nach oben

Metallurgist

Erschienen in:

09.03.2024

Plasma Electrolytic Oxidation of Aluminum-Calcium Binary Alloys in a Cast Condition

verfasst von: N. V. Letyagin, T. К. Akopyan, A. A. Sokorev, A. G. Tsydenov

Erschienen in: Metallurgist | Ausgabe 9-10/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this work specimens of binary Al–Ca alloys containing 1, 3, 6 wt.% Ca are produced in a cast condition. The effect of the calcium content on coating structure and properties formed by plasma electrolytic oxidation is studied. The coatings obtained are studied by microstructural analysis, X-ray diffraction, and microhardness is determined by the Vickers method. There is an increase in coating thickness with an increase in alloy calcium content. Coating internal porosity increases with increasing amount of Ca in Al. According to element distribution maps and graphs over the cross section there is an inner layer characterized by almost uniform distribution of aluminum and oxygen, while the outer layer contains an extensive silicon and calcium region. In addition, calcium content in the outer layer of a coating increases in proportion to its content within the alloy. Results of X-ray phase analysis reveal α -Al₂O₃, γ-Al₂O₃ and a certain proportion of amorphous phase within a coating composition. An increase in calcium content in the alloy leads to a significant change in phase composition of a coating (α-Al₂O₃/g-Al₂O₃), preventing formation of α -Al₂O₃. The change in phase composition and suppression of α -Al₂O₃ phase formation contributes to a significant reduction in coating average microhardness from 970 HV formed on Al1Ca alloy to 744 HV for a coating formed on Al6Ca alloy. Using the example of binary aluminum-calcium alloys Al1Ca (28 HV), Al3Ca (36 HV), Al6Ca (56 HV) in the as-cast state, the possibility of a significant increase in surface hardness up to 512–1197 HV due to the formation of coatings by plasma electrolytic oxidation is demonstrated.

Vorheriger Artikel Process of Sintering Iron-Based Powder Materials Alloyed with Copper with Introduction of Various Plasticizers Into an Initial Charge

Nächster Artikel Structure and Properties of Welded Joints of High-Strength Steels Made by Metal-Cored Wire with Nitrogen

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

N. A. Belov, E. A. Naumova, and T. K. Akopyan, Eutectic Alloys Based upon Aluminum: New Alloy Systems [in Russian] Ruda i Metally, Moscow (2016).

P. K. Shurkin, N. A. Belov, A. F. Musin, and M. E. Samoshina, “Effect of calcium and silicon on the character of solidification and strengthening of the Al–8%Zn–3%Mg alloy,” Physics of Metals and Metallography, 121, No. 2, 135–142 (2020); DOI:https://doi.org/10.1134/S0031918X20020155.CrossRef

P. K. Shurkin, N. A. Belov, A. F. Musin, and A. A. Aksenov, “Novel high-strength casting Al–Zn–Mg–Ca–Fe aluminum alloy without heat treatment,” Russian J. of Non-Ferrous Metals, 61, 179–187 (2020); DOI: https://doi.org/10.3103/S1067821220020121.CrossRef

T. K. Akopyan, N. V. Letyagin, and N. N. Avxentieva, “Hightech alloys based on Al–Ca–La(–Mn) eutectic system for casting, metal forming and selective laser melting,” Non-Ferrous Metals, No. 1, 52–59 (2020); DOI: https://doi.org/10.17580/nfm.2020.01.09.CrossRef

T. K. Akopyan, N. V. Letyaginm T. A. Sviridova, N. O. Korotkova, and A. S. Prosviryakov, “ New casting alloys based on the Al+Al4(Ca,La) eutectic,” JOM, 72, 3779–3786 (2020); DOI: https://doi.org/10.1007/s11837-020-04340-z.

N. A. Belov, E. A. Naumova, V. D. Ilyukhin, and V. V. Doroshenko, “Structure and mechanical properties of Al–6%Ca–1%Fe alloy foundry goods, obtained by die casting,” Tsvetnye Metally, No. 3, 69–75 (2017); DOI: https://doi.org/10.17580/tsm.2017.03.11.CrossRef

D. Fokin, S. Matveev, R. Vakhromov, and A. Alabin, “ Effect of alloying elements on strength properties and casting properties of corrosion resistant quench-free Al–Ca Alloys,” Light Metals, 113–118 (2022).

N. V. Letyagin, A. F. Musin, and L. S. Sichev, “New aluminium-calcium casting alloys based on secondary raw materials,” Materials Today: Proceedings, 38, 1551–1555 (2021); DOI: https://doi.org/10.1016/j.matpr.2020.08.148.CrossRef

P. K. Shurkin, N. V. Letyagin, A. I. Yakushkova, M. E. Samoshina, D. Yu. Ozherelkov, and T. K. Akopyan, “Remarkable thermal stability of the Al–Ca–Ni–Mn alloy manufactured by laser powder bed fusion,” Mater. Lett., 285, 129074 (2021); DOI: https://doi.org/10.1016/j.matlet.2020.129074.CrossRef

10.

N. A. Belov, E. A. Naumova, T. K. Akopyan, and V. V. Doroshenko, “Phase diagram of Al–Ca–Mg–Si system and its application for the design of aluminum alloys with high magnesium Content,” Metals, 7, 429 (2017); DOI:https://doi.org/10.3390/met7100429.CrossRef

11.

O. V. Volkova, A. V. Dub, A. G. Rakoch, A. A. Gladkova, and M. E. Samoshina, “Comparison of pitting corrosion tendency for castings made of Al6Ca, Al1Fe, Al6Ca1Fe experimental alloys and AK12M2 industrial alloy,” Izvestiya Vuzov. Tsvetnaya Metallurgiya, No. 5, 75–81 (2017); DOI: https://doi.org/10.17073/0021-3438-2017-5-75-81.CrossRef

12.

Y. Li, A. Hu, Y. Fu, S. Liu, W. Shen, H. Hu, and X. Nie, “Al alloys and casting processes for induction motor applications in batterypowered electric vehicles: a rev.,” Metals, 12, 216 (2022); DOI: https://doi.org/10.3390/met12020216.CrossRef

13.

D. Ashkenazi, “ How aluminum changed the world: A metallurgical revolution through technological and cultural perspectives,” Technological Forecasting and Social Change, 143, 101–113 (2019); DOI: https://doi.org/10.1016/j.techfore.2019.03.011.CrossRef

14.

A. T. Kermanidis, “Aircraft aluminum alloys: Applications and future trends,” in: Revolutionizing Aircraft Materials and Processes (2020); DOI: 14 https://doi.org/10.1007/978-3-030-35346-9_2.

15.

A. G. Rakoch, A. A. Gladkova, and A. V. Dub, Plasma Electrolytic Treatment of Aluminum and Titanium Alloys [in Russian] Publ. MISiS (2017).

16.

L. Zhu, Z. Guo, Y. Zhang, Z. Li, and M. Sui, “A mechanism for the growth of a plasma electrolytic oxide coating on Al,” Electrochim. Acta, 208, 296–303 (2016); DOI: https://doi.org/10.1016/j.electacta.2016.04.186.CrossRef

17.

A. E. Gulec, Y. Gencer, and M. Tarakci, “The characterization of oxide based ceramic coating synthesized on Al–Si binary alloys by microarc oxidation,” Surf. Coat. Technol., 269, 100–107 (2015); DOI: https://doi.org/10.1016/j.surfcoat.2014.12.031.CrossRef

18.

K. A. Cosan, K. O. Gunduz, M. Tarakci, and Y. Gencer, “Plasma electrolytic oxidation of as-cast and heat-treated binary Al–Ni alloys,” Surf. Coat. Technol., 450, 128998 (2020); DOI: https://doi.org/10.1016/j.surfcoat.2022.128998.CrossRef

19.

S. Cengiz, “Synthesis of eutectic Al–18Ce alloy and effect of cerium on the PEO coating growth,” Mater. Chem. Phys., 247, 122897 (2020); DOI: 10.1016/j.matchemphys.2020.122897.CrossRef

20.

S. Cengiz, M. Tarakci, Y. Gencer, A. O. Devecili, and Y. Azakli, “Oxide based ceramic coating on Al–4Cu alloy by microarc oxidation,” Acta Physica Polonica A, 123, 445–448 (2013); DOI: https://doi.org/10.12693/APhysPolA.123.445.

21.

Y. Gencer and A. E. Gulec, “The effect of Zn on the microarc oxidation coating behavior of synthetic Al–Zn binary alloys,” J. Alloys Compd., 525, 159–165 (2012); DOI: https://doi.org/10.1016/j.jallcom.2012.02.094.CrossRef

22.

Z. C. Oter, Y. Gencer, and M. Tarakci, “The characterization of the coating formed by Microarc oxidation on binary Al–Mn alloys,” J. Alloys Compd., 650, 185–192 (2015); DOI: https://doi.org/10.1016/j.jallcom.2015.06.080.CrossRef

23.

M. Tarakci, “Plasma electrolytic oxidation coating of synthetic Al–Mg binary alloys,” Mater. Charact., 62, 1214–1221 (2011); DOI: https://doi.org/10.1016/j.matchar.2011.10.010.CrossRef

24.

T. Wu, C. Blawerta, and M. L. Zheludkevich, “Influence of secondary phases of AlSi9Cu3 alloy on the plasma electrolytic oxidation coating formation process,” J. Mater. Sci. Technol., 50, 75–85 (2020); DOI: https://doi.org/10.1016/j.jmst.2019.12.031.CrossRef

25.

A. B. Rogov, H. Lyu, A. Matthews, and A. Yerokhin, “AC plasma electrolytic oxidation of additively manufactured and cast AlSi12 alloys,” Surf. Coat. Technol., 399, 126116 (2020); DOI: https://doi.org/10.1016/j.surfcoat.2020.126116.CrossRef

26.

K. Li, W. Li, G. Zhang, W. Zhu, F. Zheng, D. Zhang, and M. Wang, “Effects of Si phase refinement on the plasma electrolytic oxidation of eutectic Al–Si alloy,” J. Alloys Compd., 790, 650–656 (2019); DOI: https://doi.org/10.1016/j.jallcom.2019.03.217.CrossRef

27.

N. V. Letyagin, A. A. Sokorev, V. N. Kokarev, A. S. Shatrov, A. G. Tsydenov, A. S. Finogeev, A. F. Musin, and M. I. Petrzhik, “The comparative characteristics of the structure and functional properties of coatings formed on aluminum alloys 2xxx and 7xxx series by the method of plasma electrolytic oxidation,” Phys. Met. Metallogr., 124, No. 2, 238–244 (2023); DOI: https://doi.org/10.1134/S0031918X23700138.CrossRef

28.

Y.-J. Oh, J.-I. Mun, and J.-H. Kim, “ Effects of alloying elements on microstructure and protective properties of Al₂O₃ coatings formed on aluminum alloy substrates by plasma electrolysis,” Surf. Coat. Technol., 204, 141–148 (2009); DOI: https://doi.org/10.1016/j.surfcoat.2009.07.002.CrossRef

29.

L. Pezzato, M. Dabala, S. Gross, and K. Brunelli, “Effect of microstructure and porosity of AlSi10Mg alloy produced by selective laser melting on the corrosion properties of plasma electrolytic oxidation coatings,” Surf. Coat. Technol., 404, 126477 (2020); DOI: https://doi.org/10.1016/j.surfcoat.2020.126477.CrossRef

30.

C. Liu, Q. Wang, X. Cao, L. Cha, R. Ye, and C. S. Ramachandran, “Significance of plasma electrolytic oxidation treatment on corrosion and sliding wear performances of selective laser melted AlSi10Mg alloy,” Mater Charact., 181, 111479 (2021); DOI: https://doi.org/10.1016/j.matchar.2021.111479.CrossRef

Titel: Plasma Electrolytic Oxidation of Aluminum-Calcium Binary Alloys in a Cast Condition
verfasst von: N. V. Letyagin
T. К. Akopyan
A. A. Sokorev
A. G. Tsydenov
Publikationsdatum: 09.03.2024
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 9-10/2024
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-024-01624-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9-10/2024

Formation Characteristics of Damascene Structure of a 17th Century Persian Saber Shamshir

Choice of a Sorbent for Copper and Cobalt Sorption from Gold-Containing Heap Leaching Solutions

Ecological Aspects of Integrated Technology for Processing Lithium-Cobalt Batteries with the Production of Pelletized Target Products

Structure and Properties of Coatings Formed on Cast Al–Ca Alloys by Plasma Electrolytic Oxidation

Effect of NaCl in Surrounding Atmosphere on Oxidation Rate of HBI

Separation of Oily Mill Scale Into Components

Premium Partner

Marktübersichten