Ausgabe 1/2013
Inhalt (59 Artikel)
Effect of Intermittent Overload Cycles on Thermomechanical Fatigue Life of NiTi Shape Memory Alloy Wire
C. N. Saikrishna, K. V. Ramaiah, B. Vidyashankar, S. K. Bhaumik
Microstructural Evolution of Brazed CP-Ti Using the Clad Ti-20Zr-20Cu-20Ni Foil
Tze-Yang Yeh, Ren-Kae Shiue, Chenchung Steve Chang
Foreword
R. I. Barabash, Xun-Li Wang, G. Korstorz, Brent Fultz, Lyle Levine, P. K. Liaw
Assessment of Plastic Deformation Induced by Indentation on a Large Grain on Inconel 600 Using Synchrotron Polychromatic X-ray Microdiffraction
Marina Suominen Fuller, Rozaliya Barabash, Stewart McIntyre, Sridhar Ramamurthy, Wenjun Liu
Application of In Situ Neutron and X-Ray Measurements at High Temperatures in the Development of Co-Re-Based Alloys for Gas Turbines
Debashis Mukherji, Joachim Rösler, Juri Wehrs, Pavel Strunz, Přemysl Beran, Ralph Gilles, Michael Hofmann, Markus Hoelzel, Helmut Eckerlebe, Laszlo Szentmiklósi, Zsuzsanna Mácsik
A Methodology for Determination of γ′ Site Occupancies in Nickel Superalloys Using Atom Probe Tomography and X-ray Diffraction
Jaimie S. Tiley, O. Senkov, G. Viswanathan, S. Nag, J. Hwang, R. Banerjee
Interference Effects in Nanocrystalline Systems
A. Leonardi, M. Leoni, P. Scardi
On X-Ray Diffraction Study of Microstructure of ZnO Thin Nanocrystalline Films with Strong Preferred Grain Orientation
R. Kužel, J. Čížek, M. Novotný
Hydrogen Storage Properties of Graphite-Modified Mg-Ni-Ce Composites Prepared by Mechanical Milling Followed by Microwave Sintering
Jie Meng, Xun-Li Wang, Kuo-Chih Chou, Qian Li
Ultra-Small-Angle X-ray Scattering Instrument at the Advanced Photon Source: History, Recent Development, and Current Status
J. Ilavsky, F. Zhang, A. J. Allen, L. E. Levine, P. R. Jemian, G. G. Long
Quantitative Characterization of Precipitate Microstructures in Metallic Alloys Using Small-Angle Scattering
Alexis Deschamps, Frédéric de Geuser
Assessing Local Structure in PbZn1/3Nb2/3O3 Using Diffuse Scattering and Reverse Monte Carlo Refinement
M. Paściak, A. P. Heerdegen, D. J. Goossens, R. E. Whitfield, A. Pietraszko, T. R. Welberry
A Review on Small- and Wide-Angle X-Ray Scattering Applied to the Precipitation Process in Metallic Alloys
Hiroshi Okuda, Shojiro Ochiai
Lattice Defects Diffuse Scattering from Thin Films of a Ge-Si System with Low-Energy Ar+ and Xe+ Bombardment During Molecular Beam Epitaxy (MBE) Growth
Paul Rozenak
The Distribution of Grain Boundary Planes in Interstitial Free Steel
Hossein Beladi, Gregory S. Rohrer
Retardation of the Cu5Zn8 Phase Fracture and Improvement of Shear Strength of the Sn-9 wt pct Zn/Cu Interface by Inserting an Electroless Palladium Layer
Po-Hsun Lee, Chi-Pu Lin, Chih-Ming Chen
Strain Effect on the γ′ Dissolution at High Temperatures of a Nickel-Based Single Crystal Superalloy
Rémi Giraud, Zéline Hervier, Jonathan Cormier, Gilles Saint-Martin, Florence Hamon, Xavier Milhet, José Mendez
Texture Evolution of Abnormal Grains with Post-Deposition Annealing Temperature in Nanocrystalline Cu Thin Films
Sung Bo Lee, Dong-Ik Kim, Seong-Hyeon Hong, Dong Nyung Lee
Comparative Study on Austenite Decomposition and Cu Precipitation During Continuous Cooling Transformation
Qing-Dong Liu, Shi-Jin Zhao
Effect of Co Addition on the Microstructure, Martensitic Transformation and Shape Memory Behavior of Fe-Mn-Si Alloys
Bikas C. Maji, Madangopal Krishnan, M. Sujata, Gouthama, Ranjit K. Ray
Effect of Pre-Treatment on Copper Precipitation Characteristics in a Copper-Alloyed Interstitial Free Steel Studied by Thermoelectric Power Measurement
Radhakanta Rana, Véronique Massardier, Shiv Brat Singh, Omkar Nath Mohanty
Effects of Thermomechanical Processing and Heat Treatment on the Tensile and Creep Properties of Boron-Modified Near Alpha Titanium Alloy Ti-1100
Vivek Chandravanshi, R. Sarkar, S. V. Kamat, T. K. Nandy
Analysis of Tensile Stress-Strain and Work-Hardening Behavior in 9Cr-1Mo Ferritic Steel
B. K. Choudhary, D. P. Rao Palaparti, E. Isaac Samuel
Effect of Tempering Time on Microstructure, Tensile Properties, and Deformation Behavior of a Ferritic Light-Weight Steel
Seung Youb Han, Sang Yong Shin, Byeong-Joo Lee, Sunghak Lee, Nack J. Kim, Jai-Hyun Kwak
The Relationship Between Crack-Tip Strain and Subcritical Cracking Thresholds for Steels in High-Pressure Hydrogen Gas
Kevin A. Nibur, Brian P. Somerday, Chris San Marchi, James W. Foulk III, Mohsen Dadfarnia, Petros Sofronis
Effects of Deformation Behavior and Processing Temperature on the Fatigue Performance of Deep-Rolled Medium Carbon Bar Steels
M. D. Richards, M. E. Burnett, J. G. Speer, D. K. Matlock
Medium-Alloy Manganese-Rich Transformation-Induced Plasticity Steels
Dong Woo Suh, Joo Hyun Ryu, Min Sung Joo, Hong Seok Yang, Kyooyoung Lee, H. K. D. H. Bhadeshia
Effects of Cooling Conditions on Microstructure, Tensile Properties, and Charpy Impact Toughness of Low-Carbon High-Strength Bainitic Steels
Hyo Kyung Sung, Sang Yong Shin, Byoungchul Hwang, Chang Gil Lee, Sunghak Lee
A New Nonmetallic Inclusion Rating Method by Positive Use of Hydrogen Embrittlement Phenomenon
Shinji Fujita, Yukitaka Murakami
Friction Stir Welded AZ31 Magnesium Alloy: Microstructure, Texture, and Tensile Properties
S. H. Chowdhury, D. L. Chen, S. D. Bhole, X. Cao, P. Wanjara
Material Flow in Friction Stir Welds
Richard Fonda, Anthony Reynolds, C. R. Feng, Keith Knipling, David Rowenhorst
Microstructural Evolution During Friction Surfacing of Austenitic Stainless Steel AISI 304 on Low Carbon Steel
H. Khalid Rafi, N. Kishore Babu, G. Phanikumar, K. Prasad Rao
An Improved Theoretical Model for A-TIG Welding Based on Surface Phase Transition and Reversed Marangoni Flow
T. Sándor, C. Mekler, J. Dobránszky, G. Kaptay
Influence of Gas Atmosphere Dew Point on the Selective Oxidation and the Reactive Wetting During Hot Dip Galvanizing of CMnSi TRIP Steel
Lawrence Cho, Seok Jae Lee, Myung Soo Kim, Young Ha Kim, Bruno C. De Cooman
Microstructural Characterization and Properties Evaluation of Ni-Based Hardfaced Coating on AISI 304 Stainless Steel by High Velocity Oxyfuel Coating Technique
Prashant Sharma, Jyotsna Dutta Majumdar
Behavior of Boron in Molten Aluminum and its Grain Refinement Mechanism
Houshang D. Alamdari, Dominique Dubé, Pascal Tessier
Liquidus Projection of the B-Fe-U Diagram: The Boron-Rich Corner
Marta Dias, Patrícia Almeida Carvalho, Marcel Bohn, Olivier Tougait, Henri Noël, António Pereira Gonçalves
The Morphological Evolution of Low Volume Fraction Tin Dendrites During Coarsening
Amber L. Genau, Peter W. Voorhees
Reduced-Pressure Foaming of Aluminum Alloys
G. S. Vinod Kumar, M. Mukherjee, F. Garcia-Moreno, J. Banhart
Electron Microscopic Study on the Suction Cast In Situ Ti-Fe-Sn Ultrafine Composites
Sumanta Samal, Barnali Mondal, Krishanu Biswas, Govind
Strengthening and Toughening of a Heavy Plate Steel for Shipbuilding with Yield Strength of Approximately 690 MPa
Dongsheng Liu, Binggui Cheng, Yuanyuan Chen
Particle Stimulated Nucleation in Coarse-Grained Ferritic Stainless Steel
Rodrigo Pinto de Siqueira, Hugo Ricardo Zschommler Sandim, Dierk Raabe
Deformation Characteristics and Recrystallization Response of a 9310 Steel Alloy
David Snyder, Edward Y. Chen, Charlie C. Chen, Sammy Tin
Phase and Formation/Dissolution of Precipitates in Biomedical Co-Cr-Mo Alloys with Nitrogen Addition
Shingo Mineta, Alfirano, Shigenobu Namba, Takashi Yoneda, Kyosuke Ueda, Takayuki Narushima
Room Temperature Shear Band Development in Highly Twinned Wrought Magnesium AZ31B Sheet
Jon Scott, Michael Miles, David Fullwood, Brent Adams, Ali Khosravani, Raja K. Mishra
Effects of Rotation Rates on Microstructure, Mechanical Properties, and Fracture Behavior of Friction Stir-Welded (FSW) AZ31 Magnesium Alloy
J. Yang, D. Wang, B. L. Xiao, D. R. Ni, Z. Y. Ma
Fracture Properties of SPS Tungsten Copper Powder Composites
Medhat Awad El-Hadek, Saleh Hamada Kaytbay
Effect of Co on Creep Behavior of a P911 Steel
Alla Kipelova, Marina Odnobokova, Andrey Belyakov, Rustam Kaibyshev
Role of Si on the Diffusional Interactions Between U-Mo and Al-Si Alloys at 823 K (550 °C)
Emmanuel Perez, Yong-Ho Sohn, Dennis D. Keiser Jr.