Ausgabe 6/2017
Inhalt (51 Artikel)
Analysis of cost-increasing risk factors in modular construction in Korea using FMEA
Jae-Seung Lee, Yea-Sang Kim
Formulating the application functional requirements of a BIM-based collaboration platform to support IPD projects
Zhiliang Ma, Jiankun Ma
A study on scan data matching for reverse engineering of pipes in plant construction
Mina Lee, Seongki Lee, Soonwook Kwon, Sangyoon Chin
Non-working day estimation in high-rise building construction with wind load data by radiosonde and weibull distribution
Se Hoon Kim, Yea-Sang Kim
Duration prediction models for construction projects: In terms of cost or physical characteristics?
Savas Bayram
Applying physiological status monitoring in improving construction safety management
Ming-Kuan Tsai
Ammonia and carbon dioxide emissions from a laying hen house under summer conditions in Bursa region of Turkey
Ilker Kilic
An application of OLAP/GIS-Fuzzy AHP-TOPSIS methodology for decision making: Location selection for landfill of industrial wastes as a case study
Mohamed Hanine, Omar Boutkhoum, Abdessadek Tikniouine, Tarik Agouti
Multi-objective optimization response modeling to contaminated water distribution networks: Pressure driven versus demand driven analysis
Seyyed Nasser Bashi-Azghadi, Mohammad Hadi Afshar, Abbas Afshar
Differential mode of denitrification by Pseudomonas sp. KY1 using molasses as a carbon source
Kyuyeon Lee, Yongju Choi, Byung Sun Lee, Kyoungphile Nam
Enhancement of volatile fatty acids removal by a co-culture of microalgae and activated sludge
Thi Hiep Han, Shan Zhang, Moo Hwan Cho, Sun-Jin Hwang
Aerobic denitrification by a heterotrophic nitrifying-aerobic denitrifying (HN-AD) culture enriched activated sludge
Kyoung-Jin Choi, Shan Zhang, Ji Hyeon Song, Sun-Jin Hwang
Nitrate reduction by micro-scale zero-valent iron particles under oxic condition
Sangmin Lee, Youngsik Yun, Do-Gun Kim
Effect of freeze-thaw cycles on triaxial strength properties of fiber-reinforced clayey soil
Muge Elif Orakoglu, Jiankun Liu
Effect of structural features in a distorting structure due to excavation-induced ground movements
Moorak Son
Compressibility and small strain stiffness of kaolin clay mixed with varying amounts of sand
Hyunwook Choo, Woojin Lee, Changho Lee
Parametric study of horizontal drains for slope stability measure: A case study in Putrajaya, Malaysia
Mohd Ashraf Mohamad Ismail, Soon Min Ng, Ismail Abustan
Evolution of stiffness anisotropy during creep of engineered silty sand in South Korea
Ka-Hyun Park, Young-Hoon Jung, Choong-Ki Chung
Smoothness improvement by HMA overlay on very rough surface in urban tunnel expressway
Abraham Bae, David Lee, Jun Yew Tan
A proposed procedure for progressive collapse analysis of common steel building structures to blast loading
Meysam Bagheri Pourasil, Yaghoub Mohammadi, Amin Gholizad
Effect and mechanism of sulfates on dispersity of polycarboxylate-type superplasticizers
Yan He, Xiong Zhang, Jian Guan
Effect of sodium hydroxide and sodium silicate solutions on strengths of alkali activated high calcium fly ash containing Portland cement
Tanakorn Phoo-ngernkham, Sakonwan Hanjitsuwan, Nattapong Damrongwiriyanupap, Prinya Chindaprasirt
Review of analytical and empirical estimations for incident blast pressure
Aleem Ullah, Furqan Ahmad, Heung-Woon Jang, Sung-Wook Kim, Jung-Wuk Hong
A mathematical programming model for solving cost-safety optimization (CSO) problems in the maintenance of structures
Sayed Madeh Piryonesi, Mehdi Tavakolan
Seismic vulnerability assessment of strengthened Glass Fiber Reinforced Concrete (GFRC)
Liaqat Ali Qureshi, Junaid Ahmad, Hammad Salahuddin
Exploratory study on improving bond strength of shotcrete in hot and dry environments of high geothermal tunnels
Shengai Cui, Deli Xu, Pin Liu, Yuezhong Ye
Using granite siftings for producing vibro-pressed fine-grained concrete
L. Dvorkin, O. Dvorkin, Y. Ribakov, V. Zhitkovsky
On the tensile capacity of single-bolted connections between GFRP angles and gusset plates-testing and modelling
M. D. Raghunathan, R. Senthil, G. S. Palani
Ultimate internal pressure of Prestressed Concrete Containment Vessel analyzed by an integral constitutive model
Chaobi Zhang, Jianyun Chen, Jing Li
Stacking sequence optimization for maximum fundamental frequency of simply supported antisymmetric laminated composite plates using Teaching–learning-based Optimization
Umut Topal, Tayfun Dede, Hasan Tahsin Öztürk
Experimental study on shear behavior of BFRP-reinforced recycled aggregate concrete deep beams without stirrups
Hua-Xin Liu, Jian-Wei Yang, Xue-Zhi Wang, Ding-Jie Han
Flexural behavior of RC beams externally strengthened with CFRP composites exposed to severe environment conditions
Rajai Z. Al-Rousan, Mohsen A. Issa
An ABC-BP-ANN algorithm for semi-active control for Magnetorheological damper
Qiang Xu, Jianyun Chen, Xiaopeng Liu, Jing Li, Chenyang Yuan
Evaluation of energy-producing capability from pedestrian-induced vibration in footbridge by a new Tuned Mass Piezo-Damper
Jinkyo F. Choo, Dong-Ho Ha, Hye-Kyung Han
Experimental study on Y-shaped bridge under 3-dimentional earthquake ground motions
Yan Lei, Qingning Li
Numerical simulation of fatigue behavior for cable-stayed orthotropic steel deck bridges using mixed-dimensional coupling method
Fei Yan, Zhibin Lin, Ying Huang
Mechanical behavior and damage evolution for concrete subjected to multiple impact loading
Xudong Chen, Lingyu Xu, Qiao Zhu
A new approach to system reliability analysis of offshore structures using dominant failure modes identified by selective searching technique
Marco N. Coccon, Junho Song, Seung-Yong Ok, Ugo Galvanetto
A heuristic-based population synthesis method for micro-simulation in transportation
Chengxiang Zhuge, Xia Li, Chia-An Ku, Jian Gao, Hui Zhang
Estimating modal shift by introducing transit priority strategies under congested traffic using the multinomial logit model
Ling Ding, Ning Zhang
Passengers’ behavioral intentions towards congestion: Observational study of the entry restrictions at traffic bottleneck
Yifan Zhuang, Xiao dong Zhou, Yong Ni, Lizhong Yang
Impact of unused life for track sections and available workforce in scheduling tamping actions on ballasted tracks
Mohammad Daddow, Xiedong Zhang, Hongsheng Qiu, Zhihua Zhang
Longitudinal assessment of high-speed rail service delivery, satisfaction and operations: A study of Taiwan and Korea systems
Jui-Sheng Chou, Changwan Kim, Pei-Yu Tsai, Chun-Pin Yeh, Hyojoo Son
Groundwater inflow assessment to Karaj Water Conveyance tunnel, northern Iran
Hadi Farhadian, Arash Nikvar Hassani, Homayoon Katibeh
Deformation rule and mechanical characteristics of temporary support in soil tunnel constructed by sequential excavation method
Yanbin Luo, Jianxun Chen, Hongyu Wang, Penglei Sun
The hydraulic stability assessment of jointed rock mass by analysis of stress path due to underground excavation
Min Son, Hyun-Koo Moon
Study on deformation behavior at intersection of adit and major tunnel in railway
Hong-liang Liu, Shu-cai Li, Li-ping Li, Qian-qing Zhang
Novel method for calculating the effective stress coefficient in a tight sandstone reservoir
Yinghao Shen, Guohua Luan, Haiyong Zhang, Qian Liu, Junjing Zhang, Hongkui Ge
Finite element model methodology for asphalt-coated anchor used in underground main powerhouse anchored-on-rock crane girder
Dongdong Li, Ming Xiao, Juntao Chen, Jian Zhao
Determining optimal locations for rainwater storage sites with the goal of reducing urban inundation damage costs
Hyeonseok Choi, Eui Hoon Lee, Jin Gul Joo, Joong Hoon Kim
RETRACTED ARTICLE: Identification of plastic hinge length for pre-tensioning confined HSC columns
Chau-Khun Ma, Abdullah Zawawi Awang, Wahid Omar