stability of electric arc furnace slag in civil engineering applications. J. Clean. Prod. 205, 599–609 (2018). https://doi.org/10.1016/j.jclepro.2018.09.122CrossRef

24.

Sutcun, M.: Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks. Ceram. Int. 41, 2819–2827 (2015). https://doi.org/10.1016/j.conbuildmat.2019.07.080CrossRef

25.

Kariya, J., Ryu, J., Kato, Y.: Development of thermal storage material using vermiculite and calcium hydroxide. Appl. Therm. Eng. 94, 186–192 (2016). https://doi.org/10.1016/j.applthermaleng.2015.10.090CrossRef

26.

Lozano-Lunar, A., et al.: Safe use of electric arc furnace dust as secondary raw material in selfcompacting mortars production. J. Clean. Prod. 211, 1375–1388 (2019). https://doi.org/10.1016/j.jclepro.2018.12.002CrossRef

27.

Soleimanimehr, H., Nategh, M.J., Najafabadi, A.F., Zarnan, A.: The analysis of the Timoshenko transverse vibrations of workpiece in the ultrasonic vibration-assisted turning process and investigation of the machining error caused by this vibration. Precis. Eng. 54, 99–106 (2018)CrossRef

28.

Paczkowski, T., Troszyński, A.: The effect of multidirectional vibration on electrochemical machining. Proc. Manuf. 22, 41–48 (2018). https://doi.org/10.1016/j.promfg.2018.03.008CrossRef

29.

Wang, Zh., Zhang, J.: Existence of periodic solutions for a class of damped vibration probl lems. CR MATH 356(6), 597–612 (2018). https://doi.org/10.1016/j.amc.2008.10.020CrossRef

30.

Redko, V.V., Starikova, N.S., Redko, L.A., Vavilova, G.V.: Determination of sensitivity for in-process control of cable product insulation. IOP Conf. Ser.: Mater. Sci. Eng. 81(1), 012083 (2015). https://doi.org/10.1088/1757-899X/81/1/012083CrossRef

Titel: New Factors of Reliability of Electric Furnaces for Vermiculite Firing with Mobile Base Plates
verfasst von: Anatoliy Nizhegorodov
Aleksey Gavrilin
Boris Moyzes
Kirill Kuvshinov
Saule Sakipova
Verlag: Springer International Publishing
Buch: Progress in Material Science and Engineering
Print ISBN: 978-3-030-68102-9

Electronic ISBN: 978-3-030-68103-6

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-68103-6_12

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten