Ausgabe 3/2004
Inhalt (43 Artikel)
Interfacial segregation and influence of antiphase boundaries on rafting in a γ/γ′ alloy
C. Y. Chen, W. M. Stobbs
A single-grain approach applied to the modeling of recrystallization kinetics for cold-rolled single-phase metals
S. P. Chen, S. Van Der Zwaag
Evolution of secondary phases in Cr-V low-alloy steels during aging
J. Janovec, A. Vyrostková, M. Svoboda, A. Kroupa, H. J. Grabke
Shape memory properties of Ni-Ti based melt-spun ribbons
R. Santamarta, E. Cesari, J. Pons, T. Goryczka
Effect of broaching on high-temperature fatigue behavior in notched specimens of INCONEL 718
T. Connolley, M. J. Starink, P. A. S. Reed
Low-cycle fatigue behavior of ULTIMET® alloy
L. Jiang, C. R. Brooks, P. K. Liaw, J. Dunlap, C. J. Rawn, R. A. Peascoe, D. L. Klarstrom
Deformation and damage mechanisms of zinc coatings on hot-dip galvanized steel sheets: Part I. Deformation modes
Rodolphe Parisot, Samuel Forest, André Pineau, François Grillon, Xavier Demonet, Jean-Michel Mataigne
Deformation and damage mechanisms of zinc coatings on hot-dip galvanized steel sheets: Part II. Damage modes
Rodolphe Parisot, Samuel Forest, André Pineau, François Grillon, Xavier Demonet, Jean-Michel Mataigne
High-strain-rate superplastic behavior of equal-channel angular-pressed 5083 Al-0.2 wt pct Sc
Dong Hyuk Shin, Duck-Young Hwang, Yong-Jun Oh, Kyung-Tae Park
Temperature evolution and life prediction in fatigue of superalloys
L. Jiang, H. Wang, P. K. Liaw, C. R. Brooks, L. Chen, D. L. Klarstrom
Hydrogen trap states in ultrahigh-strength AERMET 100 steel
Daoming Li, Richard P. Gangloff, John R. Scully
Effect of surface modification of high-density polyethylene by direct current and radio frequency glow discharge on wetting and adhesion characteristics
S. Bhowmik, T. K. Chaki, S. Ray, F. Hoffman, L. Dorn
Assessment of the origin of porosity in electron-beam-welded TA6V plates
N. Gouret, E. Ollivier, G. Dour, R. Fortunier, B. Miguet
Semi-solid rapid compression testing of spray-formed hypereutectic Al-Si alloys
S. C. Hogg, H. V. Atkinson, P. Kapranos
The effect of temperature, matrix alloying and substrate coatings on wettability and shear strength of Al/Al2O3 couples
N. Sobczak, M. Ksiazek, W. Radziwill, R. Asthana, B. Mikulowski
Textural changes during β→α and α→β→α transformations in a near-α titanium alloy
Satyam Suwas, A. K. Singh
Effect of grain-boundary characteristics on castability of nickel-base superalloys
Jian Zhang, Robert F. Singer
Mechanical behavior of a cryomilled nanostructured Al-7.5 pct Mg alloy
B. Q. Han, Z. Zhang, E. J. Lavernia, D. Matejczyk, C. Bampton, F. Zhou, F. A. Mohamed
Effect of thermomechanical processing on grain structure development in a twin-belt strip cast automotive aluminum alloy
S. X. Girard, H. N. Azari, D. S. Wilkinson
Resonant vibration behavior of an Al-3.8Cu-0.8Li-0.3Mg alloy
J. M. Song, B. H. Tan, T. S. Lui, L. H. Chen
“Authors’ reply” to discussion of “Eutectic solidification of Al-Si alloys”
A. K. Dahle, S. D. McDonald, K. Nogita
Measurement and modeling of the electromagnetic response to phase transformation in steels
M. P. Papaelias, M. Strangwood, C. L. Davis, A. J. Peyton
Effect of aging and deformation on the microstructure and properties of Fe-Ni-Ti maraging steel
A. Shekhter, H. I. Aaronson, M. R. Miller, S. P. Ringer, E. V. Pereloma
Effect of simulated thermal cycles on the microstructure of the heat-affected zone in HSLA-80 and HSLA-100 steel plates
M. Shome, O. P. Gupta, O. N. Mohanty
Fracture behavior of thixoformed 357-T5 Al alloys
Chul Park, Sangshik Kim, Yongnam Kwon, Youngseon Lee, Junghwan Lee
Correlation of microstructure with hardness and wear resistance in (TiC,SiC)/stainless steel surface composites fabricated by high-energy electron-beam irradiation
Eunsub Yun, Yong Chan Kim, Sunghak Lee, Nack J. Kim
Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel
A. Lambert-Perlade, T. Sturel, A. F. Gourgues, J. Besson, A. Pineau
Effects of an α-Al2O3 thin film on the oxidation behavior of a single-crystal Ni-based superalloy
Y. -F. Su, W. Y. Lee, L. F. Allard, D. W. Coffey
Morphologies of silicon crystals solidified on a chill plate
R. P. Liu, D. M. Herlach, M. Vandyoussefi, A. L. Greer
Determination of volume fractions of texture components with standard distributions in euler space
Jae-Hyung Cho, A. D. Rollett, K. H. Oh
The cut-groove technique to infer interfacial effects during hot rolling
S. Das, E. J. Palmiere, Immpetus I. C. Howard
Effects of preoxidation on the nucleation and growth behavior of chemically vapor-deposited α-Al2O3 on a single-crystal Ni-based superalloy
L. M. He, Y. -F. Su, W. Y. Lee, L. F. Allard, M. J. Lance
Hot explosive compaction of aluminum-nickelide composites
Laszlo J. Kecskes, Steven T. Szewczyk, Akaki B. Peikrishvili, Nikoloz M. Chikhradze
A hybrid micromechanical-macroscopic model for the analysis of the tensile behavior of cavitating materials
P. D. Nicolaou, S. L. Semiatin
Some studies on the thermal-expansion behavior of c-fiber, SiC p , and in-situ Mg2Si-Reinforced AZ31 Mg alloy-Based hybrid composites
S. K. Thakur, B. K. Dhindaw, N. Hort, K. U. Kainer