nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

Polylactic Acid Green Nanocomposites for Automotive Applications

verfasst von : Reza Arjmandi, Azman Hassan, Zainoha Zakaria

Erschienen in: Green Biocomposites

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In the past decade, a growing interest in the use of green nanocomposites in industrial applications has been observed because of many advantages such as biodegradability, renewability and their relatively low cost to substitute the conventional petroleum-based polymers. The nanocomposites based on polylactic acid (PLA) have the potential to be used in automotive applications due to good mechanical properties and processability. This chapter highlights the recent developments on PLA nanocomposites as potential materials for automotive applications. One of the common methods to improve the performances of PLA is the combination of PLA with various nanofillers including layered silicates and carbon derivatives such as graphene and carbon nanotubes. Mechanical and thermal properties are the focus of this chapter as the properties are important for automotive applications. Further research in this area is also being proposed.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Green Biocomposites: A Prospective Utilization in Automobile Industry

Nächstes Kapitel Bamboo Fiber-Polymer Composites: Overview of Fabrications, Mechanical Characterizations and Applications

Achmad F, Yamane K, Quan S, Kokugan T (2009) Synthesis of polylactic acid by direct polycondensation under vacuum without catalysts, solvents and initiators. Chem Eng J 151(1):342–350CrossRef

Anderson KS, Schreck KM, Hillmyer MA (2008) Toughening polylactide. Polym Rev 48(1):85–108CrossRef

Ang PK, Jaiswal M, Lim CHYX, Wang Y, Sankaran J, Li A et al (2010) A bioelectronic platform using a graphene − lipid bilayer interface. ACS Nano 4(12):7387–7394CrossRef

Arjmandi R, Hassan A, Haafiz MM, Zakaria Z, Inuwa IM (2014) Characterization of polylactic acid/microcrystalline cellulose/montmorillonite hybrid composites. Malays J Anal Sci 18:642–650

Arjmandi R, Hassan A, Eichhorn SJ, Haafiz MM, Zakaria Z, Tanjung FA (2015a) Enhanced ductility and tensile properties of hybrid montmorillonite/cellulose nanowhiskers reinforced polylactic acid nanocomposites. J Mater Sci 50(8):3118–3130CrossRef

Arjmandi R, Hassan A, Haafiz MM, Zakaria Z (2015b) Effect of microcrystalline cellulose on biodegradability, tensile and morphological properties of montmorillonite reinforced polylactic acid nanocomposites. Fiber Polym 16(10):2284–2293CrossRef

Arjmandi R, Hassan A, Haafiz MM, Zakaria Z (2015c) Tensile and morphological properties of hybrid montmorillonite/microcrystalline cellulose filled polylactic acid composites: effect of filler ratio. Adv Mater Res 1125:271–275CrossRef

Arjmandi R, Hassan A, Majeed K, Zakaria Z (2015d) Rice husk filled polymer composites. Int J Polym Sci 2015:1–32CrossRef

Arjmandi R, Hassan A, Haafiz MM, Zakaria Z (2016) Effects of micro-and nano-cellulose on tensile and morphological properties of montmorillonite nanoclay reinforced polylactic acid nanocomposites. In: Nanoclay reinforced polymer composites. Springer, Singapore, pp 103–125

Auras RA, Lim LT, Selke SE, Tsuji H (2011). Poly (lactic acid): synthesis, structures, properties, processing, and applications, vol 10. Wiley, Hoboken

Avella M, Buzarovska A, Errico ME, Gentile G, Grozdanov A (2009) Eco-challenges of bio-based polymer composites. Materials 2(3):911–925CrossRef

Balakrishnan H, Masoumi I, Yussuf AA, Imran M, Hassan A, Wahit MU (2012) Ethylene copolymer toughened polylactic acid nanocomposites. Polym Plast Technol 51(1):19–27CrossRef

Barrau S, Vanmansart C, Moreau M, Addad A, Stoclet G, Lefebvre JM, Seguela R (2011) Crystallization behavior of carbon nanotube-polylactide nanocomposites. Macromolecules 44(16):6496–6502CrossRef

Bourbigot S, Fontaine G, Gallos A, Bellayer S (2011) Reactive extrusion of PLA and of PLA/carbon nanotubes nanocomposite: processing, characterization and flame retardancy. Polym Advan Technol 22(1):30–37CrossRef

Breuer O, Sundararaj U (2004) Big returns from small fibers: a review of polymer/carbon nanotube composites. Polym Compos 25(6):630–645CrossRef

Cao Y, Feng J, Wu P (2010) Preparation of organically dispersible graphene nanosheet powders through a lyophilization method and their poly (lactic acid) composites. Carbon 48(13):3834–3839CrossRef

Chang JH, An YU, Sur GS (2003a) Poly (lactic acid) nanocomposites with various organoclays. I. Thermomechanical properties, morphology, and gas permeability. J Polym Sci Pol Phys 41(1):94–103CrossRef

Chang JH, An YU, Cho D, Giannelis EP (2003b) Poly (lactic acid) nanocomposites: comparison of their properties with montmorillonite and synthetic mica (II). Polymer 44(13):3715–3720CrossRef

Coleman JN, Khan U, Blau WJ, Gun’ko YK (2006) Small but strong: a review of the mechanical properties of carbon nanotube–polymer composites. Carbon 44(9):1624–1652CrossRef

Compton OC, Nguyen ST (2010) Graphene oxide, highly reduced graphene oxide, and graphene: versatile building blocks for carbon-based materials. Small 6(6):711–723CrossRef

Cote LJ, Kim F, Huang J (2008) Langmuir − Blodgett assembly of graphite oxide single layers. J Am Chem Soc 131(3):1043–1049CrossRef

Davies G (2012) Materials for automobile bodies. Butterworth-Heinemann, Oxford

Di Y, Iannace S, Maio ED, Nicolais L (2005) Poly (lactic acid)/organoclay nanocomposites: thermal, rheological properties and foam processing. J Polym Sci Pol Phys 43(6):689–698CrossRef

Drumright RE, Gruber PR, Henton DE (2000) Polylactic acid technology. Adv Mater 12(23):1841–1846CrossRef

Dubois P, Murariu M (2008) The green challenge: high-performance PLA (nano) composites. JEC Compos 45:66–69

Endo M, Strano MS, Ajayan PM (2007) Potential applications of carbon nanotubes. In: Carbon nanotubes. Springer, Berlin, pp 13–62

Fowler PA, Hughes JM, Elias RM (2006) Biocomposites: technology, environmental credentials and market forces. J Sci Food Agr 86(12):1781–1789CrossRef

Garlotta D (2001) A literature review of poly (lactic acid). J Polym Environ 9(2):63–84CrossRef

Goenka S, Sant V, Sant S (2014) Graphene-based nanomaterials for drug delivery and tissue engineering. J Control Release 173:75–88CrossRef

Goffin AL, Duquesne E, Moins S, Alexandre M, Dubois P (2007) New organic–inorganic nanohybrids via ring opening polymerization of (di) lactones initiated by functionalized polyhedral oligomeric silsesquioxane. Eur Polym J 43(10):4103–4113CrossRef

Gorrasi G, Milone C, Piperopoulos E, Lanza M, Sorrentino A (2013) Hybrid clay mineral-carbon nanotube-PLA nanocomposite films. Preparation and photodegradation effect on their mechanical, thermal and electrical properties. Appl Clay Sci 71:49–54CrossRef

Hasan SA, Rigueur JL, Harl RR, Krejci AJ, Gonzalo-Juan I, Rogers BR, Dickerson JH (2010) Transferable graphene oxide films with tunable microstructures. ACS Nano 4(12):7367–7372CrossRef

Hasan M, Hassan A, Zakaria Z (2016) Poly(lactic acid) hybrid green composites. In: Kalia S (ed) Biodegradable green composites, 1st edn. ©2016 John Wiley & Sons, Inc. Published 2016 by John Wiley & Sons, Inc.

He YN, Guo K, Chen JZ, Niu MJ, Wang WJ, Li XF (2011) Preparation and characterization of poly (lactic acid)/montmorillonite nanocomposites via a masterbatching method. Adv Mater Res 335:1493–1498CrossRef

Herrmann AS, Nickel J, Riedel U (1998) Construction materials based upon biologically renewable resources—from components to finished parts. Polym Degrad Stabil 59(1):251–261CrossRef

Heyrovska R (2008) Atomic structures of graphene, benzene and methane with bond lengths as sums of the single, double and resonance bond radii of carbon. Cornell University Library, USA

Hong J, Kim DS (2013) Preparation and physical properties of polylactide/cellulose nanowhisker/nanoclay composites. Polym Compos 34(2):293–298CrossRef

Hsieh CT, Chen WY (2011) Water/oil repellency and work of adhesion of liquid droplets on graphene oxide and graphene surfaces. Surf Coat Tech 205(19):4554–4561CrossRef

Huang SM, Hwang JJ, Liu HJ, Lin LH (2010) Crystallization behavior of poly (L-lactic acid)/montmorillonite nanocomposites. J Appl Polym Sci 117(1):434–442

Khalil HA, Bhat IUH, Jawaid M, Zaidon A, Hermawan D, Hadi YS (2012) Bamboo fibre reinforced biocomposites: a review. Mater Des 42:353–368CrossRef

Kim IH, Jeong YG (2010) Polylactide/exfoliated graphite nanocomposites with enhanced thermal stability, mechanical modulus, and electrical conductivity. J Polym Sci Pol Phys 48(8):850–858CrossRef

Kim HS, Chae YS, Kwon HI, Yoon JS (2009) Thermal degradation behaviour of multi-walled carbon nanotube-reinforced poly (L-lactide) nanocomposites. Polym Int 58(7):826–831CrossRef

Koronis G, Silva A, Fontul M (2013) Green composites: a review of adequate materials for automotive applications. Compos Part B Eng 44(1):120–127CrossRef

Kuan CF, Chen CH, Kuan HC, Lin KC, Chiang CL, Peng HC (2008a) Multi-walled carbon nanotube reinforced poly (L-lactic acid) nanocomposites enhanced by water-crosslinking reaction. J Phys Chem Solids 69(5):1399–1402CrossRef

Kuan CF, Kuan HC, Ma CCM, Chen CH (2008b) Mechanical and electrical properties of multi-wall carbon nanotube/poly (lactic acid) composites. J Phys Chem Solids 69(5):1395–1398CrossRef

Lai SM, Wu SH, Lin GG, Don TM (2014) Unusual mechanical properties of melt-blended poly (lactic acid) (PLA)/clay nanocomposites. Eur Polym J 52:193–206CrossRef

Lee JH, Park TG, Park HS, Lee DS, Lee YK, Yoon SC, Nam JD (2003) Thermal and mechanical characteristics of poly (L-lactic acid) nanocomposite scaffold. Biomaterials 24(16):2773–2778CrossRef

Li Y, Ren PG, Zhang Q, Shen TT, Ci JH, Fang CQ (2013) Properties of poly (lactic acid)/organo-montmorillonite nanocomposites prepared by solution intercalation. J Macromol Sci B 52(8):1041–1055CrossRef

Li W, Xu Z, Chen L, Shan M, Tian X, Yang C et al (2014) A facile method to produce graphene oxide-g-poly (L-lactic acid) as an promising reinforcement for PLLA nanocomposites. Chem Eng J 237:291–299CrossRef

Lim LT, Auras R, Rubino M (2008) Processing technologies for poly (lactic acid). Prog Polym Sci 33(8):820–852CrossRef

Maruschke M (2016) Latest generation of PLA. http://www.plastics.gl/exhibit/latest-generation-of-pla/. Accessed 27 Aug 2016

McLauchlin AR, Thomas NL (2009) Preparation and thermal characterisation of poly (lactic acid) nanocomposites prepared from organoclays based on an amphoteric surfactant. Polym Degrad Stabil 94(5):868–872CrossRef

Meng QK, Hetzer M, De Kee D (2010) PLA/clay/wood nanocomposites: nanoclay effects on mechanical and thermal properties. J Compos Mater 45(10):1145–1158

Moon SI, Jin F, Lee CJ, Tsutsumi S, Hyon SH (2005) Novel carbon nanotube/poly (L-lactic nanocomposites; their modulus, thermal stability, and electrical conductivity. Macromol. Symp. 224(1):287–296 WILEY‐VCHCrossRef

Murariu M, Da Silva Ferreira A, Alexandre M, Dubois P (2008) Polylactide (PLA) designed with desired end-use properties: 1. PLA compositions with low molecular weight ester-like plasticizers and related performances. Polym Advan Technol 19(6):636–646CrossRef

Murariu M, Dechief AL, Bonnaud L, Paint Y, Gallos A, Fontaine G et al (2010) The production and properties of polylactide composites filled with expanded graphite. Polym Degrad Stabil 95(5):889–900CrossRef

Murariu M, Doumbia A, Bonnaud L, Dechief AL, Paint Y, Ferreira M et al (2011) High-performance polylactide/ZnO nanocomposites designed for films and fibers with special end-use properties. Biomacromolecules 12(5):1762–1771CrossRef

Nam JY, Sinha Ray S, Okamoto M (2003) Crystallization behavior and morphology of biodegradable polylactide/layered silicate nanocomposite. Macromolecules 36(19):7126–7131CrossRef

Nampoothiri KM, Nair NR, John RP (2010) An overview of the recent developments in polylactide (PLA) research. Bioresource Technol 101(22):8493–8501CrossRef

Netravali AN, Chabba S (2003) Composites get greener. Mater Today 6(4):22–29CrossRef

Norazlina H, Kamal Y (2015) Graphene modifications in polylactic acid nanocomposites: a review. Polym Bull 72(4):931–961CrossRef

Notta-Cuvier D, Odent J, Delille R, Murariu M, Lauro F, Raquez JM et al (2014) Tailoring polylactide (PLA) properties for automotive applications: effect of addition of designed additives on main mechanical properties. Polym Test 36:1–9CrossRef

Notta-Cuvier D, Murariu M, Odent J, Delille R, Bouzouita A, Raquez JM et al (2015) Tailoring polylactide properties for automotive applications: effects of co-addition of halloysite nanotubes and selected plasticizer. Macromol Mater Eng 300(7):684–698CrossRef

Olewnik E, Richert J (2014) Effect of the compatibilizing agent on the structure, mechanical and thermal properties of polylactide filled with modified and unmodified montmorillonite. Polym Compos 35(7):1330–1337CrossRef

Paredes JI, Villar-Rodil S, Martínez-Alonso A, Tascon JMD (2008) Graphene oxide dispersions in organic solvents. Langmuir 24(19):10560–10564CrossRef

Petersson L, Oksman K (2006) Biopolymer based nanocomposites: comparing layered silicates and microcrystalline cellulose as nanoreinforcement. Compos Sci Technol 66(13):2187–2196CrossRef

Ramontja J, Ray SS, Pillai SK, Luyt AS (2009) High-Performance carbon nanotube-reinforced bioplastic. Macromol Mater Eng 294(12):839–846CrossRef

Raquez JM, Habibi Y, Murariu M, Dubois P (2013) Polylactide (PLA)-based nanocomposites. Prog Polym Sci 38(10):1504–1542CrossRef

Roy N, Sengupta R, Bhowmick AK (2012) Modifications of carbon for polymer composites and nanocomposites. Prog Polym Sci 37(6):781–819CrossRef

Ryoo SR, Kim YK, Kim MH, Min DH (2010) Behaviors of NIH-3T3 fibroblasts on graphene/carbon nanotubes: proliferation, focal adhesion, and gene transfection studies. ACS Nano 4(11):6587–6598CrossRef

Sabatini V, Farina H, Basilissi L, Silvestro GD, Ortenzi MA (2015) The use of epoxy silanes on montmorillonite: an effective way to improve thermal and rheological properties of PLA/MMT nanocomposites obtained via in situ polymerization. J Nanomater 16(1):213. doi:10.1155/2015/418418

Santangelo S, Gorrasi G, Di Lieto R, De Pasquale S, Patimo G, Piperopoulos E et al (2011) Polylactide and carbon nanotubes/smectite-clay nanocomposites: preparation, characterization, sorptive and electrical properties. Appl Clay Sci 53(2):188–194CrossRef

Shyang CW, Kuen LS (2008) Organo-montmorillonite nanocomposites. Polym Polym Compos 16(4):263–270

Sinha Ray S, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28(11):1539–1641CrossRef

Sinha Ray S, Yamada K, Okamoto M, Ueda K (2002) Polylactide-layered silicate nanocomposite: a novel biodegradable material. Nano Lett 2(10):1093–1096CrossRef

Song W, Zheng Z, Tang W, Wang X (2007) A facile approach to covalently functionalized carbon nanotubes with biocompatible polymer. Polymer 48(13):3658–3663CrossRef

Sun X, Liu Z, Welsher K, Robinson JT, Goodwin A, Zaric S, Dai H (2008) Nano-graphene oxide for cellular imaging and drug delivery. Nano Res 1(3):203–212CrossRef

Treacy MJ, Ebbesen TW, Gibson JM (1996) Exceptionally high Young’s modulus observed for individual carbon nanotubes

Villmow T, Pötschke P, Pegel S, Häussler L, Kretzschmar B (2008) Influence of twin-screw extrusion conditions on the dispersion of multi-walled carbon nanotubes in a poly (lactic acid) matrix. Polymer 49(16):3500–3509CrossRef

Vink ET, Rabago KR, Glassner DA, Gruber PR (2003) Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production. Polym Degrad Stabil 80(3):403–419CrossRef

Wang H, Qiu Z (2011) Crystallization behaviours biodegradable poly (L-lactic acid)/graphene oxide nanocomposites from the amorphous state. Thermochim Acta 526:229–236CrossRef

Wu CS (2009) Renewable resource-based composites of recycled natural fibers and maleated polylactide bioplastic: characterization and biodegradability. Polym Degrad Stabil 94(7):1076–1084CrossRef

Wu D, Wu L, Zhang M, Zhao Y (2008) Viscoelasticity and thermal stability of polylactide composites with various functionalized carbon nanotubes. Polym Degrad Stabil 93(8):1577–1584CrossRef

Wu D, Wu L, Zhou W, Zhang M, Yang T (2010) Crystallization and biodegradation of polylactide/carbon nanotube composites. Polym Eng Sci 50(9):1721–1733CrossRef

Xie XL, Mai YW, Zhou XP (2005) Dispersion and alignment of carbon nanotubes in polymer matrix: a review. Mater Sci Eng-R Reports 49(4):89–112CrossRef

Yang ST, Chang Y, Wang H, Liu G, Chen S, Wang Y et al (2010) Folding/aggregation of graphene oxide and its application in Cu²⁺ removal. J Colloid Interf Sci 351(1):122–127CrossRef

Yang JH, Lin SH, Lee YD (2012) Preparation and characterization of poly (l-lactide)–graphene composites using the in situ ring-opening polymerization of PLLA with graphene as the initiator. J Mater Chem 22(21):10805–10815CrossRef

Young RJ, Kinloch IA, Gong L, Novoselov KS (2012) The mechanics of graphene nanocomposites: a review. Compos Sci Technol 72(12):1459–1476CrossRef

Zhang HB, Zheng WG, Yan Q, Yang Y, Wang JW, Lu ZH et al (2010) Electrically conductive polyethylene terephthalate/graphene nanocomposites prepared by melt compounding. Polymer 51(5):1191–1196CrossRef

Zhu Y, Murali S, Cai W, Li X, Suk JW, Potts JR, Ruoff RS (2010) Graphene and graphene oxide: synthesis, properties, and applications. Adv Mater 22(35):3906–3924CrossRef

Titel: Polylactic Acid Green Nanocomposites for Automotive Applications
verfasst von: Reza Arjmandi
Azman Hassan
Zainoha Zakaria
Verlag: Springer International Publishing
Buch: Green Biocomposites
Print ISBN: 978-3-319-49381-7

Electronic ISBN: 978-3-319-49382-4

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-3-319-49382-4_9