nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Strengthening of Low-Alloyed Steels by Carbides During Carbon-Black-Gas Carburizer Cementation

verfasst von : N. Kanatnikov, O. Ivanova, G. Harlamov

Erschienen in: Proceedings of the 4th International Conference on Industrial Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The technology of thermochemical strengthening of widely using low-alloyed steels 50HG, 50HF, and 50 HGF by carbides is proposed. The technology provides the self-sharpening of cutting tools during the organic material processing and consists in its saturation by the cementite followed by heat treating as the hardening with medium-temperature tempering. The influence of cementite particles on wear resistance of the cemented layers was investigated. It is shown that alloyed cementite can be applied to surface hardening of the details of tillage machines and tools for organic materials cutting.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel SPH Modeling and Experimental Study of Unidirectional Fiber-Reinforced Composite Cutting

Nächstes Kapitel Dynamics of Spindle Assembly Metal-Cutting Machine Tool with Anisotropic Elastic Support

Beer P, Rudnicki J, Ciupinski L, Djouadi MA, Nouveau C (2003) Modification by composite coatings of knives made of low alloy steel for wood machining purposes. Surf Coat Technol 174:434–439CrossRef

Facello A, Cavallo E, Magagnotti N, Paletto G, Spinelli R (2013) The effect of knife wear on chip quality and processing cost of chestnut and locust fuel wood. Biomass Bioenerg 59:468–476CrossRef

Karltun J, Vogel K, Bergstrand M, Eklund J (2016) Maintaining knife sharpness in industrial meat cutting: a matter of knife or meat cutter ability. Appl Ergon 56:92–100CrossRef

Spinelli R, Glushkov S, Markov I (2014) Managing chipper knife wear to increase chip quality and reduce chipping cost. Biomass Bioenerg 62:117–122CrossRef

Verhoeven JD, Pendray AH, Clark HF (2008) Wear tests of steel knife blades. Wear 265(7):1093–1099CrossRef

Vuorinen E, Ojala N, Heino V, Rau C, Gahm C (2016) Erosive and abrasive wear performance of carbide free bainitic steels–comparison of field and laboratory experiments. Tribol Int 98:108–115CrossRef

Rozanov AN (1954) Tverdost’ cementita (The hardness of cementite). Metalloved term obrab met 1:149–155 (in Russ.)

Bogachev IN, Rozhkova SB (1960) O tverdosti cementite (On the hardness of cementite). Litejnoe proizvod 5:34–36 (in Russ.)

Taran JuN, Novik VI (1967) Stroenie cementita belogo chuguna (Structure of cementite of white cast iron). Litejnoe proizvod 1:34–38 (in Russ.)

10.

Komanduri R, Hou ZB (2000) Thermal modeling of the metal cutting process: part I—temperature rise distribution due to shear plane heat source. Int J Mech Sci 42(9):1715–1752CrossRef

11.

Huang Y, Liang SY (2003) Cutting forces modeling considering the effect of tool thermal property—application to CBN hard turning. Int J Mach Tools Manuf 43(3):307–315MathSciNetCrossRef

12.

Karpat Y, Özel T (2006) Predictive analytical and thermal modeling of orthogonal cutting process—part I: predictions of tool forces, stresses, and temperature distributions. J Manuf Sci Eng 128(2):435–444CrossRef

13.

M’Saoubi R, Chandrasekaran H (2011) Experimental study and modelling of tool temperature distribution in orthogonal cutting of AISI 316L and AISI 3115 steels. Int J Adv Manuf Technol 56(9):865–877CrossRef

14.

Barsukov G, Zhuravleva T, Kozhus O (2017) Increasing of efficiency of environmentally friendly technology of AWJ of a glass fiber plastic. IOP Conf Ser Earth Environ Sci 50(1):012001CrossRef

15.

Karpat Y, Özel T (2008) Analytical and thermal modeling of high-speed machining with chamfered tools. J Manuf Sci Eng 130(1):011001CrossRef

16.

Outeiro JC, Pina JC, M’saoubi R, Pusavec F, Jawahir IS (2008) Analysis of residual stresses induced by dry turning of difficult-to-machine materials. CIRP Ann Manuf Technol 57(1):77–80CrossRef

17.

Özel T, Sima M, Srivastava AK, Kaftanoglu B (2010) Investigations on the effects of multi-layered coated inserts in machining Ti–6Al–4V alloy with experiments and finite element simulations. CIRP Ann Manuf Technol 59(1):77–82CrossRef

18.

Davies MA, Cao Q, Cooks AL, Ivester R (2003) On the measurement and prediction of temperature fields in machining AISI 1045 steel. CIRP Ann Manuf Technol 52(1):77–80CrossRef

19.

Arrazola PJ, Arriola I, Davies MA, Cooke AL, Dutterer BS (2008) The effect of machinability on thermal fields in orthogonal cutting of AISI 4140 steel. CIRP Ann Manuf Technol 57(1):65–68CrossRef

20.

Pereverzev VM (1977) Diffuzionnaja karbidizacija stali (Diffusion carbidization of steel). Izdatel’stvo Voronezhskogo universiteta, Voronezh (in Russ.)

21.

Pereverzev VM, Kolmykov VI, Vorotnikov VA (1990) Vlijanie karbidov na stojkost’ cementovannyh stalej k iznashivaniju v kvarcevom abrazive (Effect of carbides on the resistance of cemented steels to wear in quartz abrasives). Metalloved term obrab met 4:45–47 (in Russ.)

22.

McLellan RB, Dunn WW (1970) The thermodynamics of austenite. Scr Metall 4(5):321–326CrossRef

23.

Chipman J, Brush EF (1968) The activity of carbon in alloyed austenite at 1000 °C. Trans Met Soc AIME 242(1):35–41

24.

Benz R, Elliott JF, Chipman J (1974) Thermodynamics of the carbides in the system Fe–Cr–C. Metall Mater Trans B 5(10):2235–2240CrossRef

Titel: Strengthening of Low-Alloyed Steels by Carbides During Carbon-Black-Gas Carburizer Cementation
verfasst von: N. Kanatnikov
O. Ivanova
G. Harlamov
Verlag: Springer International Publishing
Buch: Proceedings of the 4th International Conference on Industrial Engineering
Print ISBN: 978-3-319-95629-9

Electronic ISBN: 978-3-319-95630-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95630-5_175

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht