nach oben

Erschienen in:

2014 | OriginalPaper | Buchkapitel

Optimization of Reciprocating Friction and Wear Test Rig Operating Parameters for Segmented Piston Ring: Liner Assembly

verfasst von : B. M. Sutaria, D. V. Bhatt

Erschienen in: Proceedings of International Conference on Advances in Tribology and Engineering Systems

Verlag: Springer India

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The hydrodynamic mechanism of piston ring-cylinder liner is complex phenomena. It is not easy to predict performance at the design stage. The friction coefficient plays important role for the friction losses in piston ring assembly (PRA) under different operating parameters. The small cross section area of piston ring and its profile decides the friction losses under variation of loads, speeds and operating temperature of different lubricants. In the present work, effects of significant factors on friction coefficient and friction force are analyzed on reciprocating friction and wear test rig (RFWTR) by using Taguchi approach. The Taguchi method (TM) is employed for evaluate the experimental work, analyzed the effect of working parameters for the PRA and decides the influence of optimum parameters. It is found that these parameters have a significant role on PRA performance. The analysis of variance (ANOVA) is performed to identify the statically significant operating parameters. The optimum level of operating parameters is obtained from the analysis. All the parameters have equal contributions in the performance of engine efficiency, friction coefficient etc. Experimental results are provided to validate the suitability of the proposed approach.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Morphology and Friction Characterization of CVD Grown Graphene on Polycrystalline Nickel

Nächstes Kapitel Strengthening Fiber-Matrix Adhesion to Improve Tribo-Performance of Composites

Sorab J, Korcek S (1998) Engine oil and surfaces effect in journal bearing lubrication. SAE 981408, May 1998

Johnson MD, Jensen RK, Korcek S (1997) Base oil effects on friction reduction capabilities of molybdenum dialkyldithiocarbamate containing engine oils. SAE 972860

Dowson D, Economou PN, Ruddy BL, Strachan PJ, Baker AJS (1979) Piston ring lubrication Part-II: Theoretical analysis of a single ring and complete ring pack. In: Proceedings of energy conservation through fluid film lubrication technology: frontier in research and design. ASME, New York, pp 23–52

Hwu CJ, Weng CI (1991) Elastohydrodynamic lubrication of piston rings. Wear 151:203–215

Rohde SM, Whitaker KW, McAllister GT (1990) A mixed friction model for dynamically loaded contacts with application to piston ring lubrication in surface roughness effects in hydrodynamic and mixed lubrications. In: Proceeding of the ASME winter annual meeting, pp 19–50

Patir N, Cheng HS (1978) An average flow model for determining effects of three dimensional roughnesses on partial hydrodynamic lubrication. Trans ASME J Lubric Technol 100:12–17CrossRef

Greenwood JA, Tripp JH (1971) The contact of two nominal flat rough surfaces. Proc Inst Mech Eng 185:625–633

Ting LL (1993) Development of a reciprocating test rig for tribological studies of piston engine moving components. Part-I: Rig design and piston ring friction coefficients measuring method. SAE Paper 930685

Ting LL (1993) Development of a reciprocating test rig for tribological studies of piston engine moving components. Part-II: Rig design and piston ring friction coefficients measuring method. SAE Paper 930686

10.

Dearlove J, Cheng WK (1995) Simultaneous piston ring friction and oil film thickness measurements in reciprocating test rig. SAE Paper 952470

11.

Arcoumanis C, Duszynski M, Flora H, Ostovar P (1995) Development of piston ring lubrication test rig and investigation of boundary conditions for modeling lubrication film properties. SAE Paper 952468

12.

Akalin O, Newaz GM (2001) Piston ring cylinder bore friction modeling in mixed lubrication regime. Part I: Analytical results. Trans ASME J Tribol 123:211–218CrossRef

13.

Akalin O, Newaz GM (2001) Piston ring cylinder bore friction modeling in mixed lubrication regime. Part II: Correlation with bench test data. Trans ASME J Tribol 123:219–223CrossRef

14.

Tung SC, Mcmillan ML, Goa H, Baradasz E (2005) Engine oil effects on friction and Wear using 2.2 L direct injection diesel engine components foe bench testing Part: II—Tribology bench test results and surface analyses. SAE International, 2004-01-2005

15.

Peggy L, Barber G, Zou Q, Anderson JR, Tung SC, Angloe Q (2008) Friction and Wear of low-phosphorus engine oils with additional molybdenum and boron compound, measured on a reciprocating lubricant tester. Tribol Trans 51:659–672CrossRef

16.

Mistry KN, Priest M, Shrestha S (2010) The potential of plasma electrolytic oxidized eutectic aluminium-silicon alloy as a cylinder wall surface for lightweight engine blocks. Proc IMechE J J Eng Tribol 224:221–229

17.

Roy RK (1996) A premier on the Taguchi method. Van Nostrand Reinhold, New York

18.

Roy RK (2001) Design of experiment using the Taguchi approach. Wiely, New York

Titel: Optimization of Reciprocating Friction and Wear Test Rig Operating Parameters for Segmented Piston Ring: Liner Assembly
verfasst von: B. M. Sutaria
D. V. Bhatt
Verlag: Springer India
Buch: Proceedings of International Conference on Advances in Tribology and Engineering Systems
Print ISBN: 978-81-322-1655-1

Electronic ISBN: 978-81-322-1656-8

Copyright-Jahr: 2014
DOI: https://doi.org/10.1007/978-81-322-1656-8_18

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht