nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

17. Parametric Optimization of Micro-electrical Discharge Drilling on Titanium

verfasst von : Siddhartha Kar, Promod Kumar Patowari

Erschienen in: Advances in Micro and Nano Manufacturing and Surface Engineering

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This paper aims to perform an experimental study of drilling micro-holes on titanium grade 2 alloy using micro-electrical discharge machining (µEDM) process. Key process parameters such as capacitance, feed rate (FR) and tool rotation speed (TRS) are varied during machining. Machining time, diameter at entry and diameter at exit are the response measures evaluated to examine the effect of chosen process parameters on them. A Taguchi L-9 orthogonal array design of experiment has been employed to frame the parametric combination of the process parameters, based on which experiments are conducted. Furthermore, analysis of variance (ANOVA) is carried out to find significant process parameters. Deviation of 14.16, 0.03 and 2.14% is observed between the experimental and predicted results at optimum condition of machining time (10⁴ pF, 15 µm/s and 1000 rpm), diameter at entry (10² pF, 5 µm/s and 500 rpm) and diameter at exit (10² pF, 10 µm/s and 1500 rpm), respectively.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Machining of Borosilicate Glass Using Micro-End Milling

Nächstes Kapitel Numerical Simulation of Micro-EDM Process by Incorporating a Novel Approach of Multi-sparks

Qudeiri, J.E.A., Mourad, A.-H.I., Ziout, A., Abidi, M.H., Elkaseer, A.: Electric discharge machining of titanium and its alloys: review. Int. J. Adv. Manuf. Technol. 96(1–4), 1319–1339 (2018). https://doi.org/10.1007/s00170-018-1574-0CrossRef

Kar, S., Patowari, P.K.: Electrode wear phenomenon and its compensation in micro electrical discharge milling: a review. Mater. Manuf. Process. 33(14), 1491–1517 (2018). https://doi.org/10.1080/10426914.2018.1453144CrossRef

Wansheng, Z., Zhenlong, W., Shichun, D., Guanxin, C., Hongyu, W.: Ultrasonic and electric discharge machining to deep and small hole on titanium alloy. J. Mater. Process. Technol. 120(1–3), 101–106 (2002). https://doi.org/10.1016/S0924-0136(01)01149-9CrossRef

Hasçalık, A., Çaydaş, U.: Electrical discharge machining of titanium alloy (Ti–6Al–4 V). Appl. Surf. Sci. 253(22), 9007–9016 (2007). https://doi.org/10.1016/j.apsusc.2007.05.031CrossRef

Pradhan, B.B., Masanta, M., Sarkar, B.R., Bhattacharyya, B.: Investigation of electro-discharge micro-machining of titanium super alloy. Int. J. Adv. Manuf. Technol. 41(11–12), 1094–1106 (2009). https://doi.org/10.1007/s00170-008-1561-yCrossRef

Kibria, G., Sarkar, B.R., Pradhan, B.B., Bhattacharyya, B.: Comparative study of different dielectrics for micro-EDM performance during microhole machining of Ti-6Al-4V alloy. Int. J. Adv. Manuf. Technol. 48(5–8), 557–570 (2010). https://doi.org/10.1007/s00170-009-2298-yCrossRef

Azad, M.S., Puri, A.B.: Simultaneous optimisation of multiple performance characteristics in micro-EDM drilling of titanium alloy. Int. J. Adv. Manuf. Technol. 61(9–12), 1231–1239 (2012). https://doi.org/10.1007/s00170-012-4099-yCrossRef

Meena, V.K., Azad, M.S.: Grey relational analysis of micro-EDM machining of Ti-6Al-4V alloy. Mater. Manuf. Process. 27(9), 973–977 (2012). https://doi.org/10.1080/10426914.2011.610080CrossRef

Kumar, S., Singh, R., Batish, A., Singh, T.P.: Multi-objective parametric optimization using the grey-taguchi approach for powder mixed electric discharge machining of grade-II titanium alloy with cryogenically treated electrodes. Indian J. Eng. Mater. Sci. 24(5), 339–350 (2017)

10.

Baroi, B.K., Kar, S., Patowari, P.K.: Electric discharge machining of titanium grade 2 alloy and its parametric study. Mater. Today: Proc. 5(2), 5004–5011 (2018). https://doi.org/10.1016/j.matpr.2017.12.078CrossRef

11.

Jahan, M.P., Wong, Y.S., Rahman, M.: A study on the quality micro-hole machining of tungsten carbide by micro-EDM process using transistor and RC-type pulse generator. J. Mater. Process. Technol. 209(4), 1706–1716 (2009). https://doi.org/10.1016/j.jmatprotec.2008.04.029CrossRef

Titel: Parametric Optimization of Micro-electrical Discharge Drilling on Titanium
verfasst von: Siddhartha Kar
Promod Kumar Patowari
Verlag: Springer Singapore
Buch: Advances in Micro and Nano Manufacturing and Surface Engineering
Print ISBN: 978-981-329-424-0

Electronic ISBN: 978-981-329-425-7

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-981-32-9425-7_17

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht