Ausgabe 1/2013
Inhalt (22 Artikel)
Editorial
The influence of measuring resolution on the subsequent roughness parameters of sanded wood surfaces
L. Gurau, H. Mansfield-Williams, M. Irle
The effect of process parameters on the hardness of surface densified Scots pine solid wood
Kristiina Laine, Lauri Rautkari, Mark Hughes
Reducing the set-recovery of surface densified solid Scots pine wood by hydrothermal post-treatment
Kristiina Laine, Lauri Rautkari, Mark Hughes, Andreja Kutnar
Properties of one-layer experimental particleboards from willow (Salix viminalis) and industrial wood particles
Krzysztof Warmbier, Arnold Wilczyński, Leszek Danecki
Relation of arabinogalactans to density, growth rate and shear strength in wood of cultivated Siberian larch
Katri Luostarinen, Henrik Heräjärvi
Analytical cracking load estimation of Laminated Veneer Lumber (LVL) beams with holes
Manoochehr Ardalany, Massimo Fragiacomo, Bruce Deam, Keith Crews
Fire performances of foam core particleboards continuously produced in a one-step process
Ali Shalbafan, Mark A. Dietenberger, Johannes Welling
Effect of thermal treatment on the physical and mechanical properties of phyllostachys pubescen bamboo
Ya Mei Zhang, Yang Lun Yu, Wen Ji Yu
Effect of copper nanoparticles on permeability, physical, and mechanical properties of particleboard
Hamid Reza Taghiyari, Omid Farajpour Bibalan
Service life of timber components: prognosis based on 3 years high-frequency monitoring
Christian Brischke, Linda Meyer, Thomas Bornemann, Maik Bilstein, Boris Lauenstein, Janna-Marcia Lück, Christian Wulf
Investigations on the physical and mechanical behaviour of sycamore maple (Acer pseudoplatanus L.)
Walter Sonderegger, Anne Martienssen, Christiane Nitsche, Tomasz Ozyhar, Michael Kaliske, Peter Niemz
Modifications in the bulk and the surface of unbleached lignocellulosic fibers induced by heat treatment without water removal: effects on tensile properties of unrefined kraft pulp
Johannes Leitner, Gerhard Zuckerstätter, Franz Schmied, Andreas Kandelbauer
Perpendicular to grain stiffness of timber cross sections as affected by growth ring pattern, size and shape
Per Johan Gustafsson, Henrik Danielsson
Heat-treatment with the vacuum-press dewatering method: chemical properties of the manufactured wood and the condensation water
Tamás Hofmann, Melanie Wetzig, Tamás Rétfalvi, Tom Sieverts, Holger Bergemann, Peter Niemz
Enhancing MUF particleboard adhesives performance by glutaraldehyde addition
X. Zhou, A. Pizzi, G. Du
Tannin-furfuryl alcohol wood panel adhesives without formaldehyde
Ummi Hani Binti Abdullah, A. Pizzi
Wood–water relations of chestnut wood used for structural purposes
Andrés Dieste, Katia Rodríguez, Vanessa Baño
Finishing characteristics of heat treated and compressed Rubberwood
J. Ratnasingam, Florin Ioras
Wood based bulk material in 3D printing processes for applications in construction
Klaudius Henke, Sebastian Treml
Mould resistance of Moso bamboo treated by two step heat treatment with different aqueous solutions
Dali Cheng, Shenxue Jiang, Qisheng Zhang