nach oben

Journal of Materials Science

Erschienen in:

12.11.2018 | Energy materials

Preparing enhanced electrochemical performances Fe₂O₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials by thermal decomposition of iron citrate

verfasst von: Yike Lei, Yonghu Li, Hongyu Jiang, Chunyan Lai

Erschienen in: Journal of Materials Science | Ausgabe 5/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The Fe₂O₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ (NCM111-Fe) was successfully prepared via a co-precipitation reaction assisted by thermal decomposition of iron citrate. The crystal structure, morphologies and element condition of the samples were researched by XRD, SEM, TEM and XPS. The NCM111 was covered with Fe₂O₃-layer after thermal decomposition of iron citrate, and the existence of Fe₂O₃ layer did not change the pristine crystal structure of NCM111. Between 3.0 and 4.8 V, the NCM111-Fe delivered an initial capacity of 192.5 mA h g⁻¹ at 0.1 C and 86.7% of the capacity remained after 100 cycles. In contrast, NCM111 exhibited an initial capacity of 187 mA h g⁻¹ and only remained 63.5% after 100 cycles. The results indicated that the NCM111-Fe displayed weaker polarization, smaller charge-transfer resistance and better electrochemistry performance than the pristine sample.

Vorheriger Artikel Direct laser writing of graphene films from a polyether ether ketone precursor

Nächster Artikel One-pot co-precipitation synthesis of Fe3O4 nanoparticles embedded in 3D carbonaceous matrix as anode for lithium ion batteries

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ilango PR, Subburaj T, Prasanna K, Jo YN, Lee CW (2015) Physical and electrochemical performance of LiNi_1/3Co_1/3Mn_1/3O₂ cathodes coated by Sb₂O₃ using a sol–gel process. Mater Chem Phys 158:45–51. https://doi.org/10.1016/j.matchemphys.2015.03.033 CrossRef

Yao Y, Liu H, Li G, Peng H, Chen K (2013) Synthesis and electrochemical performance of phosphate-coated porous LiNi_1/3Co_1/3Mn_1/3O₂ cathode material for lithium ion batteries. Electrochim Acta 113:340–345. https://doi.org/10.1016/j.electacta.2013.09.071 CrossRef

Huang Z, Wang Z, Zheng X, Guo H, Li X, Jing Q, Yang Z (2015) Effect of Mg doping on the structural and electrochemical performance of LiNi_0.6Co_0.2Mn_0.2O₂ cathode materials. Electrochim Acta 182:795–802. https://doi.org/10.1016/j.electacta.2015.09.151 CrossRef

Wang C, Chen L, Zhang H, Yang Y, Wang F, Yin F, Yang G (2014) Li₂ZrO₃ coated LiNi_1/3Co_1/3Mn_1/3O₂ for high performance cathode material in lithium batteries. Electrochim Acta 119:236–242. https://doi.org/10.1016/j.electacta.2013.12.038 CrossRef

Ding Y, Zhang P, Gao D (2008) Synthesis and electrochemical properties of layered Li[Ni_1/3Co_1/3Mn_1/3]_0.96Ti_0.04O_1.96F_0.04 as cathode material for lithium-ion batteries. J Alloys Compd 456:344–347. https://doi.org/10.1016/j.jallcom.2007.02.074 CrossRef

Liang Y, Wen K, Mao Y, Liu Z, Zhu G, Yang F, He W (2015) Shape and size control of LiFePO₄ for high-performance lithium-ion batteries. ChemElectroChem 2:1227–1237. https://doi.org/10.1002/celc.201500114 CrossRef

Lv W, Niu Y, Jian X, Zhang K, Wang W, Zhao J, Wang Z, Yang W, He W (2016) Space matters: Li⁺ conduction versus strain effect at FePO₄/LiFePO₄ interface. Appl Phys Lett 108:083901. https://doi.org/10.1063/1.4942849 CrossRef

Wang Z, Liu L, Chen L, Huang X (2002) Structural and electrochemical characterizations of surface-modified LiCoO₂ cathode materials for Li-ion batteries. Solid State Ion 148:335–342. https://doi.org/10.1016/S0167-2738(02)00071-1 CrossRef

Qiu Q, Huang X, Chen Y, Tan Y, Lv W (2014) Al₂O₃ coated LiNi_1/3Co_1/3Mn_1/3O₂ cathode material by sol–gel method: preparation and characterization. Ceram Int 40:10511–10516. https://doi.org/10.1016/j.ceramint.2014.03.023 CrossRef

10.

Lin Y, Lu C (2009) Preparation and electrochemical properties of layer-structured LiNi_1/3Co_1/3Mn_1/3−yAl_yO₂. J Power Sources 189:353–358. https://doi.org/10.1016/j.jpowsour.2008.08.072 CrossRef

11.

Lu M, Han E, Zhu L, Chen S, Zhang G (2016) The effects of Ti⁴⁺–Fe³⁺ co-doping on Li[Ni_1/3Co_1/3Mn_1/3]O₂. Solid State Ion 298:9–14. https://doi.org/10.1016/j.ssi.2016.10.014 CrossRef

12.

Baboo JP, Park H, Song J, Kim S, Jo J, Pham DT, Mathew V, Xiu Z, Kim J (2017) Facile redox synthesis of layered LiNi_1/3Co_1/3Mn_1/3O₂ for rechargeable Li-ion batteries. Electrochim Acta 224:243–250. https://doi.org/10.1016/j.electacta.2016.12.050 CrossRef

13.

Wang L, Ma Y, Qu Y, Cheng X, Zuo P, Du C, Gao Y, Yin G (2016) Influence of fluoroethylene carbonate as co-solvent on the high-voltage performance of LiNi_1/3Co_1/3Mn_1/3O₂ cathode for lithium-ion batteries. Electrochim Acta 191:8–15. https://doi.org/10.1016/j.electacta.2016.01.032 CrossRef

14.

Liu X, Li H, Li D, Ishida M, Zhou H (2013) PEDOT modified LiNi_1/3Co_1/3Mn_1/3O₂ with enhanced electrochemical performance for lithium ion batteries. J Power Sources 243:374–380. https://doi.org/10.1016/j.jpowsour.2013.06.037 CrossRef

15.

Cui Y, Xu S (2015) High tap density of Ni₃(PO₄)₂ coated LiNi_1/3Co_1/3Mn_1/3O₂ with enhanced cycling performance at high cut-off voltage. J Chem Eng 23:315–320. https://doi.org/10.1016/j.cjche.2014.03.001

16.

Guo X, Cong L, Zhao Q, Tai L, Wu X, Zhang J, Wang R, Xie H, Sun L (2015) Enhancement of electrochemical performance of LiNi_1/3Co_1/3Mn_1/3O₂ by surface modification with MnO2. J Alloys Compd 651:12–18. https://doi.org/10.1016/j.jallcom.2015.06.270 CrossRef

17.

Zhu G, Wen K, Lv W, Zhou X, Liang Y, Yang F, Chen Z, Zou M, Li J, Zhang Y, He W (2015) Materials insights into low-temperature performances of lithium-ion batteries. J Power Sources 300:29–40. https://doi.org/10.1016/j.jpowsour.2015.09.056 CrossRef

18.

Ye L, Wen K, Zhang Z, Yang F, Liang Y, Lv W, Lin Y, Gu J, Dickerson JH, He W (2016) Highly efficient materials assembly via electrophoretic deposition for electrochemical energy conversion and storage devices. Adv Energy Mater 6:1502018. https://doi.org/10.1002/aenm.201502018 CrossRef

19.

Han Z, Yu J, Zhan H, Liu X, Zhou Y (2014) Sb₂O₃-modified LiNi_1/3Co_1/3Mn_1/3O₂ material with enhanced thermal safety and electrochemical property. J Power Sources 254:106–111. https://doi.org/10.1016/j.jpowsour.2013.11.126 CrossRef

20.

Wu F, Wang M, Su Y, Chen S (2009) Surface modification of LiNi_1/3Co_1/3Mn_1/3O₂ with Y₂O₃ for lithium-ion battery. J Power Sources 189:743–747. https://doi.org/10.1016/j.jpowsour.2008.08.014 CrossRef

21.

Yang Z, Guo X, Xiang W, Hua W, Zhang J, He F, Wang K, Xiao Y, Zhong B (2017) K-doped layered LiNi_0.5Co_0.2Mn_0.3O₂ cathode material: towards the superior rate capability and cycling performance. J Alloys Compd 699:358–365. https://doi.org/10.1016/j.jallcom.2016.11.245 CrossRef

22.

Park S-H, Oh SW, Sun Y-K (2005) Synthesis and structural characterization of layered Li[Ni_1/3+xCo_1/3Mn_1/3−2xMo_x]O₂ cathode materials by ultrasonic spray pyrolysis. J Power Sources 146:622–625. https://doi.org/10.1016/j.jpowsour.2005.03.078 CrossRef

23.

Ding Y, Zhang P, Long Z, Jiang Y, Xu F (2009) Morphology and electrochemical properties of Al doped LiNi_1/3Co_1/3Mn_1/3O₂ nanofibers prepared by electrospinning. J Alloys Compd 487:507–510. https://doi.org/10.1016/j.jallcom.2009.08.002 CrossRef

24.

Ding Y, Zhang P, Jiang Y, Yin J, Lu Q, Gao D (2008) Synthesis and electrochemical properties of LiNi_0.375Co_0.25Mn_0.375−xCr_xO_2−xF_x cathode materials prepared by sol–gel method. Mater Res Bull 43:2005–2009. https://doi.org/10.1016/j.materresbull.2007.10.009 CrossRef

25.

He Y, Pei L, Liao X, Ma Z (2007) Synthesis of LiNi_1/3Co_1/3Mn_1/3O_2−zF_z cathode material from oxalate precursors for lithium ion battery. J Fluor Chem 128:139–143. https://doi.org/10.1016/j.jfluchem.2006.11.002 CrossRef

26.

Cong L, Zhao Q, Wang Z, Zhang Y, Wu X, Zhang J, Wang R, Xie H, Sun L (2016) (PO₄)³⁻ polyanions doped LiNi_1/3Co_1/3Mn_1/3O₂: an ultrafast-rate, long-life and high-voltage cathode material for Li-ion rechargeable batteries. Electrochim Acta 201:8–19. https://doi.org/10.1016/j.electacta.2016.03.088 CrossRef

27.

Shi S, Tu J, Tang Y, Zhang Y, Liu X, Wang X, Gu CD (2013) Enhanced electrochemical performance of LiF-modified LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials for Li-ion batteries. J Power Sources 225:338–346. https://doi.org/10.1016/j.jpowsour.2012.10.065 CrossRef

28.

Hu S, Cheng G, Cheng M, Hwang B, Santhanam R (2009) Cycle life improvement of ZrO₂-coated spherical LiNi_1/3Co_1/3Mn_1/3O₂ cathode material for lithium ion batteries. J Power Sources 188:564–569. https://doi.org/10.1016/j.jpowsour.2008.11.113 CrossRef

29.

Wang W, Yin Z, Wang J, Wang Z, Li X, Guo H (2015) Effect of heat-treatment on Li₂ZrO₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ and its high voltage electrochemical performance. J Alloys Compd 651:737–743. https://doi.org/10.1016/j.jallcom.2015.08.114 CrossRef

30.

Liu X, Li H, Yoo E, Ishida M, Zhou H (2012) Fabrication of FePO₄ layer coated LiNi_1/3Co_1/3Mn_1/3O₂: towards high-performance cathode materials for lithium ion batteries. Electrochim Acta 83:253–258. https://doi.org/10.1016/j.electacta.2012.07.111 CrossRef

31.

Hankhuntod A, Kantarak E, Sroila W, Kumpika T, Singjai P, Thongsuwan W (2017) α-Fe₂O₃ modified TiO₂ nanoparticulate films prepared by sparking off Fe electroplated Ti tips. Appl Surf Sci. https://doi.org/10.1016/j.apsusc.2017.11.224

32.

Mohan R, Paulose R (2018) An efficient electrochemical performance of Fe₂O₃/CNT nanocomposite coated dried Lagenaria siceraria shell electrode for electrochemical capacitor. Ceram Int 44:10990–10993. https://doi.org/10.1016/j.ceramint.2018.03.154 CrossRef

33.

Nguyen T-A, Lee S-W (2017) Green synthesis of N-doped carbon modified iron oxides (N-Fe₂O₃@Carbon) using sustainable gelatin cross-linker for high performance Li-ion batteries. Electrochim Acta 248:37–45. https://doi.org/10.1016/j.electacta.2017.07.114 CrossRef

34.

Ren W, Liu D, Sun C, Yao X, Tan J, Wang C, Zhao K, Wang X, Li Q, Mai L (2018) Nonhierarchical heterostructured Fe₂O₃/Mn₂O₃ porous hollow spheres for enhanced lithium storage. Small 14:e1800659. https://doi.org/10.1002/smll.201800659 CrossRef

35.

Li J, Xu Y, Li X, Zhang Z (2013) Li₂MnO₃ stabilized LiNi_1/3Co_1/3Mn_1/3O₂ cathode with improved performance for lithium ion batteries. Appl Surf Sci 285:235–240. https://doi.org/10.1016/j.apsusc.2013.08.042 CrossRef

36.

Machida N, Kashiwagi J, Naito M, Shigematsu T (2012) Electrochemical properties of all-solid-state batteries with ZrO₂-coated LiNi_1/3Co_1/3Mn_1/3O₂ as cathode materials. Solid State Ion 225:354–358. https://doi.org/10.1016/j.ssi.2011.11.026 CrossRef

37.

He R, Zhang L, Yan M, Gao Y, Liu Z (2016) Effects of Cr₂O₃-modified LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials on the electrochemical performance of lithium-ion batteries. J Mater Sci 52:4599–4607. https://doi.org/10.1007/s10853-016-0704-z CrossRef

38.

Gong C, Lv W, Qu L, Bankole OE, Li G, Zhang R, Hu M, Lei L (2014) Syntheses and electrochemical properties of layered Li_0.95Na_0.05Ni_1/3Co_1/3Mn_1/3O₂ and LiNi_1/3Co_1/3Mn_1/3O₂. J Power Sources 247:151–155. https://doi.org/10.1016/j.jpowsour.2013.08.081 CrossRef

39.

Pan X, Duan X, Lin X, Zong F, Tong X, Li Q, Wang T (2018) Rapid synthesis of Cr-doped γ-Fe₂O₃/reduced graphene oxide nanocomposites as high performance anode materials for lithium ion batteries. J Alloys Compd 732:270–279. https://doi.org/10.1016/j.jallcom.2017.10.222 CrossRef

40.

Xiaomin M, Ruijun W (2012) One-pot synthesis of novel energy materials: sub-micron Fe₂O₃ encapsuled carbon spheres core–shell composite. Energy Procedia 17:1585–1590. https://doi.org/10.1016/j.egypro.2012.02.285 CrossRef

41.

Zhou Y, Bai P, Tang H, Zhu J, Tang Z (2016) Chemical deposition synthesis of desirable high-rate capability Al₂O₃-coated Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ as a lithium ion battery cathode material. J Electroanal Chem 782:256–263. https://doi.org/10.1016/j.jelechem.2016.10.049 CrossRef

42.

Chen C, Geng T, Du C, Zuo P, Cheng X, Ma Y, Yin G (2016) Oxygen vacancies in SnO₂ surface coating to enhance the activation of layered Li-rich Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode material for Li-ion batteries. J Power Sources 331:91–99. https://doi.org/10.1016/j.jpowsour.2016.09.051 CrossRef

43.

Wang W, Yin Z, Wang Z, Li X, Guo H (2015) Effect of heat-treatment on electrochemical performance of Li₃VO₄-coated LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials. Mater Lett 160:298–301. https://doi.org/10.1016/j.matlet.2015.07.160 CrossRef

44.

Zhang X, Chen Z, Schwarz B, Sigel F, Ehrenberg H, An K, Zhang Z, Zhang Q, Li Y, Li J (2017) Kinetic characteristics up to 4.8 V of layered LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials for high voltage lithium-ion batteries. Electrochim Acta 227:152–161. https://doi.org/10.1016/j.electacta.2017.01.014 CrossRef

45.

Liu X, He P, Li H, Ishida M, Zhou H (2013) Improvement of electrochemical properties of LiNi_1/3Co_1/3Mn_1/3O₂ by coating with V₂O₅ layer. J Alloys Compd 552:76–82. https://doi.org/10.1016/j.jallcom.2012.10.090 CrossRef

46.

Chen Y, Zhang Y, Chen B, Wang Z, Lu C (2014) An approach to application for LiNi_0.6Co_0.2Mn_0.2O₂ cathode material at high cutoff voltage by TiO₂ coating. J Power Sources 256:20–27. https://doi.org/10.1016/j.jpowsour.2014.01.061 CrossRef

47.

Luo Z, Sun Y, Liu H (2015) Electrochemical performance of a nano SnO₂-modified LiNi_1/3Co_1/3Mn_1/3O₂ cathode material. Chin Chem Lett 26:1403–1408. https://doi.org/10.1016/j.cclet.2015.06.007 CrossRef

48.

Zheng J, Zhou W, Ma Y, Jin H, Guo L (2015) Combustion synthesis of LiNi_1/3Co_1/3Mn_1/3O₂ powders with enhanced electrochemical performance in LIBs. J Alloys Compd 635:207–212. https://doi.org/10.1016/j.jallcom.2015.02.114 CrossRef

49.

Du K, Huang J, Cao Y, Peng Z, Hu G (2013) Study of effects on LiNi_0.8Co_0.15Al_0.05O₂ cathode by LiNi_1/3Co_1/3Mn_1/3O₂ coating for lithium ion batteries. J Alloys Compd 574:377–382. https://doi.org/10.1016/j.jallcom.2013.05.134 CrossRef

50.

Yuan X, Xu Q, Wang C, Liu X, Liu H, Xia Y (2015) A facile and novel organic coprecipitation strategy to prepare layered cathode material Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂ with high capacity and excellent cycling stability. J Power Sources 279:157–164. https://doi.org/10.1016/j.jpowsour.2014.12.148 CrossRef

51.

Du Q, Tang Z, Ma X, Zang Y, Sun X, Shao Y, Wen Z, Chen C (2015) Improving the electrochemical properties of high-energy cathode material LiNi_0.5Co_0.2Mn_0.3O₂ by Zr doping and sintering in oxygen. Solid State Ion 279:11–17. https://doi.org/10.1016/j.ssi.2015.07.006 CrossRef

52.

Okada K, Machida N, Naito M, Shigematsu T, Ito S, Fujiki S, Nakano M, Aihara Y (2014) Preparation and electrochemical properties of LiAlO₂-coated Li(Ni_1/3Mn_1/3Co_1/3)O₂ for all-solid-state batteries. Solid State Ionics 255:120–127. https://doi.org/10.1016/j.ssi.2013.12.019 CrossRef

Titel: Preparing enhanced electrochemical performances Fe2O3-coated LiNi1/3Co1/3Mn1/3O2 cathode materials by thermal decomposition of iron citrate
verfasst von: Yike Lei
Yonghu Li
Hongyu Jiang
Chunyan Lai
Publikationsdatum: 12.11.2018
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 5/2019
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-018-3126-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2019

Mesoporous, nitrogen-doped, graphitized carbon nanosheets embedded with cobalt nanoparticles for efficient oxygen electroreduction

Effect of preparation conditions on gas permeability and sealing efficiency of graphite foil

Silk fibroin coaxial bead-on-string fiber materials and their drug release behaviors in different pH

Direct laser writing of graphene films from a polyether ether ketone precursor

Transition from microcellular to nanocellular chain extended poly(lactic acid)/hydroxyl-functionalized graphene foams by supercritical CO2

Advanced sodium-ion pseudocapacitor performance of oxygen-implanted hard carbon derived from carbon spheres

Premium Partner

Marktübersichten