Ausgabe 3/2005
Inhalt (40 Artikel)
Processing, microstructure, and mechanical properties of (Nb)/Nb5Si3 two-phase alloys
Yoshisato Kimura, Yoshinao Mishima, Hiroaki Yamaoka, Nobuaki Sekido
Effects of Zr on the eutectoid decomposition behavior of Nb3Si into (Nb)/Nb5Si3
Seiji Miura, Miki Aoki, Yasuhiko Saeki, Kenji Ohkubo, Tetsuo Mohri, Yoshinao Mishima
Microstructural properties of Nb-Si alloys investigated using EBSD at large and small scale
Stefan Drawin, Denis Boivin, Pierre Petit
Assessment of a powder metallurgical processing route for refractory metal silicide alloys
P. Jéhanno, H. Kestler, A. Venskutonis, M. Böning, M. Heilmaier, B. Bewlay, M. Jackson
Optimization of Mo-Si-B intermetallic alloys
J. H. Schneibel, P. F. Tortorelli, R. O. Ritchie, J. J. Kruzic
The effect of Nb and W alloying additions to the thermal expansion anisotropy and elastic properties of Mo5Si3
Taisuke Hayashi, Misako Takamoto, Kazuhiro Ito, Katsushi Tanaka
Partial phase relationships in Ir-Nb-Ni-Al and Ir-Nb-Pt-Al quaternary systems and mechanical properties of their alloys
C. Huang, Y. Yamabe-Mitarai, S. Nakazawa, H. Harada, X. H. Yu
Compressive creep properties of Ir-base refractory superalloys
Y. Yamabe-Mitarai, Y. Gu, H. Harada, C. Huang
Dislocation structure, phase stability, and yield stress behavior of L12 intermetallics: Ir3X (X = Ti, Zr, Hf, V, Nb, Ta)
O. Y. Kontsevoi, A. J. Freeman, Y. N. Gornostyrev, A. F. Maksyutov, K. Y. Khromov
On the development and investigation of quaternary Pt-based superalloys with Ni additions
M. Wenderoth, U. Glatzel, R. Völkl, L. A. Cornish, R. Süss, S. Vorberg, B. Fischer
Microstructural evolution and mechanical properties of Cr-Ru alloys
Y. F. Gu, Y. Ro, T. Kobayashi, H. Harada
Phase field and room-temperature mechanical properties of the C15 laves phase in the Zr-Ta-Cr alloy system
T. Ohta, Y. Kaneno, H. Inoue, T. Takasugi, S. Hanada
Atomic diffusion and phase equilibria at the interfaces of the CoAl/Ir multilayer on Nb5Si3-base alloys
Yoshisato Kimura, Tatsuya Shimizu, Yoshinao Mishima, Sachiyori Shina
Oxidation behavior of multiphase Nb-Mo-Si-B intermetallics
Y. Liu, M. J. Kramer, A. J. Thom, M. Akinc
Chlorination treatment to improve the oxidation resistance of Nb-Mo-Si-B alloys
Vikas Behrani, Andrew J. Thom, Matthew J. Kramer, Mufit Akinc
Development of Mo(Si,Al)2-base oxidation-resistant coating on Nb-base structural materials
Tatsuo Tabaru, Jin-Hak Kim, Kazuhisa Shobu, Michiru Sakamoto, Hisatoshi Hirai, Shuji Hanada
Oxidation protective silicide coating on Mo-Si-B alloys
Kazuhiro Ito, Hiroshi Numakura, Taisuke Hayashi, Masato Yokobayashi, Takashi Murakami
The effects of stress level and grain size on the ambient temperature creep deformation behavior of an alpha Ti-1.6 wt pct V alloy
A. K. Aiyangar, B. W. Neuberger, P. G. Oberson, S. Ankem
Influence of solidification conditions on the castability of nickel-base superalloy IN792
Yizhou Zhou, Andreas Volek, Robert F. Singer
Cold spray deposition of nanocrystalline aluminum alloys
Leonardo Ajdelsztajn, Julie M. Schoenung, Bertrand Jodoin, George E. Kim
Damping behavior of Al-Li-SiCp composites processed by stir casting technique
Ranjit Bauri, M. K. Surappa
Optimization of composition and heat treatment of age-hardened Pt-Al-Cr-Ni alloys
M. Hüller, M. Wenderoth, U. Glatzel, R. Völkl, S. Vorberg, B. Fischer
The influence of alloy composition on precipitates of the Al-Mg-Si system
C. D. Marioara, S. J. Andersen, H. W. Zandbergen, R. Holmestad
Microstructure, properties, and age hardening behavior of a thermomechanically processed ultralow-carbon cu-bearing high-strength steel
A. Ghosh, S. Chatterjee, B. Mishra, S. Das
Mechanical properties and fracture behavior of an ultrafine-grained Al-20 wt pct Si alloy
Soon-Jik Hong, C. Suryanarayana
Correlation of microstructure and fracture properties of API X70 pipeline steels
Byoungchul Hwang, Young Min Kim, Sunghak Lee, Nack J. Kim, Seong Soo Ahn
Effects of volume fraction of tempered martensite on dynamic deformation properties of a Ti-6Al-4V alloy having a bimodal microstructure
Dong-Geun Lee, You Hwan Lee, Chong Soo Lee, Sunghak Lee
Precipitate effects on the mechanical behavior of aluminum copper alloys: Part I. Experiments
H. Sehitoglu, T. Foglesong, H. J. Maier
Precipitate effects on the mechanical behavior of aluminum copper alloys: Part II. Modeling
H. Sehitoglu, T. Foglesong, H. J. Maier
Effect of orientation on the tensile and creep properties of coarse-grained INCONEL alloy MA754
Terry C. Totemeier, Thomas M. Lillo
Phase evolution during laser in-situ carbide coating
Anshui Singh, Narendra B. Dahotre, Narendra B. Dahotre
Migration of crystals during the filling of semi-solid castings
H. I. Laukli, C. M. Gourlay, A. K. Dahle
Microstructure and refining performance of an Al-5Ti-0.25C refiner before and after equal-channel angular pressing
Zuogui Zhang, Yoshimi Watanabe, Icksoo Kim, Xiangfa Liu, Xiufang Bian
Thermomechanical response of a powder metallurgy Ti-6Al-4V alloy modified with 2.9 pct boron
Radhakrishna B. Bhat, Seshacharyulu Tamirisakandala, Daniel B. Miracle, Vilupanur A. Ravi
Microstructural evolution during hot working of Ti aluminide alloys: Influence of phase constitution and initial casting texture
R. M. Imayev, V. M. Imayev, M. Oehring, F. Appel
Through-thickness texture gradient in an annealed Al-Mg alloy sheet
Jiantao Liu, S. W. Banovic, F. S. Biancaniello, R. D. Jiggetts