nach oben

Erschienen in:

2023 | OriginalPaper | Buchkapitel

Optical Methods for Detecting Local Microdefects in Cable Products

verfasst von : Ivan Razuvaev, Evgeny Fedorov, Vitaly Redko

Erschienen in: Emerging Trends in Materials Research and Manufacturing Processes

Verlag: Springer Nature Switzerland

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper addressed the study of feasibility of optical methods to measure the diameter of extended products to perform in-process detection of local microdefects in cable products. The analysis of data on through-transmission methods and the power measurement method showed that the power measurement method is most appropriate for implementation of the microdefect detection device since it enables measuring at the desired frequency. The experimental study confirmed the efficiency of the power measurement method, and revealed a significant drawback of the method, namely, an increased error due to the inhomogeneous distribution of optical flow power when the test object moves through the measurement zone.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel On the Ignition of Forest Areas as a Result of Man-Made and Natural Disasters

Nächstes Kapitel Technology of Gold Extraction from Clay Ore and Technogenic Raw Materials

Alboyaci, B., Aytac, M., Berat, Y., Ince, A.: Elsevier evaluation of the effect of structural defects in the heat-shrink cable terminal on electric field distribution. Eng. Fail. Anal. 132, 105920 (2022)CrossRef

Benidir, A., Flamand, O., Gaillet, L., Dimitriadis, G.: Impact of roughness and circularity-defect on bridges stability. J. Wind Eng. Ind. Aerodyn. 137, 1–13 (2015). https://doi.org/10.1016/j.jweia.2014.11.010CrossRef

Uckol, H., SuatIlhan, A.: Workmanship defect classification in medium voltage cable terminations with convolutional neural network. Electr. Power Syst. Res. 194, 107105 (2021). https://doi.org/10.1016/j.epsr.2021.107105CrossRef

Lysenko, E., Nikolaev, E., Vlasov, V., Surzhikov, A.: Microstructure and reactivity of Fe2O3–Li2CO3–ZnO ferrite system ball-milled in a planetary mill. Thermochim. Acta 664, 100–107 (2018)

Lysenko, E.N., Malyshev, A.V., Vlasov, V.A., Nikolaev, E.V., Surzhikov, A.P.: Microstructure and thermal analysis of lithium ferrite pre-milled in a high-energy ball mill. J. Therm. Anal. Calorim. 134(1), 127–133 (2018)CrossRef

Chen, Y., Hui, B., Cheng, Y., Hao, Y., Fu, M.: Failure investigation of buffer layers in high-voltage XLPE cables. Eng. Fail. Anal. 113, 104546 (2020). https://doi.org/10.1016/j.engfailanal.2020.104546CrossRef

Abbasi, V.: Classifying faults locations in cable terminations and investigation of the faults reasons. Iran. J. Electr. Electron. Eng. 14(3), 270–277 (2018). https://doi.org/10.22068/IJEEE.14.3.270CrossRef

Surzhikov, A.P., Pritulov, A.M., Lysenko, E.N., Sokolovskiy, A.N., Vlasov, V.A., Vasendina, E.A.: Calorimetric investigation of radiation-thermal synthesized lithium pentaferrite. J. Therm. Anal. Calorim. 101(1), 11–13 (2010)CrossRef

Surzhikov, A.P., Peshev, V.V., Pritulov, A.M., Gyngazov, S.A.: Grain-boundary diffusion of oxygen in polycrystalline ferrites. Russ. Phys. J. 42(5), 490–495 (1999)CrossRef

10.

Surzhikov, A.P., Frangulyan, T.S., Ghyngazov, S.A., Lisenko, E.N., Galtseva, O.V.: Physics of magnetic phenomena: investigation of electroconductivity of lithium pentaferrite. Russ. Phys. J. 49(5), 506–510 (2006)CrossRef

11.

Andrade, A.F., Costa, E.G., Andrade, L.M., Soares, S.H., Lira, R.S.: Design of cable termination for AC breakdown voltage tests. Energies 12(16), 3075 (2019). https://doi.org/10.3390/en12163075CrossRef

12.

Starikova, N.S., Redko, V.V., Vavilova, G.V.: Control of cable insulation quality by changing of electrical capacitance per unit during high voltage testing. J. Phys.: Conf. Ser. 671(1), 012056 (2015). https://doi.org/10.1088/1742-6596/671/1/012056CrossRef

13.

Goldshtein, A.E., Vavilova, G.V., Belyankov, V.Y.: An electro-capacitive measuring transducer for the process inspection of the cable capacitance per unit length in the process of production. Russ. J. Nondestr. Test. 51(2), 86–93 (2015). https://doi.org/10.1134/S1061830915020047CrossRef

14.

Zou, X., Mu, H., L. Qu, Zhang, H., Xie, C., Zhang, G.: Localization and assessment of breakage defect in cables based on time–frequency domain reflectometry. Energy Rep. 8(5), 1474–1481 (2022). https://doi.org/10.1016/j.egyr.2022.02.202

15.

Alonso, G., Meseguer, J., Sanz-Andres, A., Valero, E.: On the galloping instability of two-dimensional bodies having elliptical cross-sections. J. Wind Eng. Ind. Aerodyn. 98, 438–448 (2010). https://doi.org/10.1016/j.jweia.2010.02.002CrossRef

16.

Afia, A., Ehtasham, M., Zoltan, T.: Dielectric spectroscopy of low voltage nuclear power cables under simultaneous thermal and mechanical stresses. Energy Rep. 6, 662–667 (2020). https://doi.org/10.1016/j.egyr.2020.11.155CrossRef

17.

Chursin, Y.A., Redko, L.A., Fedorov, E.M: Enlargement of measuring zone in laser gauges without sacrificing measurement accuracy. Meas.: J. Int. Meas. Confed. 131, 647–653 (2019). https://doi.org/10.1016/j.measurement.2018.09.031

18.

Feng, B., Zhang, L., Hou, S., et al.: Research on cable defect location method based on joint time-frequency analysis. In: IEEE International Conference on Electrical Materials and Power Equipment, pp. 1–4 (2021)

19.

Eigner, A., Semino, S.: 50 years of electrical-stress control in cable accessories. IEEE Electr. Insul. Mag. 29(5), 47–55 (2013). https://doi.org/10.1109/MEI.2013.6585856CrossRef

20.

Huang, F.: Cause analysis and countermeasures of a breakdown failure of flexible 110 kV cable terminal. In: E3S Web of Conferences, vol. 38, pp. 2–6 (2018). https://doi.org/10.1051/e3sconf/20183804004

21.

Fedorov, E.M., Koba, A.A.: Three-axis laser method for measuring the diameter of cylindrical objects. Dyn. Syst. Mech. Mach. 7819008 (2016). https://doi.org/10.1109/Dynamics.2016.7819008

22.

Chimunda, S., Nyamupangedengu, C.: A reliability assessment model for an outdoor 88 kV XLPE cable termination. Electr. Power Syst. Res. 177, 105979 (2019). https://doi.org/10.1016/j.epsr.2019.105979CrossRef

23.

Mazzanti, G., Marzinotto, M.: Advanced electro-thermal life and reliability model for high voltage cable systems including accessories. IEEE Electr. Insul. Mag. 33(3), 17–25 (2017). https://doi.org/10.1109/MEI.2017.7906159CrossRef

24.

Fynes-Clinton, D., Nyamupangedengu, C.: Partial discharge characterization of cross-linked polyethylene medium voltage power cable termination defects at very low frequency (0.1 Hz) and power frequency test voltages. IEEE Electr. Insul. Mag. 32(4), 15–23 (2016). https://doi.org/10.1109/MEI.2016.7528986

25.

Linde, E., Verardi, L., Pourmand, P.: Non-destructive condition monitoring of aged ethylene-propylene copolymer cable insulation samples using dielectric spectroscopy and NMR spectroscopy. Polym. Test. 46, 72–78 (2015). https://doi.org/10.1016/j.polymertesting.2015.07.002CrossRef

26.

Zhang, H., Mu, H., Lu, X., Tian, J., Zou, X.: A method for locating and diagnosing cable abrasion based on broadband impedance spectroscopy. Energy Rep. 8, 1492–1499 (2022). https://doi.org/10.1016/j.egyr.2022.03.163CrossRef

Titel: Optical Methods for Detecting Local Microdefects in Cable Products
verfasst von: Ivan Razuvaev
Evgeny Fedorov
Vitaly Redko
Verlag: Springer Nature Switzerland
Buch: Emerging Trends in Materials Research and Manufacturing Processes
Print ISBN: 978-3-031-38963-4

Electronic ISBN: 978-3-031-38964-1

Copyright-Jahr: 2023
DOI: https://doi.org/10.1007/978-3-031-38964-1_3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht