Metallurgist

Evaluating the potential danger to subdivisions of the casting-rolling complex at OMK-steel in Vyksa

Effect of the process parameters on the unit consumption of resources in sinter production

A. A. Panychev, A. P. Nikonova

Bell-less rotary charging unit – A perfect burden loading technology

B. Boranbaev, Y. Glazer, V. Vakulin, A. Sirkar

Pumping slag from a hot-metal-car ladle before the pig iron is poured into a converter

V. N. Artyushov, D. V. Akhmetov, O. K. Tokovoi, V. S. Baldin, K. V. Vol’skii

Economic aspects of the vacuum treatment of steel by VDF/VODF technology

N. A. Shchegolev, A. V. Luk’yanov

Technology for preparing metal objects in a horizontal casting and metal deformation unit

V. I. Odinokov, V. V. Chernomas, N. S. Lovizin, V. V. Stulov, S. Yu. Sklyar

Ingot solidification in a continuous billet casting machine with dynamic pouring regimes

A. V. Gofman, V. G. Popov, S. V. Lukin

Corrosion resistance and tendency towards corrosion-mechanical failure of new pipe steels in hydrogen sulfide-containing media in Northern Russia oil fields

E. S. Ivanov, M. L. Brodskii, A. V. Timonin

Sizing skelp in a continuous pipe-welding mill

E. A Maksimov

Determination of the energy parameters for the smelting of ferrosilicon with an increased electrode gap. Limitation on the electrode–electrode current

A. P. Shkirmontov

Production and use of ferrosilicon in a protective aluminum-bearing film

G. A. Isaev

Production of a high-density powder by electrocontact compaction

T. A. Litvinova

International conference on high-nitrogen steels “HNS 2009”

A. G. Svyazhin, V. E. Kindop

Equipment and technology of the Paul Wurth Company – a way of lowering the production cost of pig iron

M. N. Suvorov

Technology for preparing coke for blast-furnace smelting and its efficiency

A. L. Podkorytov, A. M. Kuznetsov, E. N. Dymchenko, V. P. Padalka, S. L. Yaroshevskii, A. V. Kuzin

MHD processes in the electromagnetic stirring of liquid metal in continuous section and bloom casters

B. A. Sivak, V. G. Grachev, V. M. Parshin, A. D. Chertov, S. V. Zarubin, V. G. Fisenko, A. A. Solov’ev

Modernization of the mold suspension system of continuous casters

A. V. Kuklev, Yu. M. Aizin, I. F. Goncharevich, S. Yu. Boiko

Development of approaches for selecting the optimum alloying systems and production parameters for manufacturing hot-rolled high-strength low-alloy steels for automobile building

N. A. Rybkin, I. G. Rodionova, N. G. Shaposhnikov, V. V. Kuznetsov, P. A. Mishnev

Provision of property and cold strength uniformity with the falling weight test in coiled and sheet rolled product of steel Kh70 from a 2000 mill

N. V. Filatov, S. Yu. Nastich, A. V. Golovanov, S. S. Toropov, E. S. Popov, S. V. Soya

Effect of carbon content and stressed state on the corrosion rate of pipe steel in heating systems

V. G. Pleshivtsev, G. A. Filippov, Yu. A. Pak, O. V. Livanova

Controlled cooling of coils – an important factor in energy conservation for the hot-rolling of strip

V. V. Chashchin

Determination of the energy parameters for the smelting of manganese ferroalloys with increases in the electrode gap and electrode spacing

A. P. Shkirmontov

Method of predicting the physico-mechanical properties of two-component iron–copper composites

L. S. Kokhan, N. A. Farunda

Electromagnetic separation of nonferrous metals before a metallurgical conversion in a field of high-frequency current

G. B. Krivtsova, A. N. Pimenov, V. V. Petukhov