Skip to main content

2021 | OriginalPaper | Buchkapitel

Processing and Manufacturing Ti6Al4V-Based Structures and Composites Using SLM and EBM: A Review

verfasst von : Sharanjit Singh, Vishal S. Sharma, Anish Sachdeva, Vishal Sharma, Daljit Kaur, Bhargav Reddy Isanaka, Vinod Kushvaha

Erschienen in: Additive and Subtractive Manufacturing of Composites

Verlag: Springer Singapore

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

In additive manufacturing, selective laser melting (SLM) and electron beam machining (EBM) are two key processes which are widely used for fabrication of Ti6Al4V based products. These fabricated products having outstanding properties are widely employed in automotive, aerospace, marine, biomedical as well as offshore applications. This chapter compares SLM and EBM along with different process parameters, which are involved for processing of Ti6Al4V structures. For deep understanding and to analyze the potential as well as capability of Ti6Al4V structures, their microstructure and mechanical properties are also discussed. Related literature review with key focus is also presented and analyzed. As per these analyses, the challenges and their solutions are presented for improvements.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Agarwala M, Bourell D, Beaman J, Marcus H, Barlow J (1995) Direct selective laser sintering of metals. Rapid Prototyp J 1(1):26–36CrossRef Agarwala M, Bourell D, Beaman J, Marcus H, Barlow J (1995) Direct selective laser sintering of metals. Rapid Prototyp J 1(1):26–36CrossRef
2.
Zurück zum Zitat Ahmed T, Rack HJ (1998) Phase transformations during cooling in α+β titaniumalloys. Mater Sci Eng A 243(1):206–211CrossRef Ahmed T, Rack HJ (1998) Phase transformations during cooling in α+β titaniumalloys. Mater Sci Eng A 243(1):206–211CrossRef
3.
Zurück zum Zitat Bagheri ZS, Melancon D, Liu L, Johnston RB, Pasinin D (2017) Compensation strategy to reduce geometry and mechanics mismatch esin porous biomaterials built with selective laser melting. J Mech Behav Biomed Mater 70:17–27CrossRef Bagheri ZS, Melancon D, Liu L, Johnston RB, Pasinin D (2017) Compensation strategy to reduce geometry and mechanics mismatch esin porous biomaterials built with selective laser melting. J Mech Behav Biomed Mater 70:17–27CrossRef
4.
Zurück zum Zitat Banerjee D, Williams JC (2013) Perspectives on titanium science and technology. Acta Mater 61(3):844–879CrossRef Banerjee D, Williams JC (2013) Perspectives on titanium science and technology. Acta Mater 61(3):844–879CrossRef
5.
Zurück zum Zitat Bharath K N, Madhu P, Yashas G T G, Sanjay M R, Kushvaha V, Slengchin S (2020) Alkaline effect on characterization of discarded waste Moringa oleifera Fiber as a pottential eco-friendly reinforcement in biocomposites. J Polym Environ. https://doi.org/10.1007/s10924-020-01818-4 Bharath K N, Madhu P, Yashas G T G, Sanjay M R, Kushvaha V, Slengchin S (2020) Alkaline effect on characterization of discarded waste Moringa oleifera Fiber as a pottential eco-friendly reinforcement in biocomposites. J Polym Environ. https://​doi.​org/​10.​1007/​s10924-020-01818-4
8.
Zurück zum Zitat Cheng XY, Lia SJ, Murr LE, Zhang ZB, Hao YL, Yang R, Medina F, Wicker RB (2012) Compression deformation behavior of Ti–6Al–4V alloy with cellular structures fabricated by electron beam melting. J Mech Behav Biomed, 153–162. Cheng XY, Lia SJ, Murr LE, Zhang ZB, Hao YL, Yang R, Medina F, Wicker RB (2012) Compression deformation behavior of Ti–6Al–4V alloy with cellular structures fabricated by electron beam melting. J Mech Behav Biomed, 153–162.
9.
Zurück zum Zitat Chooa H, Shama KL, Bohlinga J, Ngo A, Xiao X, Ren Y, Depond PJ, Matthews MJ, Garlead E (2019) Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel. Mater Des 164:107534. Chooa H, Shama KL, Bohlinga J, Ngo A, Xiao X, Ren Y, Depond PJ, Matthews MJ, Garlead E (2019) Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel. Mater Des 164:107534.
10.
Zurück zum Zitat Chua CK, Leong KF, Lim CS (2010) Rapid prototyping: principles and applications, 4th edn. World Scientific, SingaporeCrossRef Chua CK, Leong KF, Lim CS (2010) Rapid prototyping: principles and applications, 4th edn. World Scientific, SingaporeCrossRef
11.
Zurück zum Zitat Cormier D, Harrysson O, West H (2004) Characterization of H13 steel produced via electron beam melting. Rapid Prototyp J 10(1):35–41CrossRef Cormier D, Harrysson O, West H (2004) Characterization of H13 steel produced via electron beam melting. Rapid Prototyp J 10(1):35–41CrossRef
13.
Zurück zum Zitat Deprez K, Vandenberghe S, Audenhaege KV, Vaerenbergh JV, Holen RV (2013) Rapid additive manufacturing of MR compatible multi pinhole collimators with selective laser melting of tungsten powder, Medical Physics 14(1) 012501(1–12) Deprez K, Vandenberghe S, Audenhaege KV, Vaerenbergh JV, Holen RV (2013) Rapid additive manufacturing of MR compatible multi pinhole collimators with selective laser melting of tungsten powder, Medical Physics 14(1) 012501(1–12)
14.
Zurück zum Zitat Dilip JJS, Zhang S, Teng C, Zeng K, Robinson C, Pal D, Stucker B (2017) Influence of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser melting. Progress Addit Manuf 2:157–167CrossRef Dilip JJS, Zhang S, Teng C, Zeng K, Robinson C, Pal D, Stucker B (2017) Influence of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser melting. Progress Addit Manuf 2:157–167CrossRef
15.
Zurück zum Zitat Dobrzański LA, Danikiewicz ADD, Gaweł TG (2017) Computer-aided design and selective laser melting of porous biomimetic materials. Abbreviations, Advan J Mater Process Tech 3(1):70–82 Dobrzański LA, Danikiewicz ADD, Gaweł TG (2017) Computer-aided design and selective laser melting of porous biomimetic materials. Abbreviations, Advan J Mater Process Tech 3(1):70–82
16.
Zurück zum Zitat Donachie MJ (2000) Titanium: a technical guide, 2nd edn. ASM International Donachie MJ (2000) Titanium: a technical guide, 2nd edn. ASM International
19.
Zurück zum Zitat Gibson I, Rosen DW, Stucker B (2010) Additive manufacturing technologies. In: Rapid prototyping to direct digital manufacturing. Springer, New York Gibson I, Rosen DW, Stucker B (2010) Additive manufacturing technologies. In: Rapid prototyping to direct digital manufacturing. Springer, New York
21.
Zurück zum Zitat Gong H, Rafi K, Gu H, Ram GDJ, Starr T, Stucker B (2015a) Influence of defects on mechanical properties of Ti–6Al–4 V components produced by selective laser melting and electron beam melting. Mater Des 86:545–554 Gong H, Rafi K, Gu H, Ram GDJ, Starr T, Stucker B (2015a) Influence of defects on mechanical properties of Ti–6Al–4 V components produced by selective laser melting and electron beam melting. Mater Des 86:545–554
22.
Zurück zum Zitat Gorny B, Niendorf T, Lackmann J, Thoene M, Troester T, Maier HJ (2011) In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting. Mater Sci Eng A 528:7962–7967CrossRef Gorny B, Niendorf T, Lackmann J, Thoene M, Troester T, Maier HJ (2011) In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting. Mater Sci Eng A 528:7962–7967CrossRef
24.
Zurück zum Zitat Gospodinov D, Ferdinandov N, Dimitrov S (2016) Classification, properties and application of titanium and its alloys Gospodinov D, Ferdinandov N, Dimitrov S (2016) Classification, properties and application of titanium and its alloys
25.
Zurück zum Zitat Gupta MK, Song Q, Liu Z, Sarikaya M, Jamil M, Mia M, Kushvaha V, Singla AK, Li Z (2020) Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti-6Al-4V alloy. Sustain Mater Technol 26 (December):e00218. https://doi.org/10.1016/j.susmat.2020.e00218 Gupta MK, Song Q, Liu Z, Sarikaya M, Jamil M, Mia M, Kushvaha V, Singla AK, Li Z (2020) Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti-6Al-4V alloy. Sustain Mater Technol 26 (December):e00218. https://​doi.​org/​10.​1016/​j.​susmat.​2020.​e00218
27.
Zurück zum Zitat Hara D, Nakashima Y, Sato T, Hirata M, Kanazawa M, Kohno Y, Yoshimoto K, Yoshihara Y, Nakamura A, Nakao Y, Iwamoto Y (2016) Bone bonding strength of diamond-structured porous titanium-alloy implants manufactured using the electron beam-melting technique. Mater Sci Eng C 59:1047–1052CrossRef Hara D, Nakashima Y, Sato T, Hirata M, Kanazawa M, Kohno Y, Yoshimoto K, Yoshihara Y, Nakamura A, Nakao Y, Iwamoto Y (2016) Bone bonding strength of diamond-structured porous titanium-alloy implants manufactured using the electron beam-melting technique. Mater Sci Eng C 59:1047–1052CrossRef
28.
Zurück zum Zitat Hedayati R, Janbaz S, Sadighi M, Aghdam MM, Zadpoor AA (2017) How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials. J Mech Behav Biomed Mater 65:831–841CrossRef Hedayati R, Janbaz S, Sadighi M, Aghdam MM, Zadpoor AA (2017) How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials. J Mech Behav Biomed Mater 65:831–841CrossRef
29.
Zurück zum Zitat Heinl P, Muller L, Korner C, Singer RF, Muller FA (2008) Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomater 4:1536–1544CrossRef Heinl P, Muller L, Korner C, Singer RF, Muller FA (2008) Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomater 4:1536–1544CrossRef
30.
Zurück zum Zitat Herzog D, Seyda V, Wycisk E, Emmelmann C (2016) Additive manufacturing of metals. Acta Mater 117:371–392CrossRef Herzog D, Seyda V, Wycisk E, Emmelmann C (2016) Additive manufacturing of metals. Acta Mater 117:371–392CrossRef
31.
Zurück zum Zitat Hooreweder BV, Apers Y, Lietaert K, Kruth JP (2017) Improving the fatigue performance of porous metallic biomaterials produced by selective laser melting. Acta Biomater 47:193–202CrossRef Hooreweder BV, Apers Y, Lietaert K, Kruth JP (2017) Improving the fatigue performance of porous metallic biomaterials produced by selective laser melting. Acta Biomater 47:193–202CrossRef
32.
Zurück zum Zitat Hopkinson N, Hague R, Dickens P (2006) Rapid manufacturing: an industrial revolution for a digital age. Wiley, Chichester Hopkinson N, Hague R, Dickens P (2006) Rapid manufacturing: an industrial revolution for a digital age. Wiley, Chichester
33.
Zurück zum Zitat Horn TJ, Harrysson OLA, Little DJM, West HA, Lascelles BDX, Aman R (2014) Flexural properties of Ti6Al4V rhombic dodecahedron open cellular structures fabricated with electron beam melting. Addit Manuf 1–4:2–11 Horn TJ, Harrysson OLA, Little DJM, West HA, Lascelles BDX, Aman R (2014) Flexural properties of Ti6Al4V rhombic dodecahedron open cellular structures fabricated with electron beam melting. Addit Manuf 1–4:2–11
34.
Zurück zum Zitat Hrabe NW, Heinl P, Bordia RK, Korner C, Fernandes RJ (2013) Maintenance of a bone collagen phenotype by osteoblast-like cells in 3D periodic porous titanium (Ti-6Al-4V) structures fabricated by selective electron beam melting. Connect Tissue Res 54(6):351–360CrossRef Hrabe NW, Heinl P, Bordia RK, Korner C, Fernandes RJ (2013) Maintenance of a bone collagen phenotype by osteoblast-like cells in 3D periodic porous titanium (Ti-6Al-4V) structures fabricated by selective electron beam melting. Connect Tissue Res 54(6):351–360CrossRef
35.
Zurück zum Zitat Huang H, Lan PH, Zhang YQ, Li XK, Zhang X, Yuan CF, Zheng XB, Guo Z (2015) Surface characterization and in vivo performance of plasma-sprayed hydroxyapatite-coated porous Ti6Al4V implants generated by electron beam melting. Surf Coat Tech 283:80–88CrossRef Huang H, Lan PH, Zhang YQ, Li XK, Zhang X, Yuan CF, Zheng XB, Guo Z (2015) Surface characterization and in vivo performance of plasma-sprayed hydroxyapatite-coated porous Ti6Al4V implants generated by electron beam melting. Surf Coat Tech 283:80–88CrossRef
36.
Zurück zum Zitat Inagaki I, Takechi T, Ariyasu YSN (2014) Application and Features of Titanium for the Aerospace Industry Inagaki I, Takechi T, Ariyasu YSN (2014) Application and Features of Titanium for the Aerospace Industry
37.
Zurück zum Zitat Johnson WS, Mirdamadi M (1993) Analysis of Thermal Mechanical Fatigue in Titanium Matrix Composites 14 (n.d.) Johnson WS, Mirdamadi M (1993) Analysis of Thermal Mechanical Fatigue in Titanium Matrix Composites 14 (n.d.)
38.
Zurück zum Zitat Kadkhodapour J, Montazerian H, Darabic AC, Anarakia AP, Ahmadid SM, Zadpoord AA, Schmauder S (2015) Failure mechanisms of additively manufactured porous biomaterials: effects of porosity and type of unit cell. J Mech Behav Biomed Mater 50:180–191CrossRef Kadkhodapour J, Montazerian H, Darabic AC, Anarakia AP, Ahmadid SM, Zadpoord AA, Schmauder S (2015) Failure mechanisms of additively manufactured porous biomaterials: effects of porosity and type of unit cell. J Mech Behav Biomed Mater 50:180–191CrossRef
39.
Zurück zum Zitat Kolomiets A Jr, Popov VV, Strokin E, Muller G (2018) Benefits of titanium additive manufacturing for industrial, 9 Kolomiets A Jr, Popov VV, Strokin E, Muller G (2018) Benefits of titanium additive manufacturing for industrial, 9
41.
Zurück zum Zitat Levaa ES, Carama R, Jardinib AL, Fogagnoloa JB (2016) Ductility improvement due to martensite α′ decomposition inporous Ti–6Al–4V parts produced by selective laser melting for orthopedic implants. J Mech Behav Biomed Mater 54:149–158CrossRef Levaa ES, Carama R, Jardinib AL, Fogagnoloa JB (2016) Ductility improvement due to martensite α′ decomposition inporous Ti–6Al–4V parts produced by selective laser melting for orthopedic implants. J Mech Behav Biomed Mater 54:149–158CrossRef
42.
Zurück zum Zitat Levaa ES, Jardinib AL, Fogagnoloa JB (2013) Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting. J Mech Behav Biomed Mater 26:98–108CrossRef Levaa ES, Jardinib AL, Fogagnoloa JB (2013) Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting. J Mech Behav Biomed Mater 26:98–108CrossRef
43.
Zurück zum Zitat Leyens C, Peters M (2003) Titanium and titanium alloys: fundamentals and applications. Wiley (n.d.). Wiley.com. Leyens C, Peters M (2003) Titanium and titanium alloys: fundamentals and applications. Wiley (n.d.). Wiley.com.
44.
Zurück zum Zitat Li X, Luo Y, Wang C (2012) Preparation and characterization of porous Ti6Al4V/alginate hybrid implant by combination of electron beam melting and freeze-drying. Mater Lett 81:23–26CrossRef Li X, Luo Y, Wang C (2012) Preparation and characterization of porous Ti6Al4V/alginate hybrid implant by combination of electron beam melting and freeze-drying. Mater Lett 81:23–26CrossRef
45.
Zurück zum Zitat Li X, Wang C, Zhang W, Li Y (2009) Fabrication and characterization of porous Ti6Al4V parts for biomedical applications using electron beam melting process. Mater Lett 63:403–405CrossRef Li X, Wang C, Zhang W, Li Y (2009) Fabrication and characterization of porous Ti6Al4V parts for biomedical applications using electron beam melting process. Mater Lett 63:403–405CrossRef
48.
Zurück zum Zitat Murr LE, Esquivel EV, Quinones SA, Gaytan SM, Lopez MI, Martinez EY, Medina F, Hernandez DH, Martinez E, Martinez JL, Stafford SW, Brown DK, Hoppe T, Meyers W, Lindhe U, Wicker RB (2009) Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V. Mater Charact 60(2):96–105CrossRef Murr LE, Esquivel EV, Quinones SA, Gaytan SM, Lopez MI, Martinez EY, Medina F, Hernandez DH, Martinez E, Martinez JL, Stafford SW, Brown DK, Hoppe T, Meyers W, Lindhe U, Wicker RB (2009) Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V. Mater Charact 60(2):96–105CrossRef
49.
Zurück zum Zitat Murr LE, Gaytan SM, Medina F, Martinez E, Martinez JL, Hernandez DH, Machado BI, Ramirez DA, Wicker RB (2010) Characterization of Ti–6Al–4V open cellular foams fabricated by additive manufacturing using electron beam melting. Mater Sci Eng A 527:1861–1868CrossRef Murr LE, Gaytan SM, Medina F, Martinez E, Martinez JL, Hernandez DH, Machado BI, Ramirez DA, Wicker RB (2010) Characterization of Ti–6Al–4V open cellular foams fabricated by additive manufacturing using electron beam melting. Mater Sci Eng A 527:1861–1868CrossRef
50.
Zurück zum Zitat Nava EH, Smith CJ, Derguti F, Williams ST, Léonard F, Withers PJ, Todd I, Goodall R (2015) The effect of density and feature size on mechanical properties of isostructural metallic foams produced by additive manufacturing. Acta Mater 85:387–395 Nava EH, Smith CJ, Derguti F, Williams ST, Léonard F, Withers PJ, Todd I, Goodall R (2015) The effect of density and feature size on mechanical properties of isostructural metallic foams produced by additive manufacturing. Acta Mater 85:387–395
52.
Zurück zum Zitat Parthasarathy J, Starly B, Raman S, Christensen A (2010) Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). J Mech Behav Biomed 3:249–259CrossRef Parthasarathy J, Starly B, Raman S, Christensen A (2010) Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). J Mech Behav Biomed 3:249–259CrossRef
53.
Zurück zum Zitat Rawal S, Brantley J, Karabudak N (2013). Additive manufacturing of Ti-6Al-4V alloy components for spacecraft applications. In 2013 6th International conference on recent advances in space technologies (RAST), pp 5–11. Presented at the 2013 6th international conference on recent advances in space technologies (RAST). https://doi.org/10.1109/RAST.2013.6581260 Rawal S, Brantley J, Karabudak N (2013). Additive manufacturing of Ti-6Al-4V alloy components for spacecraft applications. In 2013 6th International conference on recent advances in space technologies (RAST), pp 5–11. Presented at the 2013 6th international conference on recent advances in space technologies (RAST). https://​doi.​org/​10.​1109/​RAST.​2013.​6581260
54.
Zurück zum Zitat Sachdeva A, Singh S, Sharma VS (2013) Investigating surface roughness of parts produced by SLS process. Int J Adv Manuf Tech 64:1505–1516CrossRef Sachdeva A, Singh S, Sharma VS (2013) Investigating surface roughness of parts produced by SLS process. Int J Adv Manuf Tech 64:1505–1516CrossRef
55.
Zurück zum Zitat Salihu SA, Suleiman YI, Eyinavi AI (2019) Classification, properties and applications of titanium and its alloys used in automotive industry—a review. Am J Eng Res, 7 Salihu SA, Suleiman YI, Eyinavi AI (2019) Classification, properties and applications of titanium and its alloys used in automotive industry—a review. Am J Eng Res, 7
56.
Zurück zum Zitat Sames WJ, List FA, Pannala S, Dehoff RR, Babu SS (2016) The metallurgy and processing science of metal additive manufacturing. Int Mater Rev 1–46 Sames WJ, List FA, Pannala S, Dehoff RR, Babu SS (2016) The metallurgy and processing science of metal additive manufacturing. Int Mater Rev 1–46
58.
Zurück zum Zitat Singh S, Sharma VS, Sachdeva A (2016) Progress in selective laser sintering using metallic powders: a review. Mater Sci Technol 32:760–772 Singh S, Sharma VS, Sachdeva A (2016) Progress in selective laser sintering using metallic powders: a review. Mater Sci Technol 32:760–772
59.
Zurück zum Zitat Smith G, Brown I, Kirchner A, Ryan M, McGavin P, Sharp M (2016) Engineering properties of cellular ti-6al-4v structures fabricated by electron beam melting. Key Eng Mater 704:318–324 Smith G, Brown I, Kirchner A, Ryan M, McGavin P, Sharp M (2016) Engineering properties of cellular ti-6al-4v structures fabricated by electron beam melting. Key Eng Mater 704:318–324
60.
Zurück zum Zitat Thornton EA (1996) Thermal structures for aerospace applications. AIAA Thornton EA (1996) Thermal structures for aerospace applications. AIAA
61.
Zurück zum Zitat Tuncer N, Arslan G, Maire E, Salvo L (2011) Influence of cell aspect ratio on architecture and compressive strength of titanium foams. Mater Sci Eng A 528:7368–7374CrossRef Tuncer N, Arslan G, Maire E, Salvo L (2011) Influence of cell aspect ratio on architecture and compressive strength of titanium foams. Mater Sci Eng A 528:7368–7374CrossRef
63.
Zurück zum Zitat Veiga C, Davim J, Loureiro A (2012) Properties and applications of titanium alloys: a brief review. Rev Adv Mater Sci 32:133–148 Veiga C, Davim J, Loureiro A (2012) Properties and applications of titanium alloys: a brief review. Rev Adv Mater Sci 32:133–148
64.
Zurück zum Zitat Wang M, Lin X, Huang W (2016a) Laser additive manufacture of titanium alloys. Mater Technol 31(2):90–97. Wang M, Lin X, Huang W (2016a) Laser additive manufacture of titanium alloys. Mater Technol 31(2):90–97.
65.
Zurück zum Zitat Wang Y, Chen J, Yuan Y (2016b) Influence of the unit cell geometrical parameter to the mechanical properties of Ti6Al4V open-porous scaffolds manufactured by selective laser melting. Appl Mech Mater 851:201–210 Wang Y, Chen J, Yuan Y (2016b) Influence of the unit cell geometrical parameter to the mechanical properties of Ti6Al4V open-porous scaffolds manufactured by selective laser melting. Appl Mech Mater 851:201–210
66.
Zurück zum Zitat Wauthle R, Ahmadi SM, Yavari SA, Mulier M, Zadpoor AA, Weinans H, Humbeeck JV, Kruth JP, Schrooten J (2015a) Revival of pure titanium for dynamically loaded porous implants using additive manufacturing. Mater Sci Eng C 54:94–100 Wauthle R, Ahmadi SM, Yavari SA, Mulier M, Zadpoor AA, Weinans H, Humbeeck JV, Kruth JP, Schrooten J (2015a) Revival of pure titanium for dynamically loaded porous implants using additive manufacturing. Mater Sci Eng C 54:94–100
67.
Zurück zum Zitat Wauthle R, Vrancken B, Beynaerts B, Jorissen K, Schrooten J, Kruth J-P, Van Humbeeck J (2015b) Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures. Addit Manuf 5:77–84. https://doi.org/10.1016/j.addma.2014.12.008 Wauthle R, Vrancken B, Beynaerts B, Jorissen K, Schrooten J, Kruth J-P, Van Humbeeck J (2015b) Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures. Addit Manuf 5:77–84. https://​doi.​org/​10.​1016/​j.​addma.​2014.​12.​008
68.
Zurück zum Zitat Wieding J, Souffrant R, Mittelmeier W, Bader R (2013) Finite element analysis on the biomechanical stability of open porous titanium scaffolds for large segmental bone defects under physiological load conditions. Med Eng Phys 35(4):422–432 Wieding J, Souffrant R, Mittelmeier W, Bader R (2013) Finite element analysis on the biomechanical stability of open porous titanium scaffolds for large segmental bone defects under physiological load conditions. Med Eng Phys 35(4):422–432
69.
Zurück zum Zitat Xu-bin SU, Yong-qiang Y, Peng YU, Jian-feng S (2012) Development of porous medical implant scaffolds via laser additive manufacturing. Trans Nonferrous Met Soc China 22:181–187CrossRef Xu-bin SU, Yong-qiang Y, Peng YU, Jian-feng S (2012) Development of porous medical implant scaffolds via laser additive manufacturing. Trans Nonferrous Met Soc China 22:181–187CrossRef
71.
Zurück zum Zitat Yan C, Hao L, Hussein A, Young P (2015) Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricate dvias elective laser melting J Mech Behav Biomed Mater 51:61–73. Yan C, Hao L, Hussein A, Young P (2015) Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricate dvias elective laser melting J Mech Behav Biomed Mater 51:61–73.
72.
Zurück zum Zitat Yan M, Yu P, (2015) An overview of densification, microstructure and mechanical property of additively manufactured Ti-6Al-4V Comparison among selective laser melting, electron beam melting, laser metal deposition and selective laser sintering, and with conventional powder metallurgy. In: Lakshmanan A (ed) Sintering techniques of materials, Intech. https://doi.org/10.5772/59275. Yan M, Yu P, (2015) An overview of densification, microstructure and mechanical property of additively manufactured Ti-6Al-4V Comparison among selective laser melting, electron beam melting, laser metal deposition and selective laser sintering, and with conventional powder metallurgy. In: Lakshmanan A (ed) Sintering techniques of materials, Intech. https://​doi.​org/​10.​5772/​59275.
74.
Zurück zum Zitat Yang J, Yu H, Yin J, Gao M, Wang Z, Zeng X (2016) Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting. Mater Des 108:308–318CrossRef Yang J, Yu H, Yin J, Gao M, Wang Z, Zeng X (2016) Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting. Mater Des 108:308–318CrossRef
75.
Zurück zum Zitat Yavari SA, Chai YC, Böttger AJ, Wauthle R, Schrooteng J, Weinans H, Zadpoor AA (2015) Effects of anodizing parameters and heat treatment on nano topographical features, bioactivity, and cell culture response of additively manufactured porous titanium. Mater Sci Eng C 51:132–138CrossRef Yavari SA, Chai YC, Böttger AJ, Wauthle R, Schrooteng J, Weinans H, Zadpoor AA (2015) Effects of anodizing parameters and heat treatment on nano topographical features, bioactivity, and cell culture response of additively manufactured porous titanium. Mater Sci Eng C 51:132–138CrossRef
76.
Zurück zum Zitat Yavari SA, Wauthle R, Böttger AJ, Schrooten J, Weinans H, Zadpoor AA (2014) Crystal structure and nano topographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting. Appl Surf 290:287–294CrossRef Yavari SA, Wauthle R, Böttger AJ, Schrooten J, Weinans H, Zadpoor AA (2014) Crystal structure and nano topographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting. Appl Surf 290:287–294CrossRef
77.
Zurück zum Zitat Yavari SA, Wauthle R, Stok JVD, Riemslag AC, Janssen M, Mulier M, Kruth JP, Schrooten J, Weinans H, Zadpoor AA (2013) Fatigue behavior of porous biomaterials manufactured using selective laser melting. Mater Sci Eng C 33:4849–4858CrossRef Yavari SA, Wauthle R, Stok JVD, Riemslag AC, Janssen M, Mulier M, Kruth JP, Schrooten J, Weinans H, Zadpoor AA (2013) Fatigue behavior of porous biomaterials manufactured using selective laser melting. Mater Sci Eng C 33:4849–4858CrossRef
78.
Zurück zum Zitat Zargarian A, Esfahanian M, Kadkhodapour J, Rad SZ (2016) Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures. Mater Sci Eng C 60:339–347CrossRef Zargarian A, Esfahanian M, Kadkhodapour J, Rad SZ (2016) Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures. Mater Sci Eng C 60:339–347CrossRef
79.
Zurück zum Zitat Zhang S, Wei Q, Cheng L, Li S, Shi Y (2014) Effects of scan line spacing on pore characteristics and mechanical properties of porous Ti6Al4V implants fabricated by selective laser melting. Mater Des 63:185–193CrossRef Zhang S, Wei Q, Cheng L, Li S, Shi Y (2014) Effects of scan line spacing on pore characteristics and mechanical properties of porous Ti6Al4V implants fabricated by selective laser melting. Mater Des 63:185–193CrossRef
80.
Zurück zum Zitat Zhang D, Cai Q, Liu J, Li R (2011) Research on process and microstructure formation of w-ni-fe alloy fabricated by selective laser melting. J Mater Eng Perf 20(6):1049–1054 Zhang D, Cai Q, Liu J, Li R (2011) Research on process and microstructure formation of w-ni-fe alloy fabricated by selective laser melting. J Mater Eng Perf 20(6):1049–1054
81.
Zurück zum Zitat Zhao S, Lia SJ, Hou WT, Hao YL, Yang R, Misra RDK (2016) The influence of cell morphology on the compressive fatigue behavior of Ti-6Al4V meshes fabricated by electron beam melting. J Mech Behav Biomed 59:251–264CrossRef Zhao S, Lia SJ, Hou WT, Hao YL, Yang R, Misra RDK (2016) The influence of cell morphology on the compressive fatigue behavior of Ti-6Al4V meshes fabricated by electron beam melting. J Mech Behav Biomed 59:251–264CrossRef
Metadaten
Titel
Processing and Manufacturing Ti6Al4V-Based Structures and Composites Using SLM and EBM: A Review
verfasst von
Sharanjit Singh
Vishal S. Sharma
Anish Sachdeva
Vishal Sharma
Daljit Kaur
Bhargav Reddy Isanaka
Vinod Kushvaha
Copyright-Jahr
2021
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-16-3184-9_4

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.