Ausgabe 4/2023
Inhalt (36 Artikel)
Main Components Composing Domestic Epoxy Glues (Review). Part I
A. P. Petrova, A. Yu. Isaev, O. I. Smirnov, A. S. Emel’yanov
Main Components of Domestic Epoxy Adhesives (Review). Part II. Plasticizers and Elasticizers for Epoxy Adhesives
A. P. Petrova, A. Yu. Isaev, O. I. Smirnov, A. S. Emel’yanov
Studying the Rheokinetics of Curing Processes in Epoxy Amine Binders Modified with Carding Polysulfon
S. V. Polunin, I. Yu. Gorbunova, M. L. Kerber, E. V. Khokhlova, I. A. Kryuchkov, T. P. Kravchenko
Deformation Properties of an Elastic Adhesive in Glue Joints under Quasi-Static Low-Cycle Mechanical Loads
V. G. Tsverava, M. Yu. Rusin, A. V. Terekhin, D. V. Alekseev, P. Yu. Yakushkin
Calculating the Load-Bearing Capacity of Prestressed Wooden Beams
E. G. Khitrov, A. R. Birman, S. A. Ugryumov, V. V. Orlov, I. S. Frolov, O. N. Kovaleva
Modern Phenolic Adhesives for Aviation and Engineering. Part 2. Chemical Modification
D. A. Aronovich, A. P. Petrova
The Effect of the Structure of Heterocyclic Monomers on the Heat Resistance of Epoxy Adhesives
V. F. Stroganov, E. A. Vdovin, I. V. Stroganov
Properties of Polymers Obtained by the Mechanism of Anionic Polymerization of Epoxy Resins under the Action of Imidazoles
M. S. Fedoseev, L. F. Derzhavinskaya
Methodological Aspects of Determining Fiber—Matrix Adhesive Strength by Pushing out Monofilament with an Indenter
A. I. Gulyaev, S. V. Sbitneva, D. V. Zaitsev, P. N. Medvedev
The Influence of the Content of Halogen-Containing Oligomer in the Composition of VSK-14-6 Adhesive Binder on the Kinetics of the Curing Process of Prepregs on Different Fillers and a Comparative Analysis of the Curing Kinetics of Prepregs Based on VSK-14-1 Adhesive Binder
N. V. Antyufeeva, A. I. Starkov
Mechanism of Cumene Oxidation into Cumene Hydroperoxide (Curing Initiator for Acrylic Adhesives) in the Presence of Ca, Sr, Ba Chloride Complex with Dibenzo-18-Crown-6 Ether
N. A. Novikov, N. V. Ulitin, Ya. L. Lyulinskaya, D. A. Shiyan, K. A. Tereshchenko, N. M. Nurullina, M. N. Denisova, Kh. E. Kharlampidi, O. V. Stoyanov
Determination of Viscoelastic Characteristics of Epoxy–Sand Composites Used in Repair of Road Machinery
T. N. Egunova, N. I. Baurova, I. S. Nefelov
A Study of the Structure and Thermodynamic Properties of Polyvinyl Acetate Dispersion after Microwave Electromagnetic Treatment
S. P. Isaev, O. Yu. Erenkov, D. O. Yavorskii, E. A. Kulikova
Study of the Kinetics of the Interaction Process of Material of “Liquid” Phase and Epoxy Binder
E. A. Kosenko, V. A. Nelyub, N. I. Baurova
Kinetic Modeling of Synthesis of Cumene Hydroperoxide (a Curing Initiator for Acrylic Glues) in the Presence of Mg, Ca, Sr, or Ba 2-Ethylhexanoate as a Catalyst
N. V. Ulitin, N. A. Novikov, K. A. Tereshchenko, D. A. Shiyan, Ya. L. Lyulinskaya, N. M. Nurullina, M. N. Denisova, O. V. Stoyanov, Kh. E. Kharlampidi
Adhesive Materials Based on Copolymers of Sodium 2-Acrylamido-2-Methylpropane Sulfonate
L. B. Yakimtsova, Ya. K. Martinkevich, E. T. Krut’ko
The Influence of Loading Conditions under Mechanical Impact on Polymer Composite Materials
A. M. Gubin, I. N. Gulyaev
Film Formers Based on Plant Raw Materials for Polyurethane Coatings: A Review
A. A. Kozlova, T. M. Rakova, D. S. Derkov
A Study of the Influence of Negative Temperatures on the Impact Strength of a Carbon-Fiber Composite with a Hybrid Matrix
E. A. Kosenko, N. I. Baurova, V. A. Zorin
Application of Various Brands of Silica Fillers in the Formulation of Treads of Car Tires
A. Yu. Lyushtyk, S. N. Kayushnikov, Zh. S. Shashok, E. P. Uss, E. V. Fedulova, Yu. V. Grabko, O. V. Stoyanov
The Effect of Liquid Viscosity on Aerosol Parameters upon Ultrasonic Spraying
R. I. Nigmetzyanov, S. K. Sundukov, A. V. Sukhov, V. M. Prikhod’ko, D. S. Fatyukhin
Some Aspects of the Generalized Energy Approach to the Processes of Destruction of Materials
M. I. Sidorov, M. E. Stavrovskii, I. N. Kravchenko, A. V. Ragutkin, D. I. Petrovskii
A Study of the Character of the Effect of an Organophosphorus Acid on the Physicochemical Characteristics of Block Copoly(sulfone arylate)s
A. Kh. Shaov, A. M. Kharaev, R. Ch. Bazheva, R. A. Kharaeva
Evaluation of Uniformity of Particle Distribution in Composite Materials Based on Molded Polyurethanes
R. A. Alekhina, S. P. Tuzhilin, A. S. Sviridov, Yu. A. Goncharova
A Study of the Influence of Bis-Maleimides on the Properties of Oligoestermaleinates
V. A. Danilov, O. A. Kolyamshin, A. N. Vasil’ev, N. E. Temnikova, M. V. Kolpakova, O. V. Stoyanov
Estimating the Fuel Permeability of Thermoplastic Polyurethane from the Saturated Vapor Pressure of Kerosene
D. V. Kolotilin, E. A. Manzhelii, D. O. Shchepilov, A. V. Dedov, V. F. Danilov
A Melamine Polyphosphate-Filled Thermoprotective Coating Based on Polyetherurethane Rubber and Chlorinated Epoxy Oligomers
O. I. Sidorov, V. A. Pilchenko, T. V. Bochkova, A. A. Shalaev, D. V. Zhesterev, D. V. Pleshakov, M. I. Buzin
Stability in Supersonic Flow of Complex-Shaped Composites Based on Reinforced Inorganic and Cold-Curing Hybrid Binders
V. M. Lalayan, E. V. Stegno, N. A. Abramova, A. M. Rytsarev, A. Yu. Shaulov, A. A. Berlin
Prediction of Electrophysical Properties of Organic-Inorganic Composite Materials
L. V. Gorobinskii, N. Yu. Lysov, A. L. Panin, A. A. Panov, A. V. Polyudchenkov, M. A. Kravchenko, V. I. Zhun’
Influence of Machining Modes and Negative Temperature on the Static Bending Strength of Carbon Fiber Reinforced Plastics
I. S. Bolotnikov, E. A. Kosenko, P. E. Demin
A Study of the Properties of Mineral, Chemical, and Vegetable Fibers
P. A. Medvedev, A. N. Blaznov, I. V. Cheremukhina, Z. G. Sakoshev, G. S. Zadvornykh, E. G. Sakoshev, V. V. Firsov