nach oben

Optical and Quantum Electronics

Erschienen in:

01.06.2020

Optimization of laser cleaning conditions using multimode short-pulse radiation

verfasst von: Ya. V. Kravchenko, S. M. Klimentov, S. I. Derzhavin, D. N. Mamonov, N. V. Karpov, A. N. Mayorov

Erschienen in: Optical and Quantum Electronics | Ausgabe 6/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Aiming at significant enhancement of laser cleaning efficiency and productivity, we studied several typical experimental cases including removal of contaminated layers from absorbing surfaces, paying special attention to elimination of the thick rusty layers, and removal of absorbing coatings from transparent substrates. Nanosecond pulses of Nd:YAG laser were used in all the cases at variation of the mode content of the laser beam which was achieved by applying a multimode fiber delivery of radiation. Both, air and water ambient were used in the experiments. The results are discussed in terms of plasma microexplosions in the domain of the substrate–layer interface and the vapor bubbles formation inside the thick rusty layer impregnated with liquid.

Nächster Artikel Intersubband transitions in spherical quantum dot quantum well nanoparticle

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abdel-Kareem, O., Al-Zahrani, A., Khedr, A., et al.: Evaluating the use of laser in analysis and cleaning of the islamic marine archaeological coins excavated from the red sea. Int. J. Conserv. Sci. 7(2), 511–522 (2016)

Al Sekhaneh, W., El Serogy, A., El-Bakri, M.: YAG-laser cleaning of archaeological materials in jordanian museums. Mediterr. Archaeol. Archaeom 15(3), 157–164 (2015). https://doi.org/10.5281/zenodo.19297 CrossRef

Angelini, E., Grassini, S., Olivero, M., et al.: Laser cleaning of metal artifacts: microstructural, chemical and optical fiber-based analysis. In: IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Taipei, Taiwan, May 23–26, Proceedings Paper, pp. 206–210 (2016). https://doi.org/10.1109/I2MTC.2016.7520361

Angelini, E., Di Francia, E., Grassini, S., et al.: Treatments in pulsed laser for the selective removal of corrosion products on metallic artefacts. Metall. Ital. 7–8, 75–78 (2017)

Anisimov, S.I., Lukyanchuk, B.S.: Selected problems of the theory of laser ablation. Uspekhi Fizicheskikh Nauk 45(3), 293–324 (2002). https://doi.org/10.1070/PU2002v045n03ABEH000966 CrossRef

Antonopoulou-Athera, N., Kalathakis, C., Chatzitheodoridis, E., et al.: Theoretical and experimental approach on laser cleaning of coins. SN Appl. Sci. 1, 238–249 (2019). https://doi.org/10.1007/s42452-019-0255-4 CrossRef

Barberio, M., Veltri, S., Stranges, F., et al.: AFM and pulsed laser ablation methods for Cultural Heritage: application to archeometric analysis of stone artifacts. Appl. Phys. A 120, 909–916 (2015). https://doi.org/10.1007/s00339-015-9225-x ADSCrossRef

Biryukov, A.S., Dianov, E.M.: Ultimate intensities of light in silica fibres: stimulated Raman scattering as the main thermal source of optical destruction. Quantum Electron. 30(6), 559–564 (2000). https://doi.org/10.1070/QE2000v030n06ABEH001765 ADSCrossRef

Brech, F., Cross, L.: Optical microemission stimulated by a ruby maser. Appl. Spectrosc. 16, 59–61 (1962)CrossRef

Campbell, S., Blomster, O., Palsson, M.: Comparison of small fibre connectors for high-power transmission. In: Solid State Lasers XIX: Technology and Devices, Proceedings of SPIE-The International Society for Optical Engineering, 7578, 75781R (2010). https://doi.org/10.1117/12.842633

Dey, T., Naughton, D.: Cheap non-toxic non-corrosive method of glass cleaning evaluated by contact angle, AFM, and SEM-EDX measurements. Environ. Sci. Pollut. Res. 24(15), 13373–13383 (2017). https://doi.org/10.1007/s11356-017-8926-4 CrossRef

Garbacz, H., Koss, A., Marczak, J., Mroz, J., Onyszczuk, T., Rycyk, A., Sarzynski, A., Skrzeczanowski, W., Strzelec, M., Zatorska, A.: Optimized laser cleaning of metal artworks—evaluation of determinants. Phys. Procedia 5, 457–466 (2010). https://doi.org/10.1016/j.phpro.2010.08.168 ADSCrossRef

Harada, T., Spence, S., Margiolakis, A., et al.: Obtaining cross-sections of paint layers in cultural artifacts using femtosecond pulsed lasers. Materials 10(2), 107–117 (2017). https://doi.org/10.3390/ma10020107 ADSCrossRef

Klimentov, S.M., et al.: High rate channel ablative formation by picosecond-nanosecond combined laser pulses. Appl. Phys. A 69, S633–S636 (1999). https://doi.org/10.1007/s003390051493 CrossRef

Klimentov, S.M., Konov, V.I.: Optical breakdown in ambient gas and its role in material processing by short-pulsed lasers. In: Veiko, V., Konov, V. (eds.) Fundamentals of Laser-Assisted Micro- and Nanotechnologies. Springer series in materials science, vol. 195. Springer, Cham (2014). https://doi.org/10.1007/978-3-319-05987-7_4 CrossRef

Kono, M., Baldwin, K.G.H., Wain, A.: Treating the untreatable in art and heritage materials: ultrafast laser cleaning of "cloth-of-gold". Langmuir 31(4), 1596–1604 (2015). https://doi.org/10.1021/la504400h CrossRef

Lazzarini, L., Asmus, J., Marchesini, M.L.: Laser for cleaning of statuary, initial results and potentialities. In: 1st International Symposium on the Deterioration of Building Stone, La Rochelle, pp. 89–94 (1972)

Osticioli, I., Siano, S.: Dependence of Nd:YAG laser derusting and passivation of iron artifacts on pulse duration. Proc. SPIE 9065, 906513 (2013). https://doi.org/10.1117/12.2049808 CrossRef

Osticioli, I., Mascalchi, M., Pinna, D., et al.: Removal of Verrucaria nigrescens from Carrara marble artefacts using Nd:YAG lasers: comparison among different pulse durations and wavelengths. Appl. Phys. A 118, 1517–1526 (2015). https://doi.org/10.1007/s00339-014-8933-y ADSCrossRef

Prokuratov, D.S., Davtian, A.S., Vereshchagin, O.S., et al.: Laser cleaning of archaeologically corroded iron objects with inlays. Opt. Quantum Electron. 52, 113 (2020). https://doi.org/10.1007/s11082-020-2231-z CrossRef

Rode, A.V., Baldwin, K.G.H., Wain, A., Madsen, N.R., Freeman, D., Delaporte, Ph, Luther-Davies, B.: Ultrafast laser ablation for restoration of heritage objects. Appl. Surf. Sci. 254, 3137–3146 (2008). https://doi.org/10.1016/j.apsusc.2007.10.106 ADSCrossRef

Samokhin, A.A., Klimentov, S.M., Pivovarov, P.A.: Acoustic diagnostics of the explosive boiling up of a transparent liquid on an absorbing substrate induced by two nanosecond laser pulses. Quantum Electron. 37(10), 967–970 (2007). https://doi.org/10.1070/QE2007v037n10ABEH013625 ADSCrossRef

Samokhin, A.A., Il’ichev, N.N., Klimentov, S.M., et al.: Photoacoustic and laser-induced evaporation effects in liquids. Appl. Phys. B 105, 551–556 (2011). https://doi.org/10.1007/s00340-011-4515-2 ADSCrossRef

Sansonetti, A., Colella, M., Letardi, P., et al.: Laser cleaning of a nineteenth-century bronze sculpture: in situ multi-analytical evaluation. Stud. Conserv. 60–1, S28–S33 (2015). https://doi.org/10.1179/0039363015Z.000000000204 CrossRef

Veiko, V.P., et al.: Laser cleaning of metal surfaces: physical processes and applications. Proc. SPIE (2008). https://doi.org/10.1117/12.786975 CrossRef

Veiko, V.P., Ageev, E.I., Samohvalov, A.: Laser cleaning of engraved rolls coupled with spectroscopic control. Opt. Laser Technol. (2013). https://doi.org/10.1016/j.optlastec.2013.05.015 CrossRef

Xu, J., Wu, C., Zhang, X., et al.: Influence of parameters of a laser cleaning soil rust layer on the surface of ceramic artifacts. Appl. Opt. (2019). https://doi.org/10.1364/AO.58.002725 CrossRef

Yandrisevits, M.A., Londero, P., Carò, F., Rizzo, A., Cappuccini, C.: Wavelength-dependent absorption and scattering effects on laser cleaning of a corroded iron alloy European scale armor. Lasers in the Conservation of Artworks XI: Proc. of LACONA XI, Targowski, P. et al. (eds.) NCU Press, Toruń (2017). https://doi.org/10.12775/3875-4.02

Zanini, A., Bartoli, L.: The laser as a tool for the cleaning of Cultural Heritage. IOP Conf. Ser. Mater. Sci. Eng. 364, 012078 (2018). https://doi.org/10.1088/1757-899X/364/1/012078 CrossRef

Titel: Optimization of laser cleaning conditions using multimode short-pulse radiation
verfasst von: Ya. V. Kravchenko
S. M. Klimentov
S. I. Derzhavin
D. N. Mamonov
N. V. Karpov
A. N. Mayorov
Publikationsdatum: 01.06.2020
Verlag: Springer US
Erschienen in: Optical and Quantum Electronics / Ausgabe 6/2020
Print ISSN: 0306-8919
Elektronische ISSN: 1572-817X
DOI: https://doi.org/10.1007/s11082-020-02399-1

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Nachhaltigkeitsaward Key Visual/© Cometis AG/Global ESG Monitor | Daniel Rupp | Generiert mit KI, Search Icon, Banner Hanser, Jonas Klose/© Pine Valley Capital GmbH, Carina Kießling von der Strategieberatung Roland Berger/© Monika Walther Fotografie | ATZ, Beijing Auto Show 2024: Deutsche Hersteller wollen angreifen./© EKH-Pictures / Generated with AI / Stock.adobe.com, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence 2024/© AndreyPopov / Getty Images / iStock, 2023_Antrieb/© supervisuell, ATZ-Webinar: Prototypenfreie Entwicklung durch Offline- und Driver-in-the-Loop-HiL-Tests /© (c) VI-grade

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 6/2020

InGaAsP/InP single photon avalanche diodes with ultra-high photon detection efficiency

Retraction Note to: Modelling and verification of white light oil immersion microsphere optical nanoscope

An ultra-narrowband all-optical filter based on the resonant cavities in rod-based photonic crystal microstructure

Pump power optimization for hybrid fiber amplifier utilizing second order stimulated Raman scattering

Dirac fermions in asymmetric graphene in electromagnetic field

Manipulation of linear and nonlinear optical properties of GaSb quantum ring in AlGaAs/GaAs/AlGaAs quantum well and AlAs/GaAs/InGaAs/AlAs double quantum well

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.