nach oben

Steel in Translation

Erschienen in:

01.11.2023

Physical Simulation Modeling as a Tool for Predicting Mechanical Properties of Large-Diameter Pipes: A Review

verfasst von: R. R. Adigamov, V. A. Andreev, S. O. Rogachev, E. S. Fedotov, G. E. Khadeev, V. S. Yusupov

Erschienen in: Steel in Translation | Ausgabe 11/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The review presents analysis of literature sources on the problem of predicting mechanical properties of large-diameter pipes based on the properties of the original hot-rolled sheet. It is shown that methods of physical and simulation modeling make it possible to obtain reliable data on the behavior of pipe steels and their properties without manufacturing pipes and to develop models for calculating and predicting mechanical properties of finished pipes, taking into account the conditions of their production. Models that take into account the Bauschinger effect, which occurs during alternating deformation during pipe processing, have been considered.

Vorheriger Artikel Determination of Deformation Resistance during Rolling

Nächster Artikel Modern Methods Analysis of Longitudinally Welded Pipes Production in the Continuous Forming Mill TESA10-50 (Pipe Electrical Welding Unit) of the Different Types of Configurations

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Klyukvin, M.B., Ordin, V.G., Matrosov, Yu.I., Loskutov, A.Yu., Zinchenko, Yu.A., Kolyasnikova, N.V., Levchenko, V.I., Sagirov, R.I., and Konovalov, G.N., Change in X80 steel plate mechanical properties during pipe manufacture, Metallurgist, 2012, vol. 56, nos. 7–8, pp. 591–596. https://doi.org/10.1007/s11015-012-9620-xCrossRef

Filippov, G.A., Livanova, O.V., Solov’ev, D.M., and Shabalov, I.P., Comparative analysis of the effect of the way of forming on the complex of mechanical propertiesand resistance to fracture of the metal of electric welded pipes of large diameter, Probl. Chern. Metall. Materialoved., 2017, no. 3, pp. 56–65.

Shabalov, I.P., Solov’ev, D.M., Filippov, G.A., and Livanova, O.V., Influence of UO shaping on the mechanical properties of large-diameter electrowelded pipe, Steel Transl., 2015, vol. 45, no. 4, pp. 287–292. https://doi.org/10.3103/s0967091215040129CrossRef

Shabalov, I.P., Solov’ev, D.M., Filippov, G.A., and Livanova, O.V., Influence of 3-roll bending process on the mechanical properties of the metal of large diameter electric-welded pipes, Probl. Chern. Metall. Materialoved., 2015, no. 1, pp. 60–69.

Livanova, O.V., Shabalov, I.P., and Filippov, G.A., Mechanical properties, fracture resistance, and tendency to deformation aging of metal of electric-welded pipes of large diameter at U-shaped press,, 2017, no. 1, pp. 95–101.

Nesterov, G.V., Studenov, E.P., and Gavrilov, D.A., Evaluation of the pipe processing effect on the properties of large diameter metal pipes of strength class K56, Nauka Tekhnol. Truboprovodnogo Transp. Nefti Nefteproduktov, 2017, vol. 7, no. 3, pp. 48–57. https://doi.org/10.28999/2541-9595-2017-7-3-48-57CrossRef

Nesterov, G.V., Gavrilov, D.A., Poshibaev, P.V., and Azarin, A.I., Changes in mechanical properties of sheet metal in the manufacturing process of large diameter pipes for oil pipelines, Mekh. Mash., Mekh. Mater., 2017, no. 4, pp. 56–65.

Samusev, S.V. and Fadeev, V.A., Improvement of method for estimation of parameters of contact interaction of billet with roll tool in lines of continuous electric pipe-welded mills, Chern. Met., 2017, no. 9, pp. 14–19. https://doi.org/10.17580/chm.2021.04.03

Tovmasyan, M.A. and Samusev, S.V., Effect of the nonuniform distribution of the mechanical properties of rolled sheets on the shape of a round billet after forming in making large-diameter pipes, Russ. Metall., 2020, vol. 2020, no. 5, pp. 589–596. https://doi.org/10.1134/s0036029520050158ADSCrossRef

10.

Samusev, S.V. and Fadeev, V.A., Study of the contact interaction of a strip with work rolls during continuous scelping of welded pipes in a TESA line, Chern. Met., 2020, no. 2, pp. 41–46.

11.

Samusev, S.V. and Fadeev, V.A., Continuous shaping of welded straight-seam pipe in the open stands of a pipe-welding system, Steel Transl., 2019, vol. 49, no. 7, pp. 447–453. https://doi.org/10.3103/s0967091219070118CrossRef

12.

Goli-Oglu, E.A., Alistaev, A.N., Gonoshenko, I.V., and Poroshkov, A.V., Influence of alternating cold flexure on the properties of low-alloy pipe steel (strength class K56–K65), Steel Transl., 2014, vol. 44, no. 2, pp. 156–161. https://doi.org/10.3103/s0967091214020053CrossRef

13.

Kolbasnikov, N.G. and Bezobrazov, Yu.A., Finished rolled stretching temperature effect on mechanical properties formation of large diameter pipes, Nauchn.-Tekh. Vedomosti S.-Peterb. Gos. Politekh. Univ., 2014, no. 1, pp. 113–120.

14.

Kudrya, A.V., Sokolovskaya, E.A., Trachenko, V.A., Ning, L.H., Skorodumov, S.V., and Papina, K.B., Measurement of nonuniformity of fracture in structural steels with heterogeneous structure, Met. Sci. Heat Treat., 2015, vol. 57, nos. 3–4, pp. 190–196. https://doi.org/10.1007/s11041-015-9860-zADSCrossRef

15.

Kudrya, A.V., Sokolovskaya, E.A., Salikhov, T.Sh., Ponomareva, M.V., Skorodumov, S.V., and Glu-khov, M.G., Evaluation of nonuniform sheet-steel quality, Steel Transl., 2008, vol. 38, no. 11, pp. 910–916. https://doi.org/10.3103/s0967091208110077CrossRef

16.

Adigamov, R.R., Andreev, V.A., Rogachev, S.O., Fedotov, E.S., Khadeev, G.E., and Yusupov, V.S., Effect of pipe forming on the mechanical properties of large diameter pipes, Russ. Metall., 2023, vol. 2023, no. 4, pp. 498–507. https://doi.org/10.1134/S003602952304002XADSCrossRef

17.

Li, Zh. and Gu, H., Bauschinger effect and residual phase stresses in two ductile-phase steels: Part I. The influence of phase stresses on the Bauschinger effect, Metall. Trans. A, 1990, vol. 21, pp. 717–724. https://doi.org/10.1007/BF02671942CrossRef

18.

Khadeev, G.E., Effect of multi-stage deformation during the pipe processing on mechanical properties of steels strength grade X70-X80, The 8th Int. SteelSim Conf., Toronto: AIST, 2019, pp. 347–357. https://doi.org/10.33313/503/036

19.

Kharitonov, V.A. and Maloletkova, E.O., Impact of the Bauschinger effect on the strength characteristics of high-strength pipes, Obrab. Sploshnykh Sloistykh Mater., 2010, no. 36, pp. 28–33.

20.

Bezobrazov, Yu.A., Kolbasnikov, N.G., and Naumov, A.A., Tension-compression method in the simulation of multistage plastic deformation, Steel Transl., 2014, vol. 44, no. 1, pp. 71–79. https://doi.org/10.3103/S0967091214010057CrossRef

21.

Kolbasnikov, N.G., Zotov, O.G., Martyashov, I.S., and Sulyagin, R.V., The Bauschinger effect and the formation of microalloyed-steel properties in pipe manufacture, Steel Transl., 2012, vol. 42, no. 8, pp. 657–662. https://doi.org/10.3103/s0967091212080049CrossRef

22.

Kostryzhev, A.G., Strangwood, M., and Davis, C.L., Bauschinger effect in Nb and V alloyed line-pipe steels, Ironmaking Steelmaking, 2009, vol. 36, no. 3, pp. 186–192. https://doi.org/10.1179/174328109x401532CrossRef

23.

Han, K., Van Tyne, C.J., and Levy, B.S., Effect of strain and strain rate on the Bauschinger effect response of three different steels, Metall. Mater. Trans. A, 2005, vol. 36, no. 9, pp. 2379–2384. https://doi.org/10.1007/s11661-005-0110-7CrossRef

24.

Adigamov, R.R., Andreev, V.A., Rogachev, S.O., Fedotov, E.S., Khadeev, G.E., and Yusupov, V.S., Bauschinger effect in alternating deformation, Steel Transl., 2022, vol. 52, no. 7, pp. 639–647. https://doi.org/10.3103/S0967091222070026CrossRef

25.

Kostryzhev, A.G., Strangwood, M., and Davis, C.L., Mechanical property development during UOE forming of large diameter pipeline steels, SimPro-08: Proc. 2nd Int. Conf., 2008, pp. 397–407.

26.

Kostryzhev, A.G., Strangwood, M., and Davis, C.L., Bauschinger effect in microalloyed steels: Part I. Dependence on dislocation-particle interaction, Metall. Mater. Trans. A, 2010, vol. 41, no. 6, pp. 1399–1408. https://doi.org/10.1007/s11661-010-0196-4CrossRef

27.

Jiao, J., Lu, C., Lee, C., Bae, J., and Barbaro, F., Introduction of the delta concept for characterising pipe yield strength, Int. J. Mater. Form., 2020, vol. 13, no. 4, pp. 623–637. https://doi.org/10.1007/s12289-019-01501-7CrossRef

28.

Jiao, J., Lu, C., Linton, V., and Barbaro, F., The effects of operational, testing, and material characterizations on the change in yield strength from plate to pipe, J. Pressure Vessel Technol., 2021, vol. 143, no. 4, p. 041504. https://doi.org/10.1115/1.4049986CrossRef

29.

Kim, J., Kang, S.-C., Kim, J.-K., and Song, J., Yield strength estimation of X65 and X70 steel pipe with relatively low t/D ratio, Steel Compos. Struct., 2021, vol. 38, no. 2, pp. 151–164.

30.

Cooreman, S., Thibaux, P., and Liebeherr, M., Prediction of mechanical properties on large diameter welded pipes through advanced constitutive modelling, J. Phys.: Conf. Ser., 2018, vol. 1063, p. 012043. https://doi.org/10.1088/1742-6596/1063/1/012043CrossRef

31.

Zou, T., Li, D., Wu, G., and Peng, Yi., Yield strength development from high strength steel plate to UOE pipe, Mater. Des., 2016, vol. 89, pp. 1107–1122. https://doi.org/10.1016/j.matdes.2015.10.095CrossRef

32.

Moon, J., Jeong, H.J., Joo, S.-H., Sohn, S.S., Kim, K.-S., Lee, S., and Kim, H.S., Simulation of pipe-manufacturing processes using sheet bending-flattening, Exp. Mech., 2018, vol. 58, no. 6, pp. 909–918. https://doi.org/10.1007/s11340-018-0397-0CrossRef

33.

Zhang, W., Ding, D., and Gu, M., A model for predicting the yield strength difference between pipe and plate of low-carbon microalloyed steel, Metall. Mater. Trans. A, 2012, vol. 43, no. 13, pp. 5308–5315. https://doi.org/10.1007/s11661-012-1336-9CrossRef

34.

Kostryzhev, A.G., Bauschinger effect in Nb and V microalloyed line pipe steels, PhD Thesis, Birmingham: Univ. of Birmingham, 2009.

35.

Kudrya, A.V., Moskalenko, V.A., Gryzunov, V.I., Sokolovskaya, E.A., and Ivashchenko, A.V., Using the databases of production inspection for managing the product quality, Elektrometallurgiya, 2000, no. 12, pp. 34–37.

36.

Mentyukov, K.Yu., Bortsov, A.N., Velichko, A.A., and Sychev, O.N., Predicting the mechanical properties of the base metal at producing longitudinally welded pipes of large diameter, Probl. Chern. Metall. Materialoved., 2016, no. 4, pp. 59–67.

37.

Mentyukov, K.Yu., Effect of chemical and deformation treatment on the mechanical properties of 17Kh18N9 and 01Kh17N13M3 steels, Cand. Sci. (Eng.) Dissertation, Moscow: 2017.

38.

Mentyukov, K.Yu., Bortsov, A.N., and Goroshko, T.V., Anisotropy of mechanical properties and sensitivity of mechanical properties to deformation aging of base metal of high-strength thick-walled pipes, Probl. Chern. Metall. Materialoved., 2015, no. 2, pp. 57–65.

39.

Mentyukov, K.Yu., Bortsov, A.N., Shabalov, I.P., and Mansyrev, E.I., Study of the properties of the base metal of large-diameter pipes under alternating loading, Metallurgist, 2016, vol. 60, nos. 3–4, pp. 397–404. https://doi.org/10.1007/s11015-016-0305-8CrossRef

40.

Efron, L.I., Metallovedenie v bol’shoi metallurgii. Trubnye stali (Metal Science in Large-Scale Metallurgy: Pipe Steels), Moscow: Metallurgiya, 2012.

Titel: Physical Simulation Modeling as a Tool for Predicting Mechanical Properties of Large-Diameter Pipes: A Review
verfasst von: R. R. Adigamov
V. A. Andreev
S. O. Rogachev
E. S. Fedotov
G. E. Khadeev
V. S. Yusupov
Publikationsdatum: 01.11.2023
Verlag: Pleiades Publishing
Erschienen in: Steel in Translation / Ausgabe 11/2023
Print ISSN: 0967-0912
Elektronische ISSN: 1935-0988
DOI: https://doi.org/10.3103/S0967091223110025

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2023

Inhibiting Composition Against Steel Corrosion in Model Formation Waters of Oil and Gas Fields

Study of Changes in the Shape of a Pipe Blank Taking into Account the Peculiarities of Contact Interaction with a Deforming Tool during JCOE Molding in the TESA 1420 Line

Practical Solutions to Eliminate Vibration Effects Occurring on Rolling Mill Equipment

Features of Vanadium Doping of Fe–30Cr–20Co Powder Hard Magnetic Alloy

Study of Negative Vibration Effects (Chatter) during Cold Rolling at Mill 2030 NLMP

Analysis of Energy and Technological Parameters of Carbothermic Ferroalloy Smelting with Increased Power of Electric Furnaces

Premium Partner

Marktübersichten