Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
Journal of Materials Science: Materials in Electronics
Erschienen in: Journal of Materials Science: Materials in Electronics 10/2021

05.05.2020 | Review

Review on applications of PEDOTs and PEDOT:PSS in perovskite solar cells

verfasst von: Yijie Xia, Shuyang Dai

Erschienen in: Journal of Materials Science: Materials in Electronics | Ausgabe 10/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is the most successful conducting polymer in terms of practical application. It has good film forming ability, high transparency in visible light range, high mechanical flexibility, high electrical conductivity, and good stability in air. PEDOT:PSS has wide applications in many areas. This review summarizes its new applications in perovskite solar cells and approaches to modify the PEDOT:PSS layer for better device performance with the corresponding mechanisms. The most cutting edge progresses in perovskite solar cells with PEDOT:PSS are highlighted.
Vorheriger Artikel Special issue on Perovskite materials
Nächster Artikel Recent advancements in using perovskite single crystals for gamma-ray detection

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
R. Po, C. Carbonera, A. Bernardi, F. Tinti, N. Camaioni, Polymer- and carbon-based electrodes for polymer solar cells: toward low-cost, continuous fabrication over large area. Sol. Energy Mater. Sol. Cells 100, 97–114 (2012)
2.
V.R. Feig, H. Tran, M. Lee, Z.N. Bao, Mechanically tunable conductive interpenetrating network hydrogels that mimic the elastic moduli of biological tissue. Nat. Commun. 9, 2740 (2018)
3.
A.K.K. Kyaw, D.H. Wang, V. Gupta, J. Zhang, S. Chand, G.C. Bazan, A.J. Heeger, Efficient solution-processed small-molecule solar cells with inverted structure. Adv. Mater. 25, 2397 (2013)
4.
A. Sharma, G. Andersson, D.A. Lewis, Role of humidity on indium and tin migration in organic photovoltaic devices. Phys. Chem. Chem. Phys. 13, 4381 (2011)
5.
E. Voroshazi, G. Uytterhoeven, K. Cnops, T. Conard, P. Favia, H. Bender, R. Muller, D. Cheyns, Root-cause failure analysis of photocurrent loss in polythiophene: fullerene-based inverted solar cells. ACS Appl. Mater. Interfaces 7, 618 (2015)
6.
V.M. Drakonakis, A. Savva, M. Kokonou, S.A. Choulis, Investigating electrodes degradation in organic photovoltaics through reverse engineering under accelerated humidity lifetime conditions. Sol. Energy Mater. Sol. Cells 130, 544 (2014)
7.
X. Bao, L. Sun, W. Shen, C. Yang, W. Chen, R. Yang, Facile preparation of TiOX film as an interface material for efficient inverted polymer solar cells. J. Mater. Chem. A 2, 1732 (2014)
8.
X. Fan, C. Cui, G. Fang, J. Wang, S. Li, F. Cheng, H. Long, Y. Li, Efficient polymer solar cells based on poly(3-hexylthiophene):indene‐C70 bisadduct with a MoO3 buffer layer. Adv. Funct. Mater. 22, 585 (2012)
9.
S.I. Na, S.S. Kim, J. Jo, D.Y. Kim, Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes. Adv. Mater. 20, 4061 (2008)
10.
F. Ely, A. Matsumoto, B. Zoetebier, V. Peressinotto, M. Hirata, D. Sousa, R. Maciel, Handheld and automated ultrasonic spray deposition of conductive PEDOT:PSS films and their application in AC EL devices. Org. Electron. 15, 1062 (2014)
11.
S. Allard, M. Forster, B. Souharce, H. Thiem, U. Scherf, Organic semiconductors for solution-processable field‐effect transistors (OFETs). Angew. Chem., Int. Ed. 47, 4070 (2008)
12.
Y. Xia, K. Sun, J. Ouyang, Solution-processed metallic conducting polymer films as transparent electrode of optoelectronic devices. Adv. Mater. 24, 2436 (2012)
13.
N. Kim, S. Kee, S.H. Lee, B.H. Lee, Y.H. Kahng, Y.-R. Jo, B.-J. Kim, K. Lee, Highly conductive PEDOT: PSS nanofibrils induced by solution-processed crystallization. Adv. Mater. 26, 2268 (2014)
14.
N. Kim, H. Kang, J.-H. Lee, S. Kee, S.H. Lee, K. Lee, Highly conductive all-plastic electrodes fabricated using a novel chemically controlled transfer‐printing method. Adv. Mater. 27, 2317 (2015)
15.
X. Fan, B. Xu, S. Liu, C. Cui, J. Wang, F. Yan, Transfer-printed PEDOT: PSS electrodes using mild acids for high conductivity and improved stability with application to flexible organic solar cells. ACS Appl. Mater. Interfaces 8, 14029 (2016)
16.
J.Y. Kim, J.H. Jung, D.E. Lee, J. Joo, Enhancement of electrical conductivity of poly (3,4-ethylenedioxythiophene)/poly (4-styrenesulfonate) by a change of solvents. Synth. Met. 126, 311–316 (2002)
17.
J. Ouyang, Q. Xu, C. Chu, Y. Yang, G. Li, J. Shinar, On the mechanism of conductivity enhancement in poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) film through solvent treatment. Polymer 45, 8443–8450 (2004)
18.
X. Crispin, F.L.E. Jakobsson, A. Crispin, P.C.M. Grim, P. Andersson, A. Volodin, C. Van Haesendonck, M.Va.n der Auweraer, W.R. Salaneck, M.Berggren, The origin of the high conductivity of poly (3,4-ethylenedioxythiophene)–poly (styrenesulfonate)(PEDOT-PSS) plastic electrodes. Chem. Mater. 18, 4354–4360 (2006)
19.
A.M. Nardes, R.A.J. Janssen, M.A. Kemerink, A morphological model for the solvent-enhanced conductivity of PEDOT: PSS thin films. Adv. Funct. Mater. 18, 865–871 (2008)
20.
M. Döbbelin, R. Marcilla, M. Salsamendi, C. Pozo-Gonzalo, P.M. Carrasco, J.A. Pompos, D. Mecerreyes, Influence of ionic liquids on the electrical conductivity and morphology of PEDOT:PSS films. Chem. Mater. 19, 2147–2149 (2007)
21.
B.H. Fan, X.G. Mei, J. Ouyang, Significant conductivity enhancement of conductive poly(3,4-ethylenedioxythiophene):poly- (styrenesulfonate) films by adding anionic surfactants into polymer solution. Macromolecules 41, 5971–5973 (2008)
22.
L.A.A. Pettersson, S. Ghosh, O. Inganäs, Optical anisotropy in thin films of poly(3,4-ethylenedioxythiophene)–poly(4-styrenesulfonate). Org. Electron. 3, 143–148 (2002)
23.
S.K.M. Jönsson, J. Birgerson, X. Crispin, G. Greczynski, W. Osikowicz, A.W.D.V.D. Gon, W.R. Salaneck, M. Fahlman, The effects of solvents on the morphology and sheet resistance in poly (3, 4-ethylenedioxythiophene)- polystyrenesulfonic acid (PEDOT-PSS) films. Synth. Met. 139, 1–10 (2003)
24.
M. Reyes-Reyes, I. Cruz-Cruz, R. Lopez-Sandoval, Enhancement of the electrical conductivity in PEDOT:PSS films by the addition of dimethyl Sulfate. J. Phys. Chem. C 114, 20220–20224 (2010)
25.
Y. Xia, J. Ouyang, Salt-induced charge screening and significant conductivity enhancement of conducting poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate). Macromolecules 42, 4141–4147 (2009)
26.
Y. Xia, H.M. Zhang, J. Ouyang, Highly conductive PEDOT: PSS films prepared through a treatment with zwitterions and their application in polymer photovoltaic cells. J. Mater. Chem. 20, 9740–9747 (2010)
27.
Y. Xia, J. Ouyang, PEDOT:PSS films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells. J. Mater. Chem. 21, 4927–4936 (2011)
28.
Y. Xia, J. Ouyang, Anion effect on salt-induced conductivity enhancement of poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate) films. Anion effect on salt-induced conductivity enhancement of poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate) films. Org. Electron. 11, 1129–1135 (2010)
29.
Y.H. Kim, C. Sachse, M.L. Machala, C. May, L. Müller-Meskamp, K. Leo, Highly conductive PEDOT:PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells. Adv. Funct. Mater. 21, 1076–1081 (2011)
30.
Y. Xia, K. Sun, J. Ouyang, Highly conductive poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) films treated with an amphiphilic fluoro compound as the transparent electrode of polymer solar cells. Energy Environ. Sci. 5, 5325–5332 (2012)
31.
Y. Xia, K. Sun, J. Chang, J. Ouyang, Effects of organic inorganic hybrid perovskite materials on the electronic properties and morphology of poly (3, 4-ethylenedioxythiophene): poly(styrenesulfonate) and the photovoltaic performance of planar perovskite solar cells. J. Mater. Chem. A 3, 15897–15904 (2015)
32.
D.J. Lipomi, M. Vosgueritchian, B.C. Tee, S.L. Hellstrom, J.A. Lee, C.H. Fox, Z. Bao, Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes. Nat. Nanotechnol. 6, 788 (2011)
33.
C.Z. Liao, M. Zhang, L.Y. Niu, Z.J. Zheng, F. Yan, Highly selective and sensitive glucose sensors based on organic electrochemical transistors with graphene-modified gate electrodes. J. Mater. Chem. B 1, 3820 (2013)
34.
C.Z. Liao, C.H. Mak, M. Zhang, H.L.W. Chan, F. Yan, Flexible organic electrochemical transistors for highly selective enzyme biosensors and used for saliva testing. Adv. Mater. 27, 676 (2015)
35.
I. Agua, D. Mantione, U. Ismailov, A. Sanchez-Sanchez, N. Aramburu, G.G. Malliaras, D. Mecerreyes, E. Ismailova, DVS-crosslinked PEDOT:PSS free-standing and textile electrodes toward wearable health monitoring. Adv. Mater. Technol. 3, 1700322 (2018)
36.
X. Fan, B. Xu, N.X. Wang, J.Z. Wang, S.H. Liu, H. Wang, F. Yan, Highly conductive stretchable all-plastic electrodes using a novel dipping‐embedded transfer method for high‐performance wearable sensors and semitransparent organic solar cells. Adv. Electron. Mater. 3, 1600471 (2017)
37.
S.C.B. Mannsfeld, B.C.K. Tee, R.M. Stoltenberg, C.V.H.H. Chen, S. Barman, B.V.O. Muir, A.N. Sokolov, C. Reese, Z. Bao, Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers. Nat. Mater. 9, 859 (2010)
38.
D.J. Cohen, D. Mitra, K. Peterson, M.M. Maharbiz, A highly elastic, capacitive strain gauge based on percolating nanotube networks. Nano Lett. 12, 1821 (2012)
39.
J.-Y. Sun, C. Keplinger, G.M. Whitesides, Z. Suo, Ionic skin. Adv. Mater. 26, 7608 (2014)
40.
J. Jeon, H. Lee, Z. Bao, Flexible wireless temperature sensors based on Ni microparticle-filled binary polymer composites. Adv. Mater. 25, 850 (2013)
41.
H. Yang, D. Qi, Z. Liu, B.K. Chandran, T. Wang, J. Yu, X. Chen, Soft thermal sensor with mechanical adaptability. Adv. Mater. 28, 9175 (2016)
42.
S. Gong, W.L. Cheng, One-dimensional nanomaterials for soft electronics. Adv. Electron. Mater. 3, 1600314 (2017)
43.
S. Gong, D.T.H. Lai, B. Su, K.J. Si, Z. Ma, L.W. Yap, P.Z. Guo, W.L. Cheng, Highly stretchy black gold e-skin nanopatches as highly sensitive wearable biomedical sensors. Adv. Electron. Mater. 1, 1400063 (2015)
44.
A. Chortos, J. Liu, Z. Bao, Pursuing prosthetic electronic skin. Nat. Mater. 15, 937 (2016)
45.
R.C. Webb, A.P. Bonifas, A. Behnaz, Y. Zhang, K.J. Yu, H. Cheng, M. Shi, Z. Bian, Z. Liu, Y.-S. Kim, W.-H. Yeo, J.S. Park, J. Song, Y. Li, Y. Huang, A.M. Gorbach, J.A. Rogers, Ultrathin conformal devices for precise and continuous thermal characterization of human skin. Nat. Mater. 12, 938 (2013)
46.
Y.-C. Lai, J. Deng, S. Niu, W. Peng, C. Wu, R. Liu, Z. Wen, Z.L. Wang, Electric eel-skin-inspired mechanically durable and super-stretchable nanogenerator for deformable power source and fully autonomous conformable electronic-skin applications. Adv. Mater. 28, 10024 (2016)
47.
Y. Xia, J. Fang, P. Li, B. Zhang, H. Yao, J. Chen, J. Ding, J. Ouyang, Solution-processed highly superparamagnetic and conductive PEDOT:PSS/Fe3O4 nanocomposite films with high transparency and high mechanical flexibility. ACS Appl. Mater. Interfaces 9, 19001–19010 (2017)
48.
J. Ouyang, ‘Secondary doping’ methods to significantly enhance the conductivity of PEDOT:PSS for its application as transparent electrode of optoelectronic devices. Displays 34, 423–436 (2013)
49.
H. Shi, C. Liu, Q. Jiang, J. Xu, Effective approaches to improve the electrical conductivity of PEDOT:PSS: a review. Adv. Electron. Mater. 1, 1500017 (2015)
50.
K. Sun, S. Zhang, P. Li, Y. Xia, X. Zhang, D. Du, F. Isikgor, J. Ouyang, Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices. J. Mater. Sci.: Mater. Electron. 26, 4438–4462 (2015)
51.
H. Yao, Z. Fan, H. Cheng, X. Guan, C. Wang, K. Sun, J. Ouyang, Recent development of thermoelectric polymers and composites. Macromol. Rapid Commun. 39, 1700727 (2018)
52.
X. Fan, W. Nie, H. Tsai, N. Wang, H. Huang, Y. Cheng, R. Wen, M. Liujia, F. Yan, Y. Xia, PEDOT:PSS for flexible and stretchable electronics: modifications, strategies, and applications. Adv. Sci. 6, 1900813 (2019)
53.
Q. Qiao, Organic Solar Cells, 1st edn. (CRC Press, Boca Raton, 2017), p. 44
54.
55.
H.-S. Kim, C.-R. Lee, J.-H. Im, K.-B. Lee, T. Moehl, A. Marchioro, S.-J. Moon, R. Humphry-Baker, J.-H. Yum, J.E. Moser, M. Grätzel, N.-G. Park, Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2, 591 (2012)
56.
M.D. McGehee, Perovskite solar cells: continuing to soar. Nat. Mater. 13, 845–846 (2014)
57.
M. Grätzel, The light and shade of perovskite solar cells. Nat. Mater. 13, 838–842 (2014)
58.
M.C. Beard, J.M. Luther, A.J. Nozik, The promise and challenge of nanostructured solar cells. Nat. Nanotechnol. 9, 951–954 (2014)
59.
J. Jean, P.R. Brown, R.L. Jaffe, T. Buonassisi, V. Bulović, Pathways for solar photovoltaics. Energy Environ. Sci. 8, 1200–1219 (2015)
60.
K. Wang, C. Liu, P. Du, J. Zheng, X. Gong, Bulk heterojunction perovskite hybrid solar cells with large fill factor. Energy Environ. Sci. 8, 1245–1255 (2015)
61.
B.J. Kim, D.H. Kim, Y.Y. Lee, H.W. Shin, G.S. Han, J.S. Hong, K. Mahmood, T.K. Ahn, Y.C. Joo, K.S. Hong, N.G. Park, S. Lee, H.S. Jung, Highly efficient and bending durable perovskite solar cells: toward a wearable power source. Energy Environ. Sci. 8, 916–921 (2015)
62.
C.D. Bailie, M.G. Christoforo, J.P. Mailoa, A.R. Bowring, E.L. Unger, W.H. Nguyen, J. burschka, N. Pellet, J.Z. Lee, M. Grätzel, R. Noufi, T. Buonassisi, A. Salleo, M.D. McGehee, Semi-transparent perovskite solar cells for tandems with silicon and CIGS. Energy Environ. Sci. 8, 956–963 (2015)
63.
D. Liu, T.L. Kelly, Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques. Nat. Photonics 8, 133–138 (2014)
64.
D. Bryant, P. Greenwood, J. Troughton, M. Wijdekop, M. Carnie, M. Davies, K. Wojciechowski, H.J. Snaith, T. Watson, D. Worsley, A transparent conductive adhesive laminate electrode for high-efficiency organic‐inorganic lead halide perovskite solar cells. Adv. Mater. 26, 7499–7504 (2014)
65.
N.K. Noel, A. Abate, S.D. Stranks, E.S. Parrott, V.M. Burlakov, A. Goriely, H.J. Snaith, Enhanced photoluminescence and solar cell performance via lewis base passivation of organic–inorganic lead halide perovskites. ACS Nano 8, 9815–9821 (2014)
66.
J.S. Manser, P.V. Kamat, Band filling with free charge carriers in organometal halide perovskites. Nat. Photonics 8, 737–743 (2014)
67.
J. Chang, H. Zhu, B. Li, F. Isikgor, Y. Hao, Q. Xu, J. Ouyang, Boosting the performance of planar heterojunction perovskite solar cell by controlling the precursor purity of perovskite materials. J. Mater. Chem. A 4, 887–893 (2016)
68.
J. Chang, H. Zhu, J. Xiao, F. Isikgor, Z. Lin, Y. Hao, K. Zeng, Q. Xu, J. Ouyang, Enhancing the planar heterojunction perovskite solar cells performance through tuning precursor ratio. J. Mater. Chem. A 4, 7943–7949 (2016)
69.
J. Chang, Z. Lin, H. Zhu, F. Isikgor, Q. Xu, C. Zhang, Y. Hao, J. Ouyang, Enhancing the photovoltaic performance of planar heterojunction perovskite solar cells by doping the perovskite layer with alkali metal ions. J. Mater. Chem. A 4, 16546–16552 (2016)
70.
L. Zhou, J. Chang, Z. Liu, X. Sun, Z. Lin, D. Chen, C. Zhang, J. Zhang, Y. Hao, Enhanced planar perovskite solar cell efficiency and stability using a perovskite/PCBM heterojunction formed in one-step. Nanoscale 10, 3053–3059 (2018)
71.
W. Yu, K. Wang, B. Guo, X. Qiu, Y. Hao, J. Chang, Y. Li, Effect of ultraviolet absorptivity and waterproofness of poly (3, 4-ethylenedioxythiophene) with extremely weak acidity, high conductivity on enhanced stability of perovskite solar cells. J. Power Sources 358, 29–38 (2017)
72.
J. Huang, C. Wang, Z. Liu, X. Qiu, J. Yang, J. Chang, Simultaneously enhanced durability and performance by employing dopamine copolymerized PEDOT with high work function and water-proofness for inverted perovskite solar cells. J. Mater. Chem. C 6, 2311–2318 (2018)
73.
Z. Lin, J. Chang, J. Xiao, H. Zhu, Q. Xu, C. Zhang, J. Ouyang, Y. Hao, Interface studies of the planar heterojunction perovskite solar cells. Sol. Energy Mater. Sol. Cells 157, 783–790 (2016)
74.
Z. Lin, J. Zhou, L. Zhou, K. Wang, W. Li, J. Su, Y. Hao, Y. Li, J. Chang, Simultaneously enhanced performance and stability of inverted perovskite solar cells via a rational design of hole transport layer. Org. Electron. 73, 69–75 (2019)
75.
L. Hu, J. Fu, K. Yang, Z. Xiong, M. Wang, B. Yang, X. Wang, X. Tang, Z. Zang, Inhibition of in-plane charge transport in hole transfer layer to achieve high fill factor for inverted planar perovskite solar cells. Solar RRL 3, 1900104 (2019)
76.
X. Liu, B. Li, N. Zhang, Z. Yu, K. Sun, B. Tang, D. Shi, H. Yao, J. Ouyang, Multifunctional RbCl dopants for efficient inverted planar perovskite solar cell with ultra-high fill factor, negligible hysteresis and improved stability. Nano Energy 53, 567–578 (2018)
77.
L. Hu, M. Li, K. Yang, Z. Xiong, B. Yang, M. Wang, X. Tang, Z. Zang, X. Liu, B. Li, Z. Xiao, S. Lu, H. Gong, J. Ouyang, K. Sun, PEDOT:PSS monolayers to enhance hole extraction and stability of perovskite solar cells. J. Mater. Chem. A 6, 16583–16589 (2018)
78.
L. Hu, K. Sun, M. Wang, W. Chen, B. Yang, J. Fu, Z. Xiong, X. Li, X. Tang, Z. Zang, S. Zhang, L. Sun, M. Li, Inverted planar perovskite solar cells with a high fill factor and negligible hysteresis by the dual effect of NaCl-doped PEDOT: PSS. ACS Appl. Mater. Interfaces 9, 50, 43902–43909 (2017)
79.
K. Sun, P. Li, Y. Xia, J. Chang, J. Ouyang, Transparent conductive oxide-free perovskite solar cells with PEDOT: PSS as transparent electrode. ACS Appl. Mater. Interfaces 7(28), 15314–15320 (2015)
80.
S. Zhang, Z. Yu, P. Li, B. Li, F.H. Isikgor, D. Du, K. Sun, Y. Xia, J. Ouyang, Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate films with low conductivity and low acidity through a treatment of their solutions with probe ultrasonication and their application as hole transport layer in polymer solar cells and perovskite solar cells. Org. Electron. 32, 149–156 (2016)
81.
K. Sun, J. Chang, F.H. Isikgor, P. Li, J. Ouyang, Efficiency enhancement of planar perovskite solar cells by adding zwitterion/LiF double interlayers for electron collection. Nanoscale 7(3), 896–900 (2015)
82.
83.
S.D. Stranks, G.E. Eperon, G. Grancini, C. Menelaou, M.J.P. Alcocer, T. Leijtens, L.M. Herz, A. Petrozza, H.J. Snaith, Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science 342, 341–344 (2013)
84.
C.H. Wang, C.J. Zhang, S.T. Wang, G. Liu, H.Y. Xia, S.C. Tong, J. He, D.M. Niu, C.H. Zhou, K.X. Ding, Y.L. Gao, J.L. Yang, Low-temperature processed, efficient, and highly reproducible cesium-doped triple cation perovskite planar heterojunction solar cells. Sol. RRL 2, 1700209 (2018)
85.
W.J. Yin, T.T. Shi, Y.F. Yan, Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber. Appl. Phys. Lett. 104, 063903 (2014)
86.
C. Wehrenfennig, G.E. Eperon, M.B. Johnston, H.J. Snaith, L.M. Herz, High charge carrier mobilities and lifetimes in organolead trihalide perovskites. Adv. Mater. 26, 1584–1589 (2014)
87.
Q. Dong, Y. Fang, Y. Shao, P. Mulligan, J. Qiu, L. Cao, J. Huang, Electron-hole diffusion lengths > 175 µm in solution-grown CH3NH3PbI3 single crystals. Science 347, 967–970 (2015)
88.
G. Xing, N. Mathews, S. Sun, S.S. Lim, Y.M. Lam, M. Gr̈atzel, S. Mhaisalkar, T.C. Sum, Long-range balanced electron- and hole-transport lengths in organic-inorganicCH3NH3PbI3. Science 342, 344–347 (2013)
89.
K.O. Brinkmann, J. Zhao, N. Pourdavoud, T. Becker, T. Hu, S. Olthof, K. Meerholz, L. Hoffmann, T. Gahlmann, R. Heiderhoff, M.F. Oszajca, N.A. Luechinger, D. Rogalla, Y. Chen, B. Cheng, T. Riedl, Suppressed decomposition of organometal halide perovskites by impermeable electron-extraction layers in inverted solar cells. Nat. Commun. 8, 13938 (2017)
90.
Z.G. Xiao, C. Bi, Y.C. Shao, Q.F. Dong, Q. Wang, Y.B. Yuan, C.G. Wang, Y.L. Gao, J.S. Huang, Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers. Energy Environ. Sci. 7, 2619–2623 (2014)
91.
P.W. Liang, C.Y. Liao, C.C. Chueh, F. Zuo, S.T. Williams, X.K. Xin, J.J. Lin, A.K.Y. Jen, Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-hetero-junction solar cells. Adv. Mater. 26, 3748–3754 (2014)
92.
H. Azimi, T. Ameri, H. Zhang, Y. Hou, C.O.R. Quiroz, J. Min, M.Y. Hu, Z.G. Zhang, T. Przybilla, G.J. Matt, E. Spiecker, Y.F. Li, C.J. Brabec, A universal interface layer based on an amine-functionalized fullerene derivative with dual functionality for efficient solution processed organic and perovskite solar cells. Adv. Energy Mater. 5, 1401692 (2015)
93.
C. Sun, Z.H. Wu, H.L. Yip, H. Zhang, X.F. Jiang, Q.F. Xue, Z.C. Hu, Z.H. Hu, Y. Shen, M.K. Wang, F. Huang, Y. Cao, Amino-functionalized conjugated polymer as an efficient electron transport layer for high-performance planar-heterojunction perov- skite solar cells. Adv. Energy Mater. 6, 1501534 (2016)
94.
Y. Yao, G. Wang, L. Liao, D. Liu, G. Zhou, C. Xu, X. Yang, R. Wu, Q. Song, Enhancing the open circuit voltage of PEDOT:PSS-PC61BM based inverted planar mixed halide perovskite solar cells from 0.93 to 1.05 V by simply oxidizing PC61 BM. Org. Electron. 59, 260–265 (2018)
95.
X.Y. Zhou, Y. Zhang, W.G. Kong, M.M. Hu, L.Z. Zhang, C. Liu, X.N. Li, C.Y. Pan, G.P. Yu, C. Cheng, B.M. Xu, Crystallization manipulation and morphology evolution for highly efficient perovskite solar cell fabrication via hydration water induced intermediate phase formation under heat assisted spin-coating. J. Mater. Chem. 6, 3012 (2018)
96.
W.S. Yang, B.W. Park, E.H. Jung, N.J. Jeon, Y.C. Kim, D.U. Lee, S.S. Shin, J.G. Seo, E.K. Kim, J.H. Noh, S.I. Seok, Iodide management in formamidinium–lead–halide-based perovskite layers for efficient solar cells. Science 356, 1376 (2017)
97.
Q. Wang, Y. Shao, Q. Dong, Z. Xiao, Y. Yuan, J.S. Huang, Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process. Energy Environ. Sci. 7, 2359 (2014)
98.
K. Wang, C. Liu, P. Du, J. Zheng, X. Gong, Bulk heterojunction perovskite hybrid solar cells with large fill factor. Energy Environ. Sci. 8, 1245 (2015)
99.
J.W. Lee, H.S. Kim, N.G. Park, Lewis acid–base adduct approach for high efficiency perovskite solar cells. Acc. Chem. Res. 49, 311 (2016)
100.
C. Liu, K. Wang, P. Du, C. Yi, T. Meng, X. Gong, Efficient solution-processed bulk heterojunction perovskite hybrid solar cells. Adv. Energy Mater. 5, 1402024 (2015)
101.
C.H. Chiang, Z.L. Tseng, C.G. Wu, Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process. J. Mater. Chem. A 2, 15897 (2014)
102.
M. Wolf, H. Rauschenbach, Series resistance effects on solar cell measurements. Adv. Energy Convers. 3, 455 (1963)
103.
C. Yi, A. Wilhite, L. Zhang, R. Hu, S.S. Chuang, J. Zheng, X. Gong, Enhanced thermoelectric properties of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) by binary secondary dopants. ACS Appl. Mater. Interfaces 7, 8984 (2015)
104.
D. Pysch, A. Mette, S.W. Glunz, A review and comparison of different methods to determine the series resistance of solar cells. Sol. Energy Mater. Sol. Cells 91, 1698 (2007)
105.
X. Huang, K. Wang, C. Yi, T. Meng, X. Gong, Efficient perovskite hybrid solar cells by highly electrical conductive PEDOT: PSS hole transport layer. Adv. Energy Mater. 6, 1501773 (2016)
106.
D.Y. Liu, Y. Li, J.Y. Yuan, Q.M. Hong, G.Z. Shi, D. Yuan, J. Wei, C.C. Huang, J. Tang, M.K. Fung, Improved performance of inverted planar perovskite solar cells with F4-TCNQ doped PEDOT:PSS hole transport layers. J. Mater. Chem. 5, 5701 (2017)
107.
J. Ouyang, C.W. Chu, F.C. Chen, Q. Xu, Y. Yang, High-conductivity poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) film and Its application in polymer optoelectronic devices. Adv. Funct. Mater. 15, 203 (2005)
108.
F.J. Lim, K. Ananthanarayanan, J. Luther, G.W. Ho, Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells. J. Mater. Chem. 22, 25057 (2012)
109.
V.D. Mihailetchi, J.K.V. Duren, P.W. Blom, J.C. Hummelen, R.A. Janssen, J.M. Kroon, M.T. Rispens, W.H. Verhees, M.M. Wienk, Electron transport in a methanofullerene. Adv. Funct. Mater. 13, 43 (2003)
110.
D.-Y. Lee, S.-I. Na, S.-S. Kim, Graphene oxide/PEDOT:PSS composite hole transport layer for efficient and stable planar heterojunction perovskite solar cells. Nanoscale 8, 1513 (2016)
111.
A. Giuri, S. Masi, S. Colella, A. Kovtun, S. Dell’Elce, E. Treossi, A. Liscio, C.E. Corcione, A. Rizzo, A. Listorti, Cooperative effect of go and glucose on pedot:pss for high voc and hysteresis-free solution‐processed perovskite solar cells. Adv. Funct. Mater. 26, 6985 (2016)
112.
D. Huang, T. Goh, J. Kong, Y. Zheng, S. Zhao, Z. Xu, A. Taylor, Perovskite solar cells with a DMSO-treated PEDOT:PSS hole transport layer exhibit higher photovoltaic performance and enhanced durability. Nanoscale 9, 4236 (2017)
113.
L. Hu, K. Sun, M. Wang, W. Chen, B. Yang, J. Fu, Z. Xiong, X. Li, Z. Zang, S. Zhang, L. Sun, M. Li, Inverted planar perovskite solar cells with a high fill factor and negligible hysteresis by the dual effect of NaCl-doped PEDOT:PSS. ACS Appl. Mater. Interfaces 9, 43902 (2017)
114.
L. Xu, Y. Li, C. Zhang, Y. Liu, C. Zheng, W. Lv, M. Li, Y. Chen, W. Huang, R. Chen, Improving the efficiency and stability of inverted perovskite solar cells by CuSCN-doped PEDOT:PSS. Sol. Energy Mater. Sol. Cells 206, 110316 (2020)
115.
W. Li, N. Cheng, Y. Cao, Z. Zhao, Z. Xiao, W. Zi, Z. Sun, Boost the performance of inverted perovskite solar cells with PEDOT:PSS/graphene quantum dots composite hole transporting layer. Org. Electron. 78, 105575 (2019)
116.
D.S. Mann, Y.-H. Seo, S.-N. Kwon, S.-I. Na, Efficient and stable planar perovskite solar cells with a PEDOT:PSS/SrGO hole interfacial layer. J. Alloys Compd. 812, 152091 (2020)
117.
H. Yi, D. Wang, L. Duan, F. Haque, C. Xu, Y. Zhang, G. Conibeer, A. Uddin, Solution-processed WO3 and water-free PEDOT:PSS composite for hole transport layer in conventional perovskite solar cell. Electrochim. Acta 319, 349 (2019)
118.
X. Zhou, M. Hu, C. Liu, L. Zhang, X. Zhong, X. Li, Y. Tian, C. Cheng, B. Xu, Synergistic effects of multiple functional ionic liquid-treated PEDOT:PSS and less-ion-defects S-acetylthiocholine chloride-passivated perovskite surface enabling stable and hysteresis-free inverted perovskite solar cells with conversion efficiency over 20%. Nano Energy 63, 103866 (2019)
119.
Y. Zhu, S. Wang, R. Ma, C. Wang, The improvement of inverted perovskite solar cells by the introduction of CTAB into PEDOT:PSS. Sol. Energy 188, 28 (2019)
120.
Y. Wang, Y. Hu, D. Han, Q. Yuan, T. Cao, N. Chen, D. Zhou, H. Cong, L. Feng, Ammonia-treated graphene oxide and PEDOT:PSS as hole transport layer for high-performance perovskite solar cells with enhanced stability. Org. Electron. 70, 63 (2019)
121.
W. Hu, C.Y. Xu, L. Niu, E.A. Mourtada, G. Wang, D. Liu, Y.Q. Yao, L.P. Liao, G.D. Zhou, Q. Song, High open circuit voltage of 1.134 V for inverted planar perovskite solar cells with sodium citrate doped PEDOT:PSS as a hole transport layer. ACS Appl. Mater. Interfaces 11, 22021 (2019)
122.
R. Zhang, H. Ling, X. Lu, J. Xia, The facile modification of PEDOT:PSS buffer layer by polyethyleneglycol and their effects on inverted perovskite solar cell. Sol. Energy 186, 398 (2019)
123.
L. Hu, J. Fu, K. Yang, Z. Xiong, M. Wang, B. Yang, H. Wang, X. Tang, Z. Zang, M. Li, J. Li, K. Sun, Inhibition of in-plane charge transport in hole transfer layer to achieve high fill factor for inverted planar perovskite solar cells. Solar. RRL 3, 1900104 (2019)
124.
D. Shin, D. Kang, J.-B. Lee, J.-H. Ahn, I.-W. Cho, M.-Y. Ryu, S.W. Cho, N.E. Jung, H. Lee, Y. Yi, Electronic structure of nonionic surfactant-modified PEDOT:PSS and its application in perovskite solar cells with reduced interface recombination. ACS Appl. Mater. Interfaces 11, 17028 (2019)
125.
L. Kegelmann, P. Tockhorn, C.M. Wolff, J.A. Márquez, S. Caicedo-Dávila, L. Korte, T. Unold, W. Lövenich, D. Neher, B. Rech, S. Albrecht, Mixtures of dopant-free Spiro-OMeTAD and water-free PEDOT as passivating hole contact in perovskite solar cells. ACS Appl. Mater. Interfaces 11, 9172 (2019)
126.
P. Fan, D. Zheng, Y. Zheng, J. Yu, Efficient and stable planar p-i-n perovskite solar cells by doping tungsten compound into PEDOT:PSS to facilitate perovskite crystalline. Electrochim. Acta 283, 922 (2018)
127.
H. Li, C. Zhang, Y. Ma, Y. Mai, Y. Xu, Alanine induced structure reconstruction of PEDOT:PSS films in perovskite solar cells. Org. Electron. 62, 468 (2018)
128.
Q. Xiong, H. Tian, J. Zhang, L. Han, C. Lu, B. Shen, Y. Zhang, Y. Zheng, C. Lu, Z. Zeng, Z. Hu, L. Wu, Y. Zhu, CuSCN modified PEDOT:PSS to improve the efficiency of low temperature processed perovskite solar cells. Org. Electron. 61, 151 (2018)
129.
B.J. Bruijnaers, E. Schiepers, C.H.L. Weijtens, S.C.J. Meskers, M.M. Wienk, R.A.J. Janssen, The effect of oxygen on the efficiency of planar p-i-n metal halide perovskite solar cells with a PEDOT:PSS hole transport layer. J. Mater. Chem. A 6, 6882 (2018)
130.
J.-Y. Zhu, K. Niu, M. Li, M.-Q. Lin, J.-H. Li, Z.-K. Wang, PEDOT:PSS-CrO3 composite hole-transporting layer for high-performance p-i-n structure perovskite solar cells. Org. Electron. 54, 9 (2018)
131.
Z. Sun, Y. Xiahou, T. Cao, K. Zhang, Z. Wang, P. Huang, K. Zhu, L. Yuan, Y. Zhou, B. Song, H. Xia, N. Chen, Enhanced p-i-n type perovskite solar cells by doping AuAg@AuAg core-shell alloy nanocrystals into PEDOT:PSS layer. Org. Electron. 52, 309 (2018)
132.
J. Huang, C. Wang, Z. Liu, X. Qiu, J. Yang, J. Chang, Simultaneouly enhanced durability and performance by employing dopamine copolymerized PEDOT with high work function and water-proofness for inverted perovskite solar cells. J. Mater. Chem. C 6, 2311 (2018)
133.
S. Xu, C. Liu, Z. Xiao, W. Zhong, Y. Luo, H. Ou, J. Wiezorek, Cooperative effect of carbon black and dimethyl sulfoxide on PEDOT:PSS hole transport layer for inverted planar perovskite solar cells. Sol. Energy 157, 125–132 (2017)
134.
D. Huang, T. Goh, J. Kong, Y. Zheng, S. Zhao, Z. Xu, A.D. Taylor, Perovskite solar cells with DMSO-treated PEDOT:PSS holetransport layer exhibit higher photovoltaic performance and enhanced durability. Nanoscale 9, 4236–4243 (2017)
135.
D. Wang, N.K. Elumalai, M.A. Mahmud, M. Wright, M.B. Upama, K.H. Chan, C. Xu, F. Haque, G. Conibeer, A. Uddin, V2O5-PEDOT:PSS bilayer as hole transport layer for highly efficient and stable perovskite solar cells. Org. Electron. 53, 66–73 (2018)
136.
H. Luo, X. Lin, X. Hou, L. Pan, S. Huang, X. Chen, Efficient and air-stable planar perovskite solar cells formed on graphene-oxide-modified PEDOT:PSS hole transport layer. Nano Lett. 9, 19–29 (2017)
137.
W. Sun, Y. Li, Y. Xiao, Z. Zhao, S. Ye, H. Rao, H. Ting, Z. Bian, L. Xiao, C. Huang, Z. Chen, An ammonia modified PEDOT: PSS for interfacial engineering in inverted planar perovskite solar cells. Org. Electron. 46, 22–27 (2017)
138.
C. Zuo, L. Ding, Modified PEDOT layer makes a 1.52 V voc for perovskite/PCBM solar cells. Adv. Energy Mater. 7, 1601193 (2017)
139.
G. Adam, M. Kaltenbrunner, E.D. Glowacki, D.H. Apaydin, M.S. White, H. Heilbrunner, S. Tombe, P. Stadler, B. Ernecker, C.W. Klampfl, N.S. Sariciftci, M.C. Scharber, Solution processed perovskite solar cells using highly conductive PEDOT:PSS interfacial layer. Sol. Energy Mater. Sol. Cells 157, 318–325 (2016)
140.
X. Huang, H. Guo, J. Yang, K. Wang, X. Niu, X. Liu, Moderately reduced graphene oxide/PEDOT:PSS as hole transport layer to fabricate efficient perovskite hybrid solar cells. Org. Electron. 39, 288–295 (2016)
141.
A. Giuri, S.A. Masi, S. Colella, A. Kovtun, S. Dell’Elce, E. Treossi, A. Liscio, C.E. Corcione, A. Rizzo, A. Listorti, Cooperative effect of go and glucose on PEDOT:PSS for high voc and hysteresis-free solution-processed perovskite solar cells. Adv. Funct. Mater. 26, 6985–6994 (2016)
142.
C. Liu, Z. Su, W. Li, F. Jin, B. Chu, J. Wang, H. Zhao, C.S. Lee, J. Tang, B. Kang, Improved performance of perovskite solar cells with a TiO2/MoO3 core/shell nanoparticles doped PEDOT:PSS hole-transporter. Org. Electron. 33, 221–226 (2016)
143.
K.M. Reza, A. Gurung, B. Bahrami, S. Mabrouk, H. Elbohy, R. Pathak, K. Chen, A.H. Chowdhury, M.T. Rahman, S. Letourneau, H.-C. Yang, G. Saianand, J.W. Elam, S.B. Darling, Q. Qiao, Tailored PEDOT:PSS hole transport layer for higher performance in perovskite solar cells: Enhancement of electrical and optical properties with improved morphology. J. Energy. Chem. 44, 41–50 (2020)
144.
M. Makha, S.L. Fernandes, S. Jenatsch, T. Offermans, J. Schleuniger, J.-N. Tisserant, A.C. Veron, R. Hany, A transparent, solvent-free laminated top electrode for perovskite solar cells. Sci. Technol. Adv. Mat. 17, 260–266 (2016)
145.
K.M. Kim, S. Ahn, W. Jang, S. Park, O.O. Park, D.H. Wang, Work function optimization of vacuum free top-electrode by PEDOT:PSS/PEI interaction for efficient semi-transparent perovskite solar cells. Sol. Energy Mater. Sol. Cells 176, 435–440 (2018)
Metadaten
Titel
Review on applications of PEDOTs and PEDOT:PSS in perovskite solar cells
verfasst von
Yijie Xia
Shuyang Dai
Publikationsdatum
05.05.2020
Verlag
Springer US
Erschienen in
Journal of Materials Science: Materials in Electronics / Ausgabe 10/2021
Print ISSN: 0957-4522
Elektronische ISSN: 1573-482X
DOI
https://doi.org/10.1007/s10854-020-03473-w

Weitere Artikel der Ausgabe 10/2021

Journal of Materials Science: Materials in Electronics 10/2021 Zur Ausgabe

OriginalPaper

Synthesis and characterization of platinum multi-walled carbon nanotubes nanocomposite film electrode

OriginalPaper

Dielectric properties of poly(vinylidene fluoride)-based nanocomposites containing a LaFeO3 nanoparticle filler

OriginalPaper

Probing reversal of orbital symmetry in CaCu3-xTi4-xFe2xO12 (x = 0.0–0.7) by X-ray absorption spectroscopy

OriginalPaper

Enhanced piezoelectric and energy storage performance of 0.96(K0.48Na0.48Li0.04)(Nb0.95Sb0.05)O3–0.04Bi0.5(Na0.82K0.18)0.5ZrO3 ceramics using two-step sintering method

OriginalPaper

Green synthesis and evaluation of antiangiogenic, photocatalytic, and electrochemical activities of BiVO4 nanoparticles

OriginalPaper

Effects of NiO addition on structure and dielectric properties of BaTiO3-based ceramics

Neuer Inhalt

    Bildnachweise