nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Pulsating Abrasive Water Jet Cutting Using a Standard Abrasive Injection Cutting Head – Preliminary Tests

verfasst von : Libor Sitek, Petr Hlaváček, Josef Foldyna, Michael Jarchau, Vladimír Foldyna

Erschienen in: Advances in Water Jetting

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper focuses on research into disintegration effects of a pulsating abrasive water jet using a standard abrasive injection cutting head. Forced pulses of a frequency of 20 kHz were generated by a piezoelectric pulse generator using a sonotrode placed in a high pressure system in front of a water jet nozzle. Several variants of the water jet generation in the cutting head were investigated - a continuous and pulsating water jets without the presence of the focusing tube to verify the pulse formation in the mixing chamber. Consequently, an abrasive water jet and a pulsating abrasive water jet with an installed focusing tube were studied. At a selected water pressure of 70 MPa, an increase in cutting effects of the pulsating abrasive water jet on average by 15–20% compared to the continuous abrasive water jet of the same parameters was observed. The authors consider that the increase in efficiency is mainly caused by better distribution of abrasives over the focusing tube cross-section, largely due to separated slugs of water forming the pulsating water jet. In this regard, the authors see the potential of further increase in the efficiency of abrasive water jets. Modeling and simulation of the water flow using an appropriate computational system can contribute to achieving an optimal configuration of the pulsating abrasive water jet.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Development of an Assistance and Control System for Waterjet Cutting of Free-Form Workpieces

Nächstes Kapitel Mechanical Strengthening of Anti-Corrosive Surface Layers by Water Jet

Ren, B., Daniels, B., Yan, W., Tieu, A., Vijay, M.: Abrasive-entrained forced pulsed waterjet technique – basic study. In: Proceedings of 2005 WJTA American Waterjet Conference, Paper 2B-3 (2005)

Bai, C., Chandra, S., Daniels, B., Ren, B., Yan, W., Tieu, A., Vijay, M.: Abrasive-entrained high-frequency pulsed waterjet: basic study and applications. In: Proceedings of the 18th International Conference on Water Jetting, pp. 325–336 (2006)

Xue, F.: A novel metal-cutting technology for high-risk environments using self-excited oscillation pulsed abrasive water jet. In: 3rd International Forum on Energy, Environment Science and Materials Advances in Engineering Research, vol. 120, 2017 (IFEESM 2017) pp. 714–718 (2018)

Hancox, N.L., Brunton, J.H.: The erosion of solids by the repeated impact of liquid drops. Philosophical Trans. Royal Soc. London. Series A, Math. Phys. Sci. vol. 260, no. 1110, pp. 121–139 (1966)

Heymann, F.J.: High-speed impact between a liquid drop and a solid surface. J. Appl. Phys. 40(13), 5113–5122 (1969)CrossRef

Thomas, G.P., Brunton, J.H.: Drop impingement erosion of metals. In: Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, vol. 314, no. 1519, pp. 549–565 (1970)

Vijay, M.M., Foldyna, J.: Ultrasonically modulated pulsed jets: basic study. In: 12^th International Conference on Jet Cutting Technology, N. G. Allen, Editor, BHR Group Conference Series, Publication No. 13, Mechanical Engineering Publications Limited, London, pp. 15–35 (1994)

Foldyna, J., Sitek, L., Švehla, B., Švehla, Š.: Utilization of ultrasound to enhance high-speed water jet effects. Ultrasonic Sonochemistry 11(3–4), 131–137 (2004)CrossRef

Foldyna, J., Sitek, L., Ščučka, J., Martinec, P., Valíček, J., Páleníková, K.: Effects of pulsating water jet impact on aluminium surface. J. Mater. Process. Technol. vol. 209, no. 20, pp. 6174–6180 (2009). Elsevier, 2009. ISSN 0924-0136

10.

Jarchau, M.: Method for manufacturing water abrasive jet, involves supplying abrasive agent under high pressure water jet according to injector principle, and interrupting water jet before supplying abrasive agent. German patent application. DE 102008008 A1 (2008)

11.

Foldyna, J., Švehla, B.: Method of generation of liquid jet pulsations and apparatus for implementation of this method. European Patent EP 1 863 601 B1, Date of Patent: 5 January (2011)

12.

Foldyna, J., Švehla, B.: Method of generation of pressure pulsations and apparatus for implementation of this method. 2011, US Patent US 7,934,666 B2, Date of Patent: 3 May (2011)

13.

Vijay, M.M.: Main lecture: properties and parameters of water jets. In: Rakowski, Z. (ed.) Proceedings of International Conference Geomechanics, Balkema, Rotterdam, vol. 91, pp. 207–222 (1992)

14.

Leach, S.J., Walker, G.J.: Some aspect of rock cutting by high speed water jets. Phil. Trans. R. Soc., A 260, 395–310 (1966)

15.

Yanaida, K.: Flow characteristics of water jets. In: Proceedings of the 2nd International Symposium on Jet Cutting Technology, BHRA, Cambridge (1974)

16.

Yanaida, K., Ohashi, A.: Flow characteristics of water jets in air. In: Proceedings of the 5th International Symposium on Jet Cutting Technology, BHRA, Hannover (1980)

17.

Przyklenk, K., Schlatter, M.: Simulation of the cutting process in water jetting with the finite element method. In: Proceedings of the 8th International Symposium on Jet Cutting Technology, BHRA, Durham (1986)

18.

Hlaváč, L.M., Sochor, T.: A contribution to the physics of a high velocity abrasive particle interaction with brittle non-homogeneous materials. In: Allen, N.G. (ed.) Proceedings of the 12th International Conference Jet Cutting Technology, Mech. Eng. Pub. Ltd., London, p. 117–126 (1994)

19.

König, W., Wulf, Ch.: The influence of the cutting parameters on jet forces and the geometry of the kerf. In: Proceedings of the 7th International Symposium on Jet Cutting Technology, BHRA, Ottava (1984)

20.

Zakin, J.L., Summers, D.A.: The effect of viscoelastic additives on jet structures. In: Proceedings of the 3rd International Symposium on Jet Cutting Technology. Chicago, USA, Paper A4 (1976)

21.

Summers, D.A.: Waterjetting Technology. E & FN SPON, London (1995)CrossRef

22.

Sitek, L., Foldyna, J., Martinec, P., Klich, J., Mašláň, M.: On the preparation of precursors and carriers of nanoparticles by water jet technology. Tech. Gazette 19(3), 465–474 (2012)

23.

Sitek, L., Hlaváček, P., Bodnárová, L.: Use of high-speed water flows for accelerated mechanical modelling of erosive wear of concrete surfaces. In: Stančeková, D., Vaško, M., Rudawska, A., Čuboňová, N., Sapietová, A., Mrázik, J., Szabelski, J., Tlach, V. (eds.) Innovative Technologies in Engineering Production (ITEP 2018), Bojnice, Slovak RepublicMATEC Web of Conferences, vol. 244, p. 02007 (2018), 11–13 September (2018). https://doi.org/10.1051/matecconf/201824402007

Titel: Pulsating Abrasive Water Jet Cutting Using a Standard Abrasive Injection Cutting Head – Preliminary Tests
verfasst von: Libor Sitek
Petr Hlaváček
Josef Foldyna
Michael Jarchau
Vladimír Foldyna
Verlag: Springer International Publishing
Buch: Advances in Water Jetting
Print ISBN: 978-3-030-53490-5

Electronic ISBN: 978-3-030-53491-2

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-53491-2_20

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht