nach oben

Journal of Materials Science

Erschienen in:

20.12.2023 | Processing Bulk Nanostructured Materials

Review: recent advances using severe plastic deformation to improve the properties of battery materials

verfasst von: Mohammad Zohrevand, Nafiseh Hassanzadeh, Reza Alizadeh, Terence G. Langdon

Erschienen in: Journal of Materials Science | Ausgabe 14/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Severe plastic deformation (SPD) techniques are capable of achieving improved properties in materials by modifying the microstructures through the application of large plastic strains. Generally, a more uniform and refined microstructure is obtained after SPD while specific crystallographic textures may also develop depending on the material and processing route. In this study, the SPD procedures employed so far for the processing of battery materials are reviewed, where this is mainly for Zn-, Li-, Mg- and Al-based batteries. Among the various SPD techniques, high-pressure torsion, equal-channel angular pressing, accumulative roll bonding, friction stir processing and deformation-driven metallurgy are all of special interest for conveniently processing battery materials. This review demonstrates that there is an important potential for making use of SPD techniques in the production of battery materials having improved properties and especially in the application of these procedures for fabricating metallic electrodes.

Vorheriger Artikel Preface to the special issue: Processing bulk nanostructured materials

Nächster Artikel Review: nanoSPD-produced metallic materials for advanced medical devices

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Mokhtar M, Talib MZM, Majlan EH, Tasirin SM, Ramli WMFW, Daud WRW, Sahari J (2015) Recent developments in materials for aluminum-air batteries: a review. J Ind Eng Chem 32:1–20. https://doi.org/10.1016/j.jiec.2015.08.004CrossRef

Palacín MR, De Guibert A (2016) Batteries: Why do batteries fail? Science 351(6273):1253292. https://doi.org/10.1126/science.1253292CrossRefPubMed

Kittner N, Lill F, Kammen DM (2017) Energy storage deployment and innovation for the clean energy transition. Nat Energy 2(9):1–6. https://doi.org/10.1038/nenergy.2017.125CrossRef

Jiang X, Chen Y, Meng X, Cao W, Liu C, Huang Q, Naik N, Murugadoss V, Huang M, Guo Z (2022) The impact of electrode with carbon materials on safety performance of lithium-ion batteries: a review. Carbon 191:448–470. https://doi.org/10.1016/j.carbon.2022.02.011CrossRef

Li M, Lu J, Chen Z, Amine K (2018) 30 years of lithium-ion batteries. Adv Mater 30:1–24. https://doi.org/10.1002/adma.201800561CrossRef

Wang HF, Xu Q (2019) Materials design for rechargeable metal-air batteries. Matter 1:565–595. https://doi.org/10.1016/j.matt.2019.05.008CrossRef

Deng J, Bae C, Denlinger A, Miller T (2020) Electric vehicles batteries: requirements and challenges. Joule 4:511–515. https://doi.org/10.1016/j.joule.2020.01.013CrossRef

Goodenough JB, Park KS (2013) The Li-ion rechargeable battery: a perspective. J Am Chem Soc 135:1167–1176. https://doi.org/10.1021/ja3091438CrossRefPubMed

Pan J, Xu YY, Yang H, Dong Z, Liu H, Xia BY (2018) Advanced architectures and relatives of air electrodes in Zn–air batteries. Adv Sci 5(4):1700691. https://doi.org/10.1002/advs.201700691CrossRef

10.

Yu J, Li BQ, Zhao CX, Zhang Q (2020) Seawater electrolyte-based metal-air batteries: from strategies to applications. Energy Environ Sci 13:3253–3268. https://doi.org/10.1039/d0ee01617aCrossRef

11.

Nitta N, Wu F, Lee JT, Yushin G (2015) Li-ion battery materials: present and future. Mater Today 18:252–264. https://doi.org/10.1016/j.mattod.2014.10.040CrossRef

12.

Shan C, Qin Z, Xie Y, Meng X, Chen J, Chang Y, Zang R, Wan L, Huang Y (2023) Cu-CNTs current collector fabricated by deformation-driven metallurgy for anode-free Li metal batteries. Carbon 204:367–376. https://doi.org/10.1016/j.carbon.2022.12.074CrossRef

13.

Hassanzadeh N, Sadrnezhaad SK (2021) Magnetic stirring assisted hydrothermal synthesis of Na₃MnCO₃PO₄ cathode material for sodium-ion battery. Ceram Int 47:26929–26934. https://doi.org/10.1016/j.ceramint.2021.06.104CrossRef

14.

Daya A, Paul Sathiyan S (2022) Review on Li-ion based battery chemistry: challenges and opportunities. IOP Conf Ser Mater Sci Eng 1258:012041. https://doi.org/10.1088/1757-899x/1258/1/012041CrossRef

15.

Zhang P, Liu X, Xue J, Jiang K (2020) The role of microstructural evolution in improving energy conversion of Al-based anodes for metal-air batteries. J Power Sources 451:227806. https://doi.org/10.1016/j.jpowsour.2020.227806CrossRef

16.

Hassanzadeh N, Sadrnezhaad SK, Chen G (2016) In-situ hydrothermal synthesis of Na₃MnCO₃PO₄/rGO hybrid as a cathode for Na-ion battery. Electrochim Acta 208:188–194. https://doi.org/10.1016/j.electacta.2016.05.028CrossRef

17.

Hassanzadeh N, Sadrnezhaad SK, Chen G (2016) Ball mill assisted synthesis of Na₃MnCO₃PO₄ nanoparticles anchored on reduced graphene oxide for sodium ion battery cathodes. Electrochim Acta 220:683–689. https://doi.org/10.1016/j.electacta.2016.10.160CrossRef

18.

Liu Q, Pan Z, Wang E, An L, Sun G (2020) Aqueous metal-air batteries: fundamentals and applications. Energy Storage Mater 27:478–505. https://doi.org/10.1016/j.ensm.2019.12.011CrossRef

19.

Zhang J, Chang Z, Zhang Z, Du A, Dong S, Li Z, Li G, Cui G (2021) Current design strategies for rechargeable magnesium-based batteries. ACS Nano 15:15594–15624. https://doi.org/10.1021/acsnano.1c06530CrossRefPubMed

20.

Xie Y, Meng X, Qin Z, Chang Y, Mao D, Wan L, Huang Y (2022) Reversible passivation in primary aluminum-air batteries via composite anodes. Energy Storage Mater 49:537–545. https://doi.org/10.1016/j.ensm.2022.05.004CrossRef

21.

Chen Y, Kang Y, Zhao Y, Wang L, Liu J, Li Y, Liang Z, He X, Li X, Tavajohi N et al (2021) A review of lithium-ion battery safety concerns: the issues, strategies, and testing standards. J Energy Chem 59:83–99. https://doi.org/10.1016/j.jechem.2020.10.017CrossRef

22.

Li J, Zhang B, Wei Q, Wang N, Hou B (2017) Electrochemical behavior of Mg–Al–Zn–In alloy as anode materials in 3.5 wt.% NaCl solution. Electrochim Acta 238:156–167. https://doi.org/10.1016/j.electacta.2017.03.119CrossRef

23.

Qi G, Qiu Y (2009) The effect of heat treatment on element distribution and electrochemical properties of Al–Zn–In anodes. Anti-Corrosion Methods Mater 56:306–309. https://doi.org/10.1108/00035590911000278CrossRef

24.

Wang N, Wang R, Peng C, Feng Y, Chen B (2012) Effect of hot rolling and subsequent annealing on electrochemical discharge behavior of AP65 magnesium alloy as anode for seawater activated battery. Corros Sci 64:17–27. https://doi.org/10.1016/j.corsci.2012.06.024CrossRef

25.

Xie Q, Ma A, Jiang J, Li Y, Wang J, Wang L, Klu EE (2020) Effects of microstructure evolution on discharge properties of AZ31 alloy as anode for seawater battery. Mater Corros 71:1462–1472. https://doi.org/10.1002/maco.202011598CrossRef

26.

Gu Y, Jiang J, Xie Q, Ma A, Gao Z (2022) Improved discharge performance of equal-channel-angular-pressed AZ61-In alloys as anodes for seawater-activated batteries. J Alloys Compd 890:161809. https://doi.org/10.1016/j.jallcom.2021.161809CrossRef

27.

Zohrevand M, Mohammadi-Zerankeshi M, Nobakht-Farin F, Alizadeh R, Mahmudi R (2022) Degradation behavior of the as-extruded and ECAP-processed Mg-4Zn alloy by Ca addition and hydrothermal coating. J Mater Res Technol 20:1204–1215. https://doi.org/10.1016/j.jmrt.2022.07.072CrossRef

28.

Valiev R (2004) Nanostructuring of metals by severe plastic deformation for advanced properties. Nat Mater 3:511–516. https://doi.org/10.1038/nmat1180CrossRefPubMed

29.

Emerla M, Bazarnik P, Huang Y, Lewandowska M, Langdon TG (2023) Using direct high-pressure torsion synthesis to produce aluminium matrix nanocomposites reinforced with carbon nanotubes. J Alloys Compd 968:171928. https://doi.org/10.1016/j.jallcom.2023.171928CrossRef

30.

Hashemi M, Alizadeh R, Langdon TG (2023) Recent advances using equal-channel angular pressing to improve the properties of biodegradable Mg–Zn alloys. J Magnes Alloy 11:2260–2284. https://doi.org/10.1016/j.jma.2023.07.009CrossRef

31.

Langdon TG (2013) Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement. Acta Mater 61:7035–7059. https://doi.org/10.1016/j.actamat.2013.08.018CrossRef

32.

Asadollahi M, Gerashi E, Alizadeh R, Mahmudi R (2022) Effect of Zn content and processing route on the microstructure, mechanical properties, and bio-degradation of Mg–Zn alloys. J Mater Res Technol 21:4473–4489. https://doi.org/10.1016/j.jmrt.2022.11.041CrossRef

33.

Gerashi E, Alizadeh R, Mahmudi R (2022) Improved corrosion resistance and mechanical properties of biodegradable Mg-4Zn-xSr alloys: effects of heat treatment, Sr additions, and multi-directional forging. J Mater Res Technol 20:3363–3380. https://doi.org/10.1016/j.jmrt.2022.08.072CrossRef

34.

Paniagua Rojas J, González-Hernández JE, Cubero-Sesin JM, Horita Z, González-Flores D (2023) Benchmarking of aluminum alloys processed by high-pressure torsion: Al-3% Mg alloy for high-energy density Al-air batteries. Energy Fuels 37:4632–4640. https://doi.org/10.1021/acs.energyfuels.2c03722CrossRef

35.

Zohrevand M, Alizadeh R, Mahmudi R (2023) Using different strategies to improve properties of the biodegradable Mg–4Li–4Zn alloy. J Mater Res Technol 27:2066–2079. https://doi.org/10.1016/j.jmrt.2023.10.059CrossRef

36.

Bachmaier A, Pippan R (2012) Generation of metallic nanocomposites by severe plastic deformation. Int Mater Rev 58(1):41–62. https://doi.org/10.1179/1743280412Y.0000000003CrossRef

37.

Aghamohammadi H, Hassanzadeh N, Eslami-Farsani R (2021) A review study on the recent advances in developing the heteroatom-doped graphene and porous graphene as superior anode materials for Li-ion batteries. Ceram Int 47:22269–22301. https://doi.org/10.1016/j.ceramint.2021.05.048CrossRef

38.

Wang JT (2006) Historic retrospection and present status of severe plastic deformation in China. Mater Sci Forum 503–504:363–370. https://doi.org/10.4028/www.scientific.net/MSF.503-504.363CrossRef

39.

Valiev RZ, Xia K, Langdon TG (2009) Processing by severe plastic deformation:an ancient skill adapted for the modern world. Int J Mater Res 100:1623–1631. https://doi.org/10.3139/146.110233CrossRef

40.

Langdon TG (2011) Processing by severe plastic deformation: historical developments and current impact. Mater Sci Forum 667–669:9–14. https://doi.org/10.4028/www.scientific.net/MSF.667-669.9CrossRef

41.

Edalati K, Bachmaier A, Beloshenko VA, Beygelzimer Y, Blank VD, Botta WJ, Bryła K, Čižek J, Divinski S, Enikeev NA (2022) others, Nanomaterials by severe plastic deformation: review of historical developments and recent advances. Mater Res Lett 10:163–256. https://doi.org/10.1080/21663831.2022.2029779CrossRef

42.

Bridgman PW (1964) Studies in large plastic flow and fracture: with special emphasis on the effects of hydrostatic pressure. Harvard Univ Press, Cambridge, MA and London, England. https://doi.org/10.4159/harvard.9780674731349CrossRef

43.

Valiev RZ, Estrin Y, Horita Z, Langdon TG, Zehetbauer MJ, Zhu YT (2006) Producing bulk ultrafine-grained materials by severe plastic deformation. JOM 58(4):33–39. https://doi.org/10.1007/s11837-006-0213-7CrossRef

44.

Valiev RZ, Islamgaliev RK, Alexandrov IV (2000) Bulk nanostructured materials from severe plastic deformation. Prog Mater Sci 45:103–189. https://doi.org/10.1016/S0079-6425(99)00007-9CrossRef

45.

Edalati K (2019) Metallurgical alchemy by ultra-severe plastic deformation via high-pressure torsion process. Mater Trans 60:1221–1229. https://doi.org/10.2320/matertrans.MF201914CrossRef

46.

Segal V (2018) Modes and processes of severe plastic deformation (SPD). Materials (Basel) 11:1175. https://doi.org/10.3390/ma11071175CrossRefPubMed

47.

Kwon Y-J, Shigematsu I, Saito N (2003) Production of ultra-fine grained aluminum alloy using friction stir process. Mater Trans 44:1343–1350. https://doi.org/10.2320/matertrans.44.1343CrossRef

48.

Xie Y, Meng X, Li Y, Mao D, Wan L, Huang Y (2021) Insight into ultra-refined grains of aluminum matrix composites via deformation-driven metallurgy. Compos Commun 26:1–4. https://doi.org/10.1016/j.coco.2021.100776CrossRef

49.

Xu C, Horita Z, Langdon TG (2008) The evolution of homogeneity in an aluminum alloy processed using high-pressure torsion. Acta Mater 56:5168–5176. https://doi.org/10.1016/j.actamat.2008.06.036CrossRef

50.

Zhilyaev AP, Langdon TG (2008) Using high-pressure torsion for metal processing: fundamentals and applications. Prog Mater Sci 53:893–979. https://doi.org/10.1016/j.pmatsci.2008.03.002CrossRef

51.

Valiev RZ, Langdon TG (2006) Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci 51:881–981. https://doi.org/10.1016/j.pmatsci.2006.02.003CrossRef

52.

Iwahashi Y, Wang J, Horita Z, Nemoto M, Langdon TG (1996) Principle of equal-channel angular pressing for the processing of ultra-fine grained materials. Scr Mater 35:143–146. https://doi.org/10.1016/1359-6462(96)00107-8CrossRef

53.

Horita Z, Fujinami T, Langdon TG (2001) The potential for scaling ECAP: Effect of sample size on grain refinement and mechanical properties. Mater Sci Eng A Struct Mater Prop Microstruct Process 318:34–41. https://doi.org/10.1016/S0921-5093(01)01339-9CrossRef

54.

Srinivasan R, Cherukuri B, Chaudhury P (2006) Scaling up of Equal channel angular pressing (ECAP) for the production of forging stock. Mater Sci Forum 503:371–378. https://doi.org/10.4028/www.scientific.net/MSF.503-504.371CrossRef

55.

Frint S, Hockauf M, Frint P, Wagner M (2016) Scaling up Segal’s principle of equal-channel angular pressing. Mater Des 907:502–511. https://doi.org/10.1016/j.matdes.2016.02.067CrossRef

56.

Gu RC, Jiang Y, Liu YW, Liu Y, Liu F, Wang JT (2021) Exploring the size effect in scaling up ECAP using the theory of similarity. J Mater Process Technol 298:117290. https://doi.org/10.1016/j.jmatprotec.2021.117290CrossRef

57.

Raab GJ, Valiev RZ, Lowe TC, Zhu YT (2004) Continuous processing of ultrafine grained Al by ECAP-Conform. Mater Sci Eng A 382:30–34. https://doi.org/10.1016/j.msea.2004.04.021CrossRef

58.

Xu C, Schroeder S, Berbon PB, Langdon TG (2010) Principles of ECAP-Conform as a continuous process for achieving grain refinement: Application to an aluminum alloy. Acta Mater 58:1379–1386. https://doi.org/10.1016/j.actamat.2009.10.044CrossRef

59.

Saito Y, Tsuji N, Utsunomiya H, Sakai T, Hong RG (1998) Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process. Scr Mater 39:1221–1227. https://doi.org/10.1016/S1359-6462(98)00302-9CrossRef

60.

Saito Y, Utsunomiya H, Tsuji N, Sakai T (1999) Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process. Acta Mater 47:579–583. https://doi.org/10.1016/S1359-6454(98)00365-6CrossRef

61.

Jiang L, Pérez-Prado MT, Gruber PA, Arzt E, Ruano OA, Kassner ME (2008) Texture, microstructure and mechanical properties of equiaxed ultrafine-grained Zr fabricated by accumulative roll bonding. Acta Mater 56:1228–1242. https://doi.org/10.1016/j.actamat.2007.11.017CrossRef

62.

Suwas S, Mondal S (2019) Texture evolution in severe plastic deformation processes. Mater Trans 60:1457–1471. https://doi.org/10.2320/matertrans.MF201933CrossRef

63.

Sabirov I, Murashkin MY, Valiev RZ (2013) Nanostructured aluminium alloys produced by severe plastic deformation: new horizons in development. Mater Sci Eng A 560:1–24. https://doi.org/10.1016/j.msea.2012.09.020CrossRef

64.

Ma ZY (2008) Friction stir processing technology: a review. Metall Mater Trans A 39:642–658. https://doi.org/10.1007/s11661-007-9459-0CrossRef

65.

Xie Y, Meng X, Chang Y, Mao D, Yang Y, Xu Y, Wan L, Huang Y (2022) Ameliorating strength-ductility efficiency of graphene nanoplatelet-reinforced aluminum composites via deformation-driven metallurgy. Compos Sci Technol 219:109225. https://doi.org/10.1016/j.compscitech.2021.109225CrossRef

66.

Xie Y, Meng X, Mao D, Chang Y, Qin Z, Ma X, Wan L, Huang Y (2022) Deformation-driven modification of Al–Li–Mg–Zn–Cu high-alloy aluminum as anodes for primary aluminum-air batteries. Scr Mater 212:114551. https://doi.org/10.1016/j.scriptamat.2022.114551CrossRef

67.

Xie Y, Meng X, Huang Y, Li J, Cao J (2019) Deformation-driven metallurgy of graphene nanoplatelets reinforced aluminum composite for the balance between strength and ductility. Compos Part B Eng 177:107413. https://doi.org/10.1016/j.compositesb.2019.107413CrossRef

68.

Huang Y, Langdon TG (2013) Advances in ultrafine-grained materials. Mater Today 16:85–93. https://doi.org/10.1016/j.mattod.2013.03.004CrossRef

69.

Zheng X, Zhang T, Yang H, Zheng Q, Gao Y, Liu Z, Wang W, Wang K (2020) Friction stir processing induced elctrochemical performance improvement of commercial Al for Al-air battery. Electrochim Acta 354:136635. https://doi.org/10.1016/j.electacta.2020.136635CrossRef

70.

Wang T, Sun J, Hua Y, Krishna BNV, Xi Q, Ai W, Yu JS (2022) Planar and dendrite-free zinc deposition enabled by exposed crystal plane optimization of zinc anode. Energy Storage Mater 53:273–304. https://doi.org/10.1016/j.ensm.2022.08.046CrossRef

71.

Wu S, Hu Z, He P, Ren L, Huang J, Luo J (2023) Crystallographic engineering of Zn anodes for aqueous batteries. EScience 3:100120. https://doi.org/10.1016/j.esci.2023.100120CrossRef

72.

Chen Z, Zhao J, He Q, Li M, Feng S, Wang Y, Yuan D, Chen J, Alshareef HN, Ma Y (2022) Texture control of commercial Zn foils prolongs their reversibility as aqueous battery anodes. ACS Energy Lett 7:3564–3571. https://doi.org/10.1021/acsenergylett.2c01920CrossRef

73.

Chu Y, Ren L, Hu Z, Huang C, Luo J (2022) An in-depth understanding of improvement strategies and corresponding characterizations towards Zn anode in aqueous Zn-ions batteries, Green. Energy Environ 8:1006–1042. https://doi.org/10.1016/j.gee.2022.04.008CrossRef

74.

Zhou M, Guo S, Li J, Luo X, Liu Z, Zhang T, Cao X, Long M, Lu B, Pan A, Fang G, Zhou J, Liang S (2021) Surface-preferred crystal plane for a stable and reversible zinc anode. Adv Mater 33:1–9. https://doi.org/10.1002/adma.202100187CrossRef

75.

Zheng J, Deng Y, Yin J, Tang T, Garcia-Mendez R, Zhao Q, Archer LA (2022) Textured electrodes: manipulating built-in crystallographic heterogeneity of metal electrodes via severe plastic deformation. Adv Mater 34:1–10. https://doi.org/10.1002/adma.202106867CrossRef

76.

Zhang L, Zhu C, Yu S, Ge D, Zhou H (2022) Status and challenges facing representative anode materials for rechargeable lithium batteries. J Energy Chem 66:260–294. https://doi.org/10.1016/j.jechem.2021.08.001CrossRef

77.

Aghamohammadi H, Hassanzadeh N, Eslami-Farsani R (2021) A review study on titanium niobium oxide-based composite anodes for Li-ion batteries: synthesis, structure, and performance. Ceram Int 47:26598–26619. https://doi.org/10.1016/j.ceramint.2021.06.127CrossRef

78.

Aghamohammadi H, Hassanzadeh N, Eslami-Farsani R (2022) A comprehensive review study on pure titanium niobium oxide as the anode material for Li-ion batteries. J Alloys Compd 911:165117. https://doi.org/10.1016/j.jallcom.2022.165117CrossRef

79.

Qiao Y, Yang H, Chang Z, Deng H, Li X, Zhou H (2021) A high-energy-density and long-life initial-anode-free lithium battery enabled by a Li2O sacrificial agent. Nat Energy 6:653–662. https://doi.org/10.1038/s41560-021-00839-0CrossRef

80.

Xie Z, Wu Z, An X, Yue X, Wang J, Abudula A, Guan G (2020) Anode-free rechargeable lithium metal batteries: progress and prospects. Energy Storage Mater 32:386–401. https://doi.org/10.1016/j.ensm.2020.07.004CrossRef

81.

Fan H, Chen B, Li S, Yu Y, Xu H, Jiang M, Huang Y, Li J (2020) Nanocrystalline Li–Al–Mn–Si foil as reversible li host: electronic percolation and electrochemical cycling stability. Nano Lett 20:896–904. https://doi.org/10.1021/acs.nanolett.9b03626CrossRefPubMed

82.

Hu Y, Li H, Chen Z, Cen W, Wang Q, Chen Y, Davoodi A, Liu W (2023) Li-Alloy texture creates in-built Li(110) epitaxy in a thin Li-metal anode allowing high depth-of-discharge cycling in carbonate electrolyte. Chem Eng J 466:143084. https://doi.org/10.1016/j.cej.2023.143084CrossRef

83.

Hu X, Gao Y, Zhang B, Shi L, Li Q (2022) Superior cycle performance of Li metal electrode with 110 surface texturing. EcoMat 4:1–13. https://doi.org/10.1002/eom2.12264CrossRef

84.

Liu S, Deng L, Guo W, Zhang C, Liu X, Luo J (2019) Bulk nanostructured materials design for fracture-resistant lithium metal anodes. Adv Mater 31:1–7. https://doi.org/10.1002/adma.201807585CrossRef

85.

Pishgahinejad S, Aghamohammadi H, Hassanzadeh N (2023) Copper-coated graphite electrodes for the facile preparation of copper oxide particles anchored on functionalized holey graphene sheets. J Electroanal Chem 931:117204. https://doi.org/10.1016/j.jelechem.2023.117204CrossRef

86.

Mozaffarpour F, Hassanzadeh N, Vahidi E (2023) Synthesis, characterization and life cycle assessment of electrochemically exfoliated KOH-activated holey graphene. Front Environ Sci Eng 17(12):155. https://doi.org/10.1007/s11783-023-1755-4CrossRef

87.

Jeong HT, Jang J, Lee DG, Lee D, Kim WJ (2023) Grain size and hardness: key parameters for enhancing the chemo-mechanical stability of lithiated aluminum foil anodes. J Alloys Compd 965:171279. https://doi.org/10.1016/j.jallcom.2023.171279CrossRef

88.

Qian C, He Z, Liang C, Cha Y, Ji W (2020) Superior intracluster conductivity of metallic lithium-ion battery anode achieved by high-pressure torsion. Mater Lett 260:126933. https://doi.org/10.1016/j.matlet.2019.126933CrossRef

89.

Kreder KJ, Heligman BT, Manthiram A (2017) Interdigitated eutectic alloy foil anodes for rechargeable batteries. ACS Energy Lett 2:2422–2423. https://doi.org/10.1021/acsenergylett.7b00844CrossRef

90.

Heligman BT, Iii JK, Heligman BT, Joseph K, Iii K, Manthiram A (2019) Zn–Sn Interdigitated eutectic alloy anodes with high volumetric capacity for lithium-ion batteries Zn–sn interdigitated eutectic alloy anodes with high volumetric capacity for lithium-ion batteries. Joule 3(4):1051–1063. https://doi.org/10.1016/j.joule.2019.01.005CrossRef

91.

Qian C, He Z, Liang C, Ji W (2018) New in situ synthesis method for Fe₃O₄/flake graphite nanosheet composite structure and its application in anode materials of lithium-ion batteries. J Nanomater 2018:2417949. https://doi.org/10.1155/2018/2417949CrossRef

92.

Wang M, Zhang F, Chen L, Xu B, Cui Z, Edalati K (2021) Influence of Cu doping and high-pressure torsion on electrochemical performance of lithium-rich cathode material. J Phys Conf Ser 1750:012077. https://doi.org/10.1088/1742-6596/1750/1/012077CrossRef

93.

Tian HK, Jalem R, Matsui M, Mandai T, Somekawa H, Tateyama Y (2021) Tuning the performance of a Mg negative electrode through grain boundaries and alloying toward the realization of Mg batteries. J Mater Chem A 9:15207–15216. https://doi.org/10.1039/d1ta02419aCrossRef

94.

Chen X, Zou Q, Shi Z, Le Q, Zhang M, Atrens A (2022) The discharge performance of an as-extruded Mg–Zn–La–Ce anode for the primary Mg-air battery. Electrochim Acta 404:139763. https://doi.org/10.1016/j.electacta.2021.139763CrossRef

95.

Hassanzadeh N, Langdon TG (2023) Invited viewpoint: biodegradable Mg batteries. J Mater Sci 58:13721–13743. https://doi.org/10.1007/s10853-023-08828-2CrossRef

96.

Jiang P, Li D, Hou R, Yang H, Yang J, Zhu S, Wang L, Guan S (2023) A micro-alloyed Mg–Zn–Ge alloy as promising anode for primary Mg-air batteries. J Magnes Alloy. https://doi.org/10.1016/j.jma.2023.05.004CrossRef

97.

Deng M, Höche D, Lamaka SV, Snihirova D, Zheludkevich ML (2018) Mg-Ca binary alloys as anodes for primary Mg-air batteries. J Power Sources 396:109–118. https://doi.org/10.1016/j.jpowsour.2018.05.090CrossRef

98.

Shangguan F, Cheng W, Chen Y, Yu H, Wang L, Li H, Wang H, Wang J (2023) Elucidating the dependence of electrochemical behavior and discharge performance on the grain structure of lean Mg-0.3Bi-0.3Ag-0.3In anodes in primary Mg-air battery. J Power Sources 564:232856. https://doi.org/10.1016/j.jpowsour.2023.232856CrossRef

99.

Xie Q, Ma A, Jiang J, Liu H, Saleh B (2021) Discharge properties of ECAP processed AZ31—Ca alloys as anodes for seawater-activated battery. J Mater Res Technol 11:1031–1044. https://doi.org/10.1016/j.jmrt.2021.01.076CrossRef

100.

Wang N, Mu Y, Xiong W, Zhang J, Li Q, Shi Z (2018) Effect of crystallographic orientation on the discharge and corrosion behaviour of AP65 magnesium alloy anodes. Corros Sci 144:107–126. https://doi.org/10.1016/j.corsci.2018.08.003CrossRef

101.

Gerashi E, Alizadeh R, Langdon TG (2022) Effect of crystallographic texture and twinning on the corrosion behavior of Mg alloys: a review. J Magnes Alloy 10:313–325. https://doi.org/10.1016/j.jma.2021.09.009CrossRef

102.

Kasaeian-Naeini M, Sedighi M, Hashemi R (2021) Severe plastic deformation (SPD) of biodegradable magnesium alloys and composites: A review of developments and prospects. J Magnes Alloy 10(4):938–955. https://doi.org/10.1016/j.jma.2021.11.006CrossRef

103.

Wang N, Mu Y, Li Q, Shi Z (2017) Discharge and corrosion behaviour of AP65 magnesium anode plates with different rolling reductions. RSC Adv 7:53226–53235. https://doi.org/10.1039/c7ra10652aCrossRef

104.

Wang N, Li W, Huang Y, Wu G, Hu M, Li G, Shi Z (2019) Wrought Mg-Al-Pb-RE alloy strips as the anodes for Mg-air batteries. J Power Sources 436:226855. https://doi.org/10.1016/j.jpowsour.2019.226855CrossRef

105.

Fan L, Lu H, Leng J (2015) Performance of fine structured aluminum anodes in neutral and alkaline electrolytes for Al-air batteries. Electrochim Acta 165:22–28. https://doi.org/10.1016/j.electacta.2015.03.002CrossRef

106.

Fan L, Lu H, Leng J, Sun Z, Chen C (2015) The effect of crystal orientation on the aluminum anodes of the aluminum-air batteries in alkaline electrolytes. J Power Sources 299:66–69. https://doi.org/10.1016/j.jpowsour.2015.08.095CrossRef

107.

Khamnantha P, Linjee S, Palsson NS, Banjongprasert C (2019) Microstructure and electrochemical study of equal channel angular pressed Al-Zn alloys. J Phys Conf Ser 1380(1):012147. https://doi.org/10.1088/1742-6596/1380/1/012147CrossRef

108.

Linjee S, Moonngam S, Klomjit P, Pålsson NS, Banjongprasert C (2022) Corrosion behaviour improvement from the ultrafine-grained Al–Zn–In– alloys in Al–air battery. Energy Rep 8:5117–5128. https://doi.org/10.1016/j.egyr.2022.03.132CrossRef

Titel: Review: recent advances using severe plastic deformation to improve the properties of battery materials
verfasst von: Mohammad Zohrevand
Nafiseh Hassanzadeh
Reza Alizadeh
Terence G. Langdon
Publikationsdatum: 20.12.2023
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 14/2024
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-023-09198-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 14/2024

Review: nanoSPD-produced metallic materials for advanced medical devices

Effect of pre-annealing on the formation of the ω-phase in the Ti-2 wt%V alloy after high-pressure torsion

The mechanics of the friction-assisted lateral extrusion process

Strain-rate sensitivity maps and the estimation of ductility for low temperature superplasticity

An experimental and crystal plasticity simulation study on kink band-assisted grain fragmentation during high-pressure torsion of (CrFeNi)99Si1 medium-entropy alloy

Decrease of steady-state solubility of Ag in Cu by high-pressure torsion at low temperature

Premium Partner

Marktübersichten