Skip to main content
Erschienen in: Metallurgist 11-12/2021

05.04.2021

Study of Conditions for Thermal Deformation of Additively Grown Billets from VT6 Titanium Alloy using Finite Element Simulation

verfasst von: A. N. Koshmin, A. S. Aleschenko, P. V. Patrin, P. Yu. Sokolov, A. V. Zinov’ev

Erschienen in: Metallurgist | Ausgabe 11-12/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This article investigates the hot rolling aspects of a large-sized ring of non-standard, cross-sectional shape, produced from VT6 titanium alloy, and grown using additive technologies (АТ). Finite element (FE) simulation was used to develop the cross-sectional shape and study the parameters of the rolling process. The results enabled the choice of the optimal cross-sectional shape of the ring billet produced by direct laser deposition (DLD), and confirmed the possibility of processing the billet on a ring rolling mill.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat ASTM 52900-15. Standard Terminology for Additive Manufacturing. General Principles. Terminology. West Conshohocken, PA, ASTM Intern. (2015). ASTM 52900-15. Standard Terminology for Additive Manufacturing. General Principles. Terminology. West Conshohocken, PA, ASTM Intern. (2015).
2.
Zurück zum Zitat H. Bikas, P. Stavropoulos, and G. Chryssolouris, “Additive manufacturing methods and modeling approaches: a critical review,” Int. J. Adv. Manuf. Technol., 89, 389–405 (2016); doi.org/10.1007/s00170-015-7576-2. H. Bikas, P. Stavropoulos, and G. Chryssolouris, “Additive manufacturing methods and modeling approaches: a critical review,” Int. J. Adv. Manuf. Technol., 89, 389–405 (2016); doi.org/10.1007/s00170-015-7576-2.
3.
Zurück zum Zitat S. Tofail, E. Koumoulos, A. Bandyopadhyay, S. Bose, L. O’Donoghue, and C. Charitidis, “Additive manufacturing: scientific and technological challenges, market uptake and opportunities,” Mater. Today, 21, No. 1, 22–37 (2018); doi.org/10.1016/j.mattod.2017.07.001. S. Tofail, E. Koumoulos, A. Bandyopadhyay, S. Bose, L. O’Donoghue, and C. Charitidis, “Additive manufacturing: scientific and technological challenges, market uptake and opportunities,” Mater. Today, 21, No. 1, 22–37 (2018); doi.org/10.1016/j.mattod.2017.07.001.
4.
Zurück zum Zitat P. Petrovsky, V. Chevirikin, P. Sokolov, and A. Davidenko, “Dependence of the structure and properties of 03KH16N15M3 steel on the geometry of cellular structures obtained by the selective laser melting method,” Chern. Metally, No. 3, 49–53 (2019). P. Petrovsky, V. Chevirikin, P. Sokolov, and A. Davidenko, “Dependence of the structure and properties of 03KH16N15M3 steel on the geometry of cellular structures obtained by the selective laser melting method,” Chern. Metally, No. 3, 49–53 (2019).
5.
Zurück zum Zitat S. Thompson, L. Bian, N. Shamsaei, and A. Yadollahi, “An overview of Direct Laser Deposition for additive manufacturing. Part I: Transport phenomena, modeling and diagnostics,” Addit. Manuf., 8, 36–62 (2015); doi.org/10.1016/j.addma.2015.07.001. S. Thompson, L. Bian, N. Shamsaei, and A. Yadollahi, “An overview of Direct Laser Deposition for additive manufacturing. Part I: Transport phenomena, modeling and diagnostics,” Addit. Manuf., 8, 36–62 (2015); doi.org/10.1016/j.addma.2015.07.001.
6.
Zurück zum Zitat N. Shamsaei, A. Yadollahi, L. Bian, and S. Thompson, “An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control,” Addit. Manuf., 8, 12–35 (2015); doi.org/10.1016/j.addma.2015.07.002. N. Shamsaei, A. Yadollahi, L. Bian, and S. Thompson, “An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control,” Addit. Manuf., 8, 12–35 (2015); doi.org/10.1016/j.addma.2015.07.002.
7.
Zurück zum Zitat T. DebRoy, H. Wei, J. Zuback, T. Mukherjee, J. Elmer, J. Milewski, A. Beese, A. Wilson-Heid, A. De, and W. Zhang, “Additive manufacturing of metallic components — Process, structure and properties,” Prog. Mater. Sci., 92, 112–224 (2018); doi.org/10.1016/j.pmatsci.2017.10.001. T. DebRoy, H. Wei, J. Zuback, T. Mukherjee, J. Elmer, J. Milewski, A. Beese, A. Wilson-Heid, A. De, and W. Zhang, “Additive manufacturing of metallic components — Process, structure and properties,” Prog. Mater. Sci., 92, 112–224 (2018); doi.org/10.1016/j.pmatsci.2017.10.001.
8.
Zurück zum Zitat O. Klimova-Korsmik, G. Turichin, E. Zemlyakov, K. Babkin, P. Petrovsky, and A. Travyanov, “Technology of high-speed direct laser deposition from Ni-based superalloys,” Phys. Procedia, 83, 716–722 (2016); DOI.org/10.1016/j.phpro.2016.08.073. O. Klimova-Korsmik, G. Turichin, E. Zemlyakov, K. Babkin, P. Petrovsky, and A. Travyanov, “Technology of high-speed direct laser deposition from Ni-based superalloys,” Phys. Procedia, 83, 716–722 (2016); DOI.org/10.1016/j.phpro.2016.08.073.
9.
Zurück zum Zitat E. Brandl, C. Leyens, and F. Palm, “Mechanical properties of additive manufactured Ti-6Al-4V using wire and powder based processes,” Trends in Aerospace Manufacturing 2009 Int. Conf. IOP Conf. Series: Materials Science and Engineering, 26, No. 1, 012004 (2011); doi.org/10.1088/1757-899X/26/1/012004. E. Brandl, C. Leyens, and F. Palm, “Mechanical properties of additive manufactured Ti-6Al-4V using wire and powder based processes,” Trends in Aerospace Manufacturing 2009 Int. Conf. IOP Conf. Series: Materials Science and Engineering, 26, No. 1, 012004 (2011); doi.org/10.1088/1757-899X/26/1/012004.
10.
Zurück zum Zitat A. Mostafa, D. Shahriari, I. Picazo Rubio, V. Brailovski, M. Jahazi, and M. Medraj, “Hot compression behavior and microstructure of selectively laser-melted IN718 alloy,” Int. J. Adv. Manuf. Technol., 96, 371–385 (2018); doi.org/10.1007/s00170-017-1522-4. A. Mostafa, D. Shahriari, I. Picazo Rubio, V. Brailovski, M. Jahazi, and M. Medraj, “Hot compression behavior and microstructure of selectively laser-melted IN718 alloy,” Int. J. Adv. Manuf. Technol., 96, 371–385 (2018); doi.org/10.1007/s00170-017-1522-4.
11.
Zurück zum Zitat W. Schneller, M. Leitner, S. Springer, F. Grun, and M. Taschauer, “Effect of HIP treatment on microstructure and fatigue strength of selectively laser melted AlSi10Mg,” J. Manuf. Mater. Proc., 3(1), 16 (2019); doi.org/10.3390/jmmp3010016. W. Schneller, M. Leitner, S. Springer, F. Grun, and M. Taschauer, “Effect of HIP treatment on microstructure and fatigue strength of selectively laser melted AlSi10Mg,” J. Manuf. Mater. Proc., 3(1), 16 (2019); doi.org/10.3390/jmmp3010016.
12.
Zurück zum Zitat D. Ivanov, A. Travyanov, P. Petrovskiy, V. Cheverikin, E. Alekseeva, A. Khvan, and I. Logachev, “Evolution of structure and properties of the nickel-based alloy EP718 after the SLM growth and after different types of heat and mechanical treatment,” Addit. Manuf., 18, 269–275 (2017); doi.org/10.1016/j.addma.2017.10.015. D. Ivanov, A. Travyanov, P. Petrovskiy, V. Cheverikin, E. Alekseeva, A. Khvan, and I. Logachev, “Evolution of structure and properties of the nickel-based alloy EP718 after the SLM growth and after different types of heat and mechanical treatment,” Addit. Manuf., 18, 269–275 (2017); doi.org/10.1016/j.addma.2017.10.015.
13.
Zurück zum Zitat C. Qiu, N. Adkins, and M. Attallah, “Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V,” Mater. Sci. Eng. A, 578, 230–239 (2013); doi.org/10.1016/j.msea.2013.04.099. C. Qiu, N. Adkins, and M. Attallah, “Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V,” Mater. Sci. Eng. A, 578, 230–239 (2013); doi.org/10.1016/j.msea.2013.04.099.
14.
Zurück zum Zitat T. Mower and M. Long, “Mechanical behavior of additive manufactured, powder-bed laser-fused materials,” Mater. Sci. Eng. A, 651, 198–213 (2016); doi.org/10.1016/j.msea.2015.10.068. T. Mower and M. Long, “Mechanical behavior of additive manufactured, powder-bed laser-fused materials,” Mater. Sci. Eng. A, 651, 198–213 (2016); doi.org/10.1016/j.msea.2015.10.068.
15.
Zurück zum Zitat US 2015/0013144 A1. Methods for Producing Forged Products and Other Worked Products, Bush et al., United States, Pat. Application Public (2015). US 2015/0013144 A1. Methods for Producing Forged Products and Other Worked Products, Bush et al., United States, Pat. Application Public (2015).
16.
Zurück zum Zitat J. Donoghue, A. Antonysamy, F. Martina, P. Colegrove, S. Williams, and P. Prangnell, “The effectiveness of combining rolling deformation with Wire-Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V,” Mater. Characterization, 114, 103–114 (2016); doi.org/10.1016/j.matchar.2016.02.001. J. Donoghue, A. Antonysamy, F. Martina, P. Colegrove, S. Williams, and P. Prangnell, “The effectiveness of combining rolling deformation with Wire-Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V,” Mater. Characterization, 114, 103–114 (2016); doi.org/10.1016/j.matchar.2016.02.001.
17.
Zurück zum Zitat I. Polkin, “About innovations in the light alloys technology,” Tech. Light Alloys, No. 4, 8–15 (2018). I. Polkin, “About innovations in the light alloys technology,” Tech. Light Alloys, No. 4, 8–15 (2018).
18.
Zurück zum Zitat M. Donachie, Jr., “Titanium: a technical guide. 2nd Edition,” ASM International. Materials Park, 369 (2000). M. Donachie, Jr., “Titanium: a technical guide. 2nd Edition,” ASM International. Materials Park, 369 (2000).
19.
Zurück zum Zitat M. Brandt, Laser Additive Manufacturing: Materials, Design, Technologies, and Applications, Woodhead Publishing, Sawston (2017). M. Brandt, Laser Additive Manufacturing: Materials, Design, Technologies, and Applications, Woodhead Publishing, Sawston (2017).
20.
Zurück zum Zitat E. Brandl, B. Baufeld, C. Leyens, and R. Gault, “Additive manufactured Ti-6Al-4V using welding wire comparison of laser and arc beam deposition and evaluation with respect to aerospace material specifications,” Phys. Procedia, 5, 595–606 (2010); doi.org/10.1016/j.phpro.2010.08.087. E. Brandl, B. Baufeld, C. Leyens, and R. Gault, “Additive manufactured Ti-6Al-4V using welding wire comparison of laser and arc beam deposition and evaluation with respect to aerospace material specifications,” Phys. Procedia, 5, 595–606 (2010); doi.org/10.1016/j.phpro.2010.08.087.
21.
Zurück zum Zitat P. Sokolov, A. Aleshchenko, A. Koshmin, V. Cheverikin, P. Petrovskiy, A. Travyanov, and A. Sova, “Effect of hot rolling on structure and mechanical properties of Ti-6Al-4V alloy parts produced by direct laser deposition,” Int. J. Adv. Manuf. Technol. (2020); doi.org/10.1007/s00170-020-05132-0. P. Sokolov, A. Aleshchenko, A. Koshmin, V. Cheverikin, P. Petrovskiy, A. Travyanov, and A. Sova, “Effect of hot rolling on structure and mechanical properties of Ti-6Al-4V alloy parts produced by direct laser deposition,” Int. J. Adv. Manuf. Technol. (2020); doi.org/10.1007/s00170-020-05132-0.
23.
Zurück zum Zitat V. E. Antonyuk, P. A. Vityaz, P. A. Parkhomchik, V. V. Rudiy, and A. A. Shipko, Ring Rolling in the Production of Mechanical Engineering Parts [in Russian], Belarus, Navuka, Minsk (2013). V. E. Antonyuk, P. A. Vityaz, P. A. Parkhomchik, V. V. Rudiy, and A. A. Shipko, Ring Rolling in the Production of Mechanical Engineering Parts [in Russian], Belarus, Navuka, Minsk (2013).
24.
Zurück zum Zitat QForm VX Manual. Program for Modeling Metal Forming Processes. Version 9.0.4 (2019). QForm VX Manual. Program for Modeling Metal Forming Processes. Version 9.0.4 (2019).
25.
Zurück zum Zitat P. I. Polukhin, G. Ya. Gun, and A. M. Galkin, Resistance to Plastic Deformation of Metals and Alloys. Guidebook [in Russian], Metallurgiya, Moscow (1983). P. I. Polukhin, G. Ya. Gun, and A. M. Galkin, Resistance to Plastic Deformation of Metals and Alloys. Guidebook [in Russian], Metallurgiya, Moscow (1983).
Metadaten
Titel
Study of Conditions for Thermal Deformation of Additively Grown Billets from VT6 Titanium Alloy using Finite Element Simulation
verfasst von
A. N. Koshmin
A. S. Aleschenko
P. V. Patrin
P. Yu. Sokolov
A. V. Zinov’ev
Publikationsdatum
05.04.2021
Verlag
Springer US
Erschienen in
Metallurgist / Ausgabe 11-12/2021
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI
https://doi.org/10.1007/s11015-021-01108-x

Weitere Artikel der Ausgabe 11-12/2021

Metallurgist 11-12/2021 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.