nach oben

Metal Science and Heat Treatment

Erschienen in:

11.05.2016

Possibility of Prediction of Properties of High-Toughness Materials by Complex Analysis of the Size of Zones of Plastic Strain and Other Parameters of Steel 09G2S

verfasst von: M. Yu. Simonov, G. S. Shaimanov, Yu. N. Simonov, A. M. Khanov

Erschienen in: Metal Science and Heat Treatment | Ausgabe 1-2/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Relations between the parameters of dynamic crack resistance, impact toughness, sizes of zones of plastic strain in the start region, hardness of the unstrained material, strength characteristics, and tempering temperature of steel 09G2S are determined. The linear regression equations are used to construct mathematical and graphical models for predicting the level of properties in quenched and tempered steel 09G2S. The method is used to predict the properties of a tubular billet from steel 09G2S with composition somewhat different from the rated one after quenching and high tempering at 570°C.

Vorheriger Artikel Comparative Analysis of Zones of Plastic Strain, Dynamic Crack Resistance, Structure and Micromechanisms of Crack Propagation in Structural Steels 09G2S, 25 and 40 in High-Toughness Condition

Nächster Artikel Complex Deformation and Thermochemical Treatment of System-Alloyed Low-Carbon Steel 10Kh3G3MF

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M. N. Georgiev, Yu. N. Simonov, and M. Yu. Simonov, “Effect of crack length and side notches on implementation of plane strain conditions under impact loading,” Zavod. Lab. Diagn. Mater., 76(9), 56 – 58 (2016).

M. N. Georgiev,M. Yu. Simonov, and Yu. N. Simonov, “Evaluation of fracture energy of impact specimens with side notches,” Zavod. Lab. Diagn. Mater., 78(9), 56 – 61 (2012).

G. V. Klevtsov, Plastic Zones and Diagnostics of Fracture of Metallic Materials [in Russian], MISiS, Moscow (1999), 112 p.

G. R. Irvin, “Analysis of stresses near a crack to the crack extension force,” J. Appl. Mech., 24(3), 361 – 363 (1957).

M. Yu. Simonov, M. N. Georgiev, Yu. N. Simonov, and G. S. Shaimanov, “Estimation of the sizes of plastic strain zone of high-toughness materials after dynamic tests by the method of systematic measurement of microhardness,” Metalloved. Term. Obrab. Met., No. 11, 40 – 45 (2012).

G. V. Klevstov and G. B. Shvets, X-ray Analysis as a Method for Studying Fractures [in Russian], Mashinostroenie, Leningrad (1986), Issue 35, pp. 3 – 11.

E-Wen Huang, Soo Yeol Lee, Wanchuck Woo, and Kuan-Wei Lee, “Three-orthogonal-direction stress mapping around a fatigue-crack tip using neutron diffraction,” The Minerals, Metals & Mater. Soc. and ASM Int. (2011), DOI: 10.1007/s11661-011-0904-8.

Luke N. Brewer, David P. Field, and Colin C. Merriman, “Mapping and assessing plastic deformation using EBSD,” in: Electron Backscatter Diffraction in Mater. Sci. (2009), pp. 251 – 262; DOI: 10.1007/978-0-387-88136-2 18.

Helena Jin, Wei-Yang Lu, Sandip Haldar, and Hugh A. Bruck, “Microscale characterization of granular deformation near a crack tip,” J. Mater. Sci., 46(20), 6596 – 6602 (2011).CrossRef

10.

G. O. Neil, The Hardness of Metals and Its Measurement [in Russian], Metallurgizdat, Moscow – Leningrad (1940), 376 p.

11.

D. Tabor, The Hardness of Metals, Clarendon Press, London (1951), 171 p.

12.

I. N. Tylevich, “Determination of mechanical properties of shipbuilding materials by indentation,” Proceeding of the Central Research Institute of Shipbuilding Technology [in Russian], Sudpromgiz, Leningrad (1959), XXIII, 94 p.

13.

M. P. Markovets, “About the relation between hardness and other mechanical properties of metals,” in: Research in the Field of Hardness Measurement, Proceeding of USSR Institutes of Metrology [in Russian], Izd. Standartov, Moscow – Leningrad (1967), Issue 91(151), 76 p.

14.

M. A. Baranov, V. M. Shcherbakov, E. V. Chernykh, and V. V. Romanenko, “Application of the method of discrete atomic modeling to prediction of mechanical properties of alloys of austenitic class,” Polzunovsky Almanakh, No. 1, 183 – 187 (2010).

15.

M. A. Baranov and V. M. Shcherbakov, “Correlation of the mechanical properties of steels and austenitic alloys with the parameters of status variables of the crystal lattice,” Electr. Physicotekh. Zh., 5, 2 – 6 (2010).

16.

Yu. I. Gustov, A. A. Pyatnitskii, and I. O. Makhov, “Identification of mechanical properties of building constructions, machines, and equipment,” in: Interstroymekh 2014, Mater. Int. Sci.-Eng. Conf. [in Russian], Samara (2014), pp. 203 – 207.

17.

Yu. N. Simonov, M. Yu. Simonov, D. O. Panov, A. V. Kasatkin, and D. P. Poduzov, “A method for evaluating the impact toughness of high-toughness sheet structural steels, RF Patent 2485476, MPK G 01 n 3/30, Patentee Perm National Research Polytechnic University, No. 2012100595,” Byull. Izobr. Polezn. Modeli, No. 17 (2013), Appl. 10.01.2012, Publ. 20.06.2013.

18.

Yu. N. Simonov, M. Yu. Simonov, G. S. Shaimanov, and L. E. Makarova, “A method for determining plastic strain zone under a fracture in a specimen, RF Patent 2516392, MPK G 01 n 3/28, Patentee Perm National Research Polytechnic University, No. 2012153101/28,” Byull. Izobr. Polezn. Modeli, No. 14 (2014), Appl. 07.12.2012, Publ. 20.05.2014.

19.

M. N. Georgiev, Yu. N. Simonov, M. Ya. Mezhova, and V. N. Minaev, “Structural aspects of cyclic crack resistance of quenched and tempered steels,” Fiz. Khim. Mekhan. Mater., 21(5), 48 – 53 (1085).

20.

Yu. N. Simonov, A. S. Pertsev, D. O. Panov, and A. I. Smirnov, “”Thermomechanical treatment of structural low-carbon steel 09G2S,” Sovr. Probl. Nauki Obraz., No. 6 (2013).

Titel: Possibility of Prediction of Properties of High-Toughness Materials by Complex Analysis of the Size of Zones of Plastic Strain and Other Parameters of Steel 09G2S
verfasst von: M. Yu. Simonov
G. S. Shaimanov
Yu. N. Simonov
A. M. Khanov
Publikationsdatum: 11.05.2016
Verlag: Springer US
Erschienen in: Metal Science and Heat Treatment / Ausgabe 1-2/2016
Print ISSN: 0026-0673
Elektronische ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-016-9971-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2016

Ordering in Gold-Base Alloys for Low-Level Slide Contacts

Structural Engineering of Vacuum-ARC Multiperiod Coatings

Causes of Formation and Ways of Elimination of Defects on the Internal Surface of Upset Tube Ends

Deformation and Fracture of Low-Carbon Martensitic Steels

Complex Deformation and Thermochemical Treatment of System-Alloyed Low-Carbon Steel 10Kh3G3MF

Functional Metallic Materials with Fragmented Structure and Developed Surface

Premium Partner

Marktübersichten