nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.05.2012

Preliminary Investigation on Brazing Performance of Ti/Ti and Ti/Steel Joints Using Copper Film Deposited by PVD Technique

verfasst von: A. Elrefaey, L. Wojarski, W. Tillmann

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 5/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Microstructural aspects and bonding characteristics of vacuum brazed Ti/Ti and Ti/steel were investigated. A thin-copper film, with different thicknesses, was deposited on the brazed metals by physical vapor deposition technique to serve as a brazing filler metal. Test joints were processed at a temperature of 910 °C and 15 min holding time. The resultant joints were characterized to determine the brittle intermetallic compound in the interfacial layer and the shear strength of the joints were tested. Our preliminary experimental results showed that sound joints with a good wetting quality, lack of pores and cracks can be achieved. Intermetallic phases such as Ti₂Cu, TiCu, FeTi, and Fe₂Ti were predicted from the chemical analyses. The Ti/Ti joints achieved a higher shear strength than the Ti/steel joints and there is a tendency for the tension shear strength to increase when a thick Cu-deposited layer is used.

Vorheriger Artikel Effect of Ti, Nb, and Ti + Nb Coatings on the Bond Strength-Structure Relationship in Al/Al2O3 Joints

Nächster Artikel Processing of Carbon Fibers Reinforced Mg Matrix Composites Via Pre-infiltration with Al

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

“ASM Handbook, Alloy Phase Diagrams,” ASM International, 10th ed., 1992, p 2–205

V.A. Sidyakin, D.K. Pechenkin, V.M. Arbuzov, and V.S. Khaustov, Butt Welding of Steel-Titanium Pipe Transition Pieces, Weld. Int., 2004, 18(12), p 977–981CrossRef

B. Qin, G.M. Sheng, J.W. Huang, B. Zhou, S.Y. Qiu, and C. Li, Phase Transformation Diffusion Bonding of Titanium Alloy With Stainless Steel, Mater. Charact., 2006, 56(1), p 32–38CrossRef

B. Kurt, N. Orhan, E. Evin, and A. Çalik, Diffusion Bonding Between Ti-6Al-4V Alloy and Ferritic Stainless Steel, Mater. Lett., 2007, 61, p 1747–1750CrossRef

H. Lee, J. Yoon, C.H. Park, Y.G. Ko, D.H. Shin, and C.S. Lee, A Study on Diffusion Bonding of Superplastic Ti–6Al–4V ELI, Grade, J. Mater. Process. Technol., 2007, 187–188, p 526–529CrossRef

A. Elrefaey and W. Tillmann, Solid State Diffusion Bonding of Titanium to Steel Using a Copper Interlayer, J. Mater. Process. Technol., 2009, 209(5), p 2746–2752CrossRef

O. Smorygo, J.S. Kim, M.D. Kim, and T.G. Eom, Evolution of Interlayer Microstructure and the Fracture Modes of the Zirconia/Cu-Ag-Ti Filler/Ti Active Brazing Joints, Mater. Lett., 2006, 61, p 613–616CrossRef

P. Knepper and D. Lohwasser, High-Temperature Brazing of Titanium Structures, DVS-Berichte, 2001, 208, p 83–88

C.C. Liu, C.L. Ou, and R.K. Shiue, The Microstructural Observation and Wettability Study of Brazing Ti-6Al-4V and 304 Stainless Steel Using Three Braze Alloys, J. Mater. Sci., 2002, 37(12), p 2225–2235CrossRef

10.

X. Huang and N.L. Richards, Activated Diffusion Brazing Technology for Manufacture of Titanium Honeycomb Structures, Weld. J., 2004, 83(3), p 73–81

11.

S. Kundu, M. Ghosh, A. Laik, K. Bhanumurthy, G.B. Kale, and S. Chatterjee, Diffusion Bonding of Commercially Pure Titanium to 304 Stainless Steel Using Copper Interlayer, Mater. Sci. Eng. A, 2005, 407(1–2), p 154–160

12.

A. Elrefaey and W. Tillmann, Correlation Between Microstructure, Mechanical Properties, and Brazing Temperature of Steel to Titanium Joint, J. Alloys Compd., 2009, 487(1–2), p 639–645CrossRef

13.

W. Tillmann, A.M. Osmanda, and L. Wojarski, Diffusion Brazing of Al-Alloys for Hybrid Structures, Q. J. Jpn. Weld. Soc., 2009, 27(2), p 179–182CrossRef

14.

H.D. Steffens, J. Wilden, and K. Möhwald, Utilization of Ion Plated Diffusion Barriers and Brazing Alloys for Steel/Titanium-and Steel/Aluminium-Joints, International Conference on Brazing, High Temperature Brazing and Diffusion Welding, Aachen, Germany, June 27–29, 1995, p 94–98 (in German)

15.

J. Harvey, P.G. Partridge, and C.L. Snooke, Diffusion Bonding and Testing of AI-Alloy Lap Shear Test Pieces, J. Mater. Sci., 1985, 20(3), p 1009–1014CrossRef

16.

W. Jiang, J. Gong, H. Chen, and S.T. Tu, The Effect of Filler Metal Thickness on Residual Stress and Creep for Stainless-Steel Plate-Fin Structure, Int. J. Press. Vessels Pip., 2008, 85(8), p 569–574CrossRef

17.

L.M. Gammon, R.D. Briggs, J.M. Packard, K.W. Batson, R. Boyer, and C.W. Domby, Metallography and Microstructures of Titanium and Its Alloys, Metallography and Microstructures, ASM Handbook, Vol 9, G.F. Vander Voort, Ed., ASM International, 2004, p 899–917

18.

Materials Science International Team MSIT^®, Y. Jialin, J. De Keyzer, O. Kubaschewski, R. Schmid-Fetzer, O. Shcherban, V. Tomashik, and L. Tretyachenko, Ag-Cu-Ti (Silver-Copper-Titanium). G. Effenberg and S. Ilyenko, Eds., Springer Materials—The Landolt-Börnstein Database http://www.springermaterials.com. doi:10.1007/10916070_15

19.

J.A. Van Beek, A.A. Kodentsov, and F.J.J. Van Loo, Phase Equilibria in the Cu-Fe-Ti System at 1123 K, J. Alloys Compd., 1995, 217(1), p 97–103CrossRef

Titel: Preliminary Investigation on Brazing Performance of Ti/Ti and Ti/Steel Joints Using Copper Film Deposited by PVD Technique
verfasst von: A. Elrefaey
L. Wojarski
W. Tillmann
Publikationsdatum: 01.05.2012
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 5/2012
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-012-0121-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2012

Fatigue Assessment of Defect-Free and Defect-Containing Brazed Steel Joints

Effect of pH of Sulfate Solution on Electrochemical Behavior of Pb-Free Solder Candidates of SnZn and SnZnCu Systems

Microstructure of Reaction Zone Formed During Diffusion Bonding of TiAl with Ni/Al Multilayer

Investigation of Mechanical Properties of Galvanized Automotive Sheets Joined by Resistance Spot Welding

Microwave Ignited Combustion Synthesis as a Joining Technique for Dissimilar Materials

Non-destructive Real Time Monitoring of the Laser Welding Process

Premium Partner

Marktübersichten