Skip to main content
Erschienen in: Mechanics of Composite Materials 3/2013

01.07.2013

Rheological Behavior of Bentonite-Polyester Dispersions

verfasst von: Basim Abu-Jdayil, Salah Addin Al-Omari

Erschienen in: Mechanics of Composite Materials | Ausgabe 3/2013

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The rheological behavior of a bentonite clay dispersed in unsaturated polyester was investigated. The effects of the solid content and particle size on the steady and transient rheological properties of the dispersions were studied. In addition, two types of bentonite with different Na+/Ca+2 ratio were used in this study. The Herschel–Bulkley and the Weltman models were used to describe the apparent viscosity of the bentonite-polyester composite in relation to the shear rate and shearing time. The bentonite-polyester dispersions were found to exhibit both Newtonian and non-Newtonian behavior. The transition from a Newtonian to a Bingham plastic and then to a shear-thinning material with a yield stress was found to depend on the solid concentration, the particle size, and the type of bentonite. At a low solid content, the apparent viscosity of the bentonite dispersion increased linearly with solid concentration. But a dramatic increase in the apparent viscosity beyond a solid content of 20 wt.% was observed. On the other hand, a thixotropic behavior was detected in bentonite-polyester dispersions with a high solid content and a low particle size. However, this behavior was more pronounced in dispersions with a high Na+/Ca+2 ratio.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat T. Koyama, S. Tanoue Y. Iemoto, T. Maekawa, and T. Unryu, “Melt compounding of various polymers with organoclay by shear flow,” Polymer Composites, 30, 1065–1073 (2009).CrossRef T. Koyama, S. Tanoue Y. Iemoto, T. Maekawa, and T. Unryu, “Melt compounding of various polymers with organoclay by shear flow,” Polymer Composites, 30, 1065–1073 (2009).CrossRef
2.
Zurück zum Zitat T. Kleining, G. T. Churchman, D. J. Chittleborough, and B. R. Saunders, “Study of polymer-clay composite particles: Preparation, properties and potential applications,” Plastics, Rubber and Composites, 32, 224–229 (2003).CrossRef T. Kleining, G. T. Churchman, D. J. Chittleborough, and B. R. Saunders, “Study of polymer-clay composite particles: Preparation, properties and potential applications,” Plastics, Rubber and Composites, 32, 224–229 (2003).CrossRef
3.
Zurück zum Zitat Z. Ajji, “Preparation of polyester/gypsum/composite using gamma radiation, and its radiation stability,” Radiation Physics and Chemistry, 73, 183–187 (2005).CrossRef Z. Ajji, “Preparation of polyester/gypsum/composite using gamma radiation, and its radiation stability,” Radiation Physics and Chemistry, 73, 183–187 (2005).CrossRef
4.
Zurück zum Zitat F. J. Galindo-Rosales and F. J. Rubio-Hernández, “Structural breakdown and build-up in bentonite dispersions,” Applied Clay Sci., 33, 109–115 (2006).CrossRef F. J. Galindo-Rosales and F. J. Rubio-Hernández, “Structural breakdown and build-up in bentonite dispersions,” Applied Clay Sci., 33, 109–115 (2006).CrossRef
5.
Zurück zum Zitat M. R. Ismail, M. A. M. Ali, A. A. El-Milligy, and M. S. Afifi, “Studies on sand/clay unsaturated polyester composite materials,” J. Appl. Polym. Sci., 72, 1031–1038 (1999).CrossRef M. R. Ismail, M. A. M. Ali, A. A. El-Milligy, and M. S. Afifi, “Studies on sand/clay unsaturated polyester composite materials,” J. Appl. Polym. Sci., 72, 1031–1038 (1999).CrossRef
6.
Zurück zum Zitat S. Mishra, A. K. Mohanty, L. T. Drzal, M. Misra, S. Parija, S. K. Nayak, and S. S. Tripathy, “Studies on mechanical performance of biofiber/glass reinforced polyester hybrid composites,” Compos. Sci. Technol., 63, 1377–1385 (2003).CrossRef S. Mishra, A. K. Mohanty, L. T. Drzal, M. Misra, S. Parija, S. K. Nayak, and S. S. Tripathy, “Studies on mechanical performance of biofiber/glass reinforced polyester hybrid composites,” Compos. Sci. Technol., 63, 1377–1385 (2003).CrossRef
7.
Zurück zum Zitat B. Abu-Jdayil, K. Al-Malah, and R. Sawlaha, “Study on bentonite-unsaturated polyester composite materials,” J. of Reinforced Plastics and Composites, 21, 1597–1607 (2002).CrossRef B. Abu-Jdayil, K. Al-Malah, and R. Sawlaha, “Study on bentonite-unsaturated polyester composite materials,” J. of Reinforced Plastics and Composites, 21, 1597–1607 (2002).CrossRef
8.
Zurück zum Zitat K. Al-Malah and B. Abu-Jdayil, “Clay-based heat insulator composites: Thermal and water retention properties,” Appl. Clay Sci., 37, 90–96 (2007).CrossRef K. Al-Malah and B. Abu-Jdayil, “Clay-based heat insulator composites: Thermal and water retention properties,” Appl. Clay Sci., 37, 90–96 (2007).CrossRef
9.
Zurück zum Zitat B. Abu-Jdayil and K. Al-Malah, “Jordanian clay-based heat insulator composites: Mechanical properties, J. of Reinforced Plastics and Composites, 27, 1559–1568 (2008).CrossRef B. Abu-Jdayil and K. Al-Malah, “Jordanian clay-based heat insulator composites: Mechanical properties, J. of Reinforced Plastics and Composites, 27, 1559–1568 (2008).CrossRef
10.
Zurück zum Zitat S. Sangthong, T. Pongprayoon, and N. Yanumet, “Mechanical property improvement of unsaturated polyester composite reinforced with admicellar-treated sisal fibers. Composites: Part A, 40, 687–694 (2009).CrossRef S. Sangthong, T. Pongprayoon, and N. Yanumet, “Mechanical property improvement of unsaturated polyester composite reinforced with admicellar-treated sisal fibers. Composites: Part A, 40, 687–694 (2009).CrossRef
11.
Zurück zum Zitat V. Morote-Martínez, R. Torregrosa-Coque, and J. M. Martín-Martínez, “Addition of unmodified nanoclay to improve the performance of unsaturated polyester resin coating on natural stone,” Int. J. of Adhesion and Adhesives, 31,154–163 (2011).CrossRef V. Morote-Martínez, R. Torregrosa-Coque, and J. M. Martín-Martínez, “Addition of unmodified nanoclay to improve the performance of unsaturated polyester resin coating on natural stone,” Int. J. of Adhesion and Adhesives, 31,154–163 (2011).CrossRef
12.
Zurück zum Zitat J. Lou and V. Harinath, “Effects of mineral fillers on polystyrene melt processing,” J. of Materials Processing Technology, 152, 185–189 (2004).CrossRef J. Lou and V. Harinath, “Effects of mineral fillers on polystyrene melt processing,” J. of Materials Processing Technology, 152, 185–189 (2004).CrossRef
13.
Zurück zum Zitat I. Hejazi, J.Seyfi, G. M. M. Sadeghi, and S. M. Davachi, “Assessment of rheological and mechanical properties of nanostructured materials based on thermoplastic olefin blend and organoclay,” Materials and Design, 32, 649–655 (2011).CrossRef I. Hejazi, J.Seyfi, G. M. M. Sadeghi, and S. M. Davachi, “Assessment of rheological and mechanical properties of nanostructured materials based on thermoplastic olefin blend and organoclay,” Materials and Design, 32, 649–655 (2011).CrossRef
14.
Zurück zum Zitat F. Sofrá and D. V. Boger, “Environmental rheology for waste minimization in the mineral industry,” Chemical Engineering J., 86, 319–330 (2002).CrossRef F. Sofrá and D. V. Boger, “Environmental rheology for waste minimization in the mineral industry,” Chemical Engineering J., 86, 319–330 (2002).CrossRef
15.
Zurück zum Zitat B. Abu-Jdayil, “Rheology of sodium and calcium bentonite–water dispersions: Effect of electrolytes and aging time,” Int. J. of Mineral Processing, 98, 208–213 (2011).CrossRef B. Abu-Jdayil, “Rheology of sodium and calcium bentonite–water dispersions: Effect of electrolytes and aging time,” Int. J. of Mineral Processing, 98, 208–213 (2011).CrossRef
16.
Zurück zum Zitat C. Volzone and L. B. Garrido, “The effect of some physico-chemical and mineralogical properties on the Na2CO3 activation of Argentine bentonites,” Appl. Clay Sci., 6, 143–154 (1991).CrossRef C. Volzone and L. B. Garrido, “The effect of some physico-chemical and mineralogical properties on the Na2CO3 activation of Argentine bentonites,” Appl. Clay Sci., 6, 143–154 (1991).CrossRef
17.
Zurück zum Zitat S. Tunc and O. Duman, “The effect of different molecular weight of poly(ethylene glycol) on the electrokinetic and rheological properties of Na-bentonite suspensions,” Colloids and Surfaces A: Physicochem. Eng. Aspects, 317, 93–99 (2008).CrossRef S. Tunc and O. Duman, “The effect of different molecular weight of poly(ethylene glycol) on the electrokinetic and rheological properties of Na-bentonite suspensions,” Colloids and Surfaces A: Physicochem. Eng. Aspects, 317, 93–99 (2008).CrossRef
18.
Zurück zum Zitat 18.R. N. Weltman, “Breakdown of thixotropic structure as a function of time,” J. Appl. Phys., 14, 343–350 (1943).CrossRef 18.R. N. Weltman, “Breakdown of thixotropic structure as a function of time,” J. Appl. Phys., 14, 343–350 (1943).CrossRef
Metadaten
Titel
Rheological Behavior of Bentonite-Polyester Dispersions
verfasst von
Basim Abu-Jdayil
Salah Addin Al-Omari
Publikationsdatum
01.07.2013
Verlag
Springer US
Erschienen in
Mechanics of Composite Materials / Ausgabe 3/2013
Print ISSN: 0191-5665
Elektronische ISSN: 1573-8922
DOI
https://doi.org/10.1007/s11029-013-9344-4

Weitere Artikel der Ausgabe 3/2013

Mechanics of Composite Materials 3/2013 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.