Ausgabe 9/2005
Inhalt (33 Artikel)
Microstructure and mechanical properties of a 2000 MPa grade co-free maraging steel
Yi He, Ke Yang, Wei Sha
The formation of AIN crystals in an Fe-Mn-Al-C alloy during the nitriding process
Jyh-Hong Jaw, Wei-Chun Cheng, Chaur-Jeng Wang
Effect of prior-austenite grain size and transformation temperature on nodule size of microalloyed hypereutectoid steels
A. M. Elwazri, S. Yue, P. Wanjara
Molecular-dynamic simulations of martensitic transformation of cobalt
Min Jiang, Katsunari Oikawa, Tamio Ikeshoji
Three-dimensional finite-element analysis of the quenching process of plain-carbon steel with phase transformation
Seong-Hoon Kang, Yong-Taek Im
Analysis of the γ → α transformation in a C-Mn steel by phase-field modeling
M. G. Mecozzi, J. Sietsma, S. van der Zwaag, M. Apel, P. Schaffnit, I. Steinbach
Precipitation of Sr-rich intermetallic particles and their influence on pore formation in Sr-modified A356 alloy
S. M. Miresmaeili, J. Campbell, S. G. Shabestari, S. M. A. Boutorabi
Microstructural studies on lattice imperfections in irradiated titanium and Ti-5 Pct Ta-2 Pct Nb by X-ray diffraction line-profile analysis
P. Mukherjee, F. A. Sarkar, P. Barat, Baldev Raj, U. Kamachi Mudali
Interdiffusion structures and paths for multiphase Fe-Ni-Al diffusion couples at 1000 °C
Y. H. Sohn, A. Puccio, M. A. Dayananda
Stored energy, microstructure, and flow stress of deformed metals
A. Godfrey, W. Q. Cao, Q. Liu, N. Hansen
Effect of strain and strain rate on the bauschinger effect response of three different steels
K. Han, C. J. Van Tyne, B. S. Levy
High-temperature creep-deformation behavior of the Ni-based superalloy M963
L. Z. He, Q. Zheng, X. F. Sun, H. R. Guan, Z. Q. Hu, A. K. Tieu, C. Lu, H. T. Zhu
Ambient- to elevated-temperature fracture and fatigue properties of Mo-Si-B alloys: Role of microstructure
J. J. Kruzic, J. H. Schneibel, R. O. Ritchie
The influence of thermomechanical treatment on the complex modulus of Mg alloy AZ31
A. Munitz, R. E. Ricker, D. J. Pitchure, G. Kimmel
Surface hardening of Ti alloys by gas-phase nitridation: Kinetic control of the nitrogen surface activity
L. Liu, F. Ernst, G. M. Michal, A. H. Heuer
An extended Derjaguin-Landau-Verwey-Overbeek theory approach to determining the surface energy of copper oxide thin films prepared by reactive magnetron sputtering
A. A. Ogwu, F. Placido, O. Ademosu, S. Moh, E. Crossan, E. Bouquerel
A novel process for fabricating electrical contact SnO2/Ag composites by reciprocating extrusion
Yu-Liang Chen, Shih-Wei Lee, Jien-Wei Yeh, Chih-Fu Yang, Shui-Shu Hung
Microstructure development in finely atomized droplets of copper-iron alloys
Jie He, Jiu-Zhou Zhao, Xiao-Feng Wang, Ling-Ling Gao
Evaluation of melt quality and graphite degeneration prediction in heavy section ductile iron
Zhenhua Li, Yanxiang Li
Infiltration and directional solidification of CMSX-4 through a particulate ceramic preform
Rui Shao, Matthew J. M. Krane, Kevin P. Trumble
Influence of spraying conditions on microstructures of Al-SiC p composites by plasma spraying
Manchang Gui, Suk Bong Kang, Kwangjun Euh
Integrated modeling for the manufacture of Ni-based superalloy discs from solidification to final heat treatment
S. Tin, P. D. Lee, A. Kermanpur, M. McLean, M. Rist
Reaction products of Al/TiC composites fabricated by the pressureless infiltration technique
K. B. Lee, H. S. Sim, H. Kwon
Discussion of “Interfacial layer in coatings produced in molten Zn-Al eutectoid alloy containing Si”
N. -Y. Tang, Y. H. Liu
Roughening of the interface between grains and liquid matrix in sintered TaC-20Ni
Young Kyu Cho, Duk Yong Yoon, Jung Hoon Choi, Jong Ku Park
Elevated temperature strength of fine-grained INCONEL alloy MA754
T. C. Totemeier, T. M. Lillo, J. A. Simpson
Surface segregation and directionality of {110} grains in electrical steels containing Sn and Sb
N. H. Heo
Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu Alloy
D. G. Eskin, V. I. Savran, L. Katgerman