nach oben

Physics of Metals and Metallography

Erschienen in:

01.08.2023 | STRENGTH AND PLASTICITY

On Crack Initiation Near Stress Sources with Weak Divergences

verfasst von: S. V. Kirikov, V. N. Perevezentsev, A. S. Pupynin

Erschienen in: Physics of Metals and Metallography | Ausgabe 8/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Analytical expressions are obtained for the configurational force and the value of the relaxation of the elastic energy during the initiation of a microcrack in a small neighborhood of an arbitrary singular stress source. When analyzing the conditions for crack initiation at sources with weak divergences, the concepts of instantaneous initiation of a finite-length crack were used. As a criterion for the initiation of such a crack, the simultaneous fulfillment of the force and energy conditions is considered. Within these concepts, in the configuration space of the system parameters (geometrical characteristics and strength of mesodefects and the value of external stress), the regions are determined where cracks can nucleate in the case of a combined mesodefect, which is a superposition of junction disclination dipole and a planar shear mesodefect. It is shown that the crack initiation is greatly facilitated by the loss of stability of a shear mesodefect.

Vorheriger Artikel Evolution of the Structure and Mechanical Properties of Medium-Carbon Microalloyed Steel during High-Temperature Tempering

Nächster Artikel Low-Temperature Superplasticity of the 1565ch Al–Mg Alloy in Ultrafine-Grained and Nanostructured States

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

V. V. Rybin, Large Plastic Deformations and Fracture of Metals (Metallurgiya, Moscow, 1986).

V. V. Rybin and A. A. Zisman, “Joint disclination in plastically-deformed crystals,” Fiz. Tverd. Tela 27, 181–186 (1985).

V. V. Rybin, A. A. Zisman, and N. Yu. Zolotorevsky, “Junction disclinations in plastically deformed crystals,” Acta Metall. Mater. 41, 2211–2217 (1993). https://doi.org/10.1016/0956-7151(93)90390-eCrossRef

V. I. Vladimirov and A. E. Romanov, Disclinations in Crystals (Nauka, Leningrad, 1986).

N. A. Enikeev, T. S. Orlova, I. V. Alexandrov, and A. E. Romanov, “A physical criterion for the grain subdivision during SPD,” Solid State Phenom. 101–102, 319–324 (2005). https://doi.org/10.4028/www.scientific.net/ssp.101-102.319

A. A. Nazarov, N. A. Enikeev, A. E. Romanov, T. S. Orlova, I. V. Alexandrov, I. J. Beyerlein, and R. Z. Valiev, “Analysis of substructure evolution during simple shear of polycrystals by means of a combined viscoplastic self-consistent and disclination modeling approach,” Acta Mater. 54, 985–995 (2006). https://doi.org/10.1016/j.actamat.2005.10.025CrossRef

A. E. Romanov and A. L. Kolesnikova, “Application of disclination concept to solid structures,” Prog. Mater. Sci. 54, 740–769 (2009). https://doi.org/10.1016/j.pmatsci.2009.03.002CrossRef

V. V. Rybin, V. N. Perevezentsev, and Yu. V. Svirina, “A physical model for the initial stages of the fragmentation of polycrystals in the process of developed plastic deformation,” Phys. Met. Metallogr. 118, 1171–1175 (2017). https://doi.org/10.1134/S0031918X17120110CrossRef

A. A. Zisman and V. V. Rybin, “Basic configurations of interfacial and junction defects induced in a polycrystal by deformation of grains,” Acta Mater. 44, 403–407 (1996). https://doi.org/10.1016/1359-6454(95)00155-8CrossRef

10.

V. V. Rybin, A. N. Vergazov, and Yu. V. Solomko, “Regularities of intra-grain fracture of metals with bcc lattice,” Fiz. Met. Metalloved. 46, 582–596 (1978).

11.

R. N. Gardner, T. C. Pollock, and H. G. F. Wilsdorf, “Crack initiation at dislocation cell boundaries in the ductile fracture of metals,” Mater. Sci. Eng. 29, 169–174 (1977). https://doi.org/10.1016/0025-5416(77)90123-9CrossRef

12.

N. A. Koneva, L. I. Trishkina, and T. V. Cherkasova, “Gradient dislocation substructures at fracture of polycrystalline Cu–Mn alloys,” Lett. Mater. 8, 435–439 (2018). https://doi.org/10.22226/2410-3535-2018-4-435-439CrossRef

13.

V. V. Rybin and I. M. Zhukovskii, “Disclination mechanism of microcrack formation,” Sov. Phys. Solid State 20, 1056–1059 (1978).

14.

I. M. Zhukovskii and V. V. Rybin, “Equilibrium cracks in fragmented crystals,” Sov. Phys. Solid State 33, 728–732 (1991).

15.

V. I. Vladimirov, M. Yu. Gutkin, and A. E. Romanov, “Effect of lamellar terminations on the physicomechanical properties of eutectic composites,” Mech. Compos. Mater. 23, 313–319 (1987). https://doi.org/10.1007/bf00811689CrossRef

16.

M. Yu. Gutkin and I. A. Ovid’ko, “Disclinations, amorphization and microcrack generation at grain boundary junctions in polycrystalline solids,” Philos. Mag. A 70, 561–575 (1994). https://doi.org/10.1080/01418619408242248CrossRef

17.

M. Yu. Gutkin and I. A. Ovid’ko, “Nanocracks at grain boundaries in nanocrystalline materials,” Philos. Mag. Lett. 84, 655–663 (2004). https://doi.org/10.1080/09500830512331329123CrossRef

18.

M. Yu. Gutkin, I. A. Ovid’ko, and N. V. Skiba, “Generation of nanocracks at grain boundary disclinations in nanocomposite materials,” Rev. Adv. Mater. Sci. 10, 483–489 (2005).

19.

I. A. Ovid’ko and A. G. Sheinerman, “Triple junction nanocracks in deformed nanocrystalline materials,” Acta Mater. 52, 1201–1209 (2004). https://doi.org/10.1016/j.actamat.2003.11.004CrossRef

20.

M. S. Wu, K. Zhou, and A. A. Nazarov, “Stability and relaxation mechanisms of a wedge disclination in an HCP bicrystalline nanowire,” Modell. Simul. Mater. Sci. Eng. 14, 647–661 (2006). https://doi.org/10.1088/0965-0393/14/4/008CrossRef

21.

J. Luo, K. Zhou, and Z. M. Xiao, “Stress investigation on a Griffith crack initiated from an eccentric disclination in a cylinder,” Acta Mech. 202, 65–77 (2009). https://doi.org/10.1007/s00707-008-0010-1CrossRef

22.

J. Luo, Z. M. Xiao, and K. Zhou, “Stress analysis on a Zener crack nucleation from an eccentric wedge disclination in a cylinder,” Int. J. Eng. Sci. 47, 811–820 (2009). https://doi.org/10.1016/j.ijengsci.2009.05.006CrossRef

23.

T. Wang, J. Luo, Z. Xiao, and J. Chen, “On the nucleation of a Zener crack from a wedge disclination dipole in the presence of a circular inhomogeneity,” Eur. J. Mech. A/Solids 28, 688–696 (2009). https://doi.org/10.1016/j.euromechsol.2009.03.006CrossRef

24.

J. Luo, Z. Li, and Z. Xiao, “On the stress field and crack nucleation behavior of a disclinated nanowire with surface stress effects,” Acta Mech. 225, 3187–3197 (2014). https://doi.org/10.1007/s00707-014-1104-6CrossRef

25.

M. S. Wu, “Energy analysis of Zener–Griffith crack nucleation from a disclination dipole,” Int. J. Plast. 100, 142–155 (2018). https://doi.org/10.1016/j.ijplas.2017.10.001CrossRef

26.

M. Wu, “Crack nucleation from a wedge disclination dipole with shift of rotation axes,” Int. J. Fract. 212, 53–66 (2018). https://doi.org/10.1007/s10704-018-0292-9CrossRef

27.

S. V. Kirikov and V. N. Perevezentsev, “Analysis of the conditions for the existence of stable microcracks in an elastic stress field from a rotational-shear mesodefect,” Lett. Mater. 11, 50–54 (2021). https://doi.org/10.22226/2410-3535-2021-1-50-54CrossRef

28.

S. V. Kirikov, V. N. Perevezentsev, and A. S. Pupynin, “On the effect of external stress on the stability of a crack located near a wedge disclination dipole,” Phys. Met. Metallogr. 122, 820–824 (2021). https://doi.org/10.1134/s0031918x21070036CrossRef

29.

V. N. Perevezentsev, S. V. Kirikov, and N. Yu. Zolotorevskii, “Analysis of the conditions of crack nucleation during lattice dislocations transition through grain boundary,” Mater. Phys. Mech. 49, 173–181 (2022). https://doi.org/10.18149/MPM.4912022_13CrossRef

30.

V. N. Perevezentsev, S. V. Kirikov, and Ju. V. Svirina, “The role of a shear planar mesodefect in the nucleation of a crack at a grain junction due to athermal grain boundary sliding,” Lett. Mater. 11, 467–472 (2021). https://doi.org/10.22226/2410-3535-2021-4-467-472CrossRef

31.

D. Leguillon, “Strength or toughness? A criterion for crack onset at a notch,” Eur. J. Mech. A/Solids 21, 61–72 (2002). https://doi.org/10.1016/s0997-7538(01)01184-6CrossRef

32.

D. Taylor, P. Cornetti, and N. Pugno, “The fracture mechanics of finite crack extension,” Eng. Fract. Mech. 72, 1021–1038 (2005). https://doi.org/10.1016/j.engfracmech.2004.07.001CrossRef

33.

D. Taylor, “The theory of critical distances,” Eng. Fract. Mech. 75, 1696–1705 (2008). https://doi.org/10.1016/j.engfracmech.2007.04.007CrossRef

34.

P. Weißgraeber, D. Leguillon, and W. Becker, “A review of finite fracture mechanics: Crack initiation at singular and non-singular stress raisers,” Arch. Appl. Mech. 86, 375–401 (2016). https://doi.org/10.1007/s00419-015-1091-7CrossRef

35.

O. B. Naimark, “Duality of singularities of multiscale damage localization and crack advance: Length variety in theory of critical distances,” Frattura Integrità Strutturale 13, 272–281 (2019). https://doi.org/10.3221/igf-esis.49.27CrossRef

36.

V. L. Indenbom, “Criteria of fracture in dislocation theories of strength,” Sov. Phys. Solid State 3, 1506 (1961).

37.

D. Leguillon and K. Siruguet, “Finite fracture mechanics—Application to the onset of a crack at a bimaterial corner,” in IUTAM Symposium on Analytical and Computational Fracture Mechanics of Non-Homogeneous Materials, Ed. by B. L. Karihaloo, Solid Mechanics and Its Applications (Springer, Dordrecht, 2002), pp. 11–18. https://doi.org/10.1007/978-94-017-0081-8_2

38.

E. Martin, D. Leguillon, and N. Carrère, “Finite fracture mechanics: A useful tool to analyze cracking mechanisms in composite materials,” in The Structural Integrity of Carbon Fiber Composites, Ed. by P. Beaumont, C. Soutis, and A. Hodzic (Springer, Cham, 2017), pp. 529–548. https://doi.org/10.1007/978-3-319-46120-5_19CrossRef

39.

S. V. Kirikov, A. S. Pupynin, and Yu. V. Svirina, “Analysis of local fields of elastic stress generated by rotational-shear mesodefects near the junctions of grains,” Probl. Prochnosti Plast. 83, 235–244 (2021). https://doi.org/10.32326/1814-9146-2021-83-2-235-244CrossRef

40.

S. Kirikov, V. Perevezentsev, and A. Pupynin, “Effect of junction disclinations on crack nucleation during induced grain boundary sliding,” Deformatsiya Razrushenie Mater., No. 2, 2–11 (2023). https://doi.org/10.31044/1814-4632-2023-2-2-11

Titel: On Crack Initiation Near Stress Sources with Weak Divergences
verfasst von: S. V. Kirikov
V. N. Perevezentsev
A. S. Pupynin
Publikationsdatum: 01.08.2023
Verlag: Pleiades Publishing
Erschienen in: Physics of Metals and Metallography / Ausgabe 8/2023
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X23601257

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2023

Magnetic Properties of Layered Ni/Cu Nanowires

Effect of the Gauge Field on Transfer Phenomena in Conductive Inhomogeneous Magnetic Structures

Evolution of the Structure and Mechanical Properties of Medium-Carbon Microalloyed Steel during High-Temperature Tempering

MD Simulations of Collision Cascades in α-Ti. Cluster Statistics and Governing Mechanisms of Point Defect Cluster Formation

The Influence of Frictional Treatment and Low-Temperature Plasma Carburizing on the Microhardness and Electromagnetic Properties of Metastable Austenitic Steel

Atomistic Modeling of Symmetric and Asymmetric Σ5 Tilt Grain Boundaries in Niobium: Structure, Energy, Point Defects, and Grain-Boundary Self-Diffusion