nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.02.2012

The Comparative Effect of Sugarcane Juice on the Abrasion-Corrosion Behavior of Fe-Cr-B Electric Arc Sprayed and Fe-Cr-C Weld Coatings

verfasst von: Vernon E. Buchanan

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Abrasion-corrosion tests were conducted on two commonly Fe-Cr-C shielded metal arc welding (SMAW) hardfacings used in the sugar industry and an arc sprayed Fe-Cr-based coating. The tests were performed on a modified block-on-ring tester with the coatings sliding against compressed sugarcane fiber in the presence of abrasive slurry. The findings showed that, in the presence of sugarcane juice and sand slurry, the SMAW coatings had similar wear performance while the abrasive wear of the arc-sprayed coating was superior to the SMAW coatings. In the presence of a neutral solution, the material loss from the arc-sprayed coating was similar to that obtained in the sugarcane juice while the SMAW coatings showed a marked decrease; this demonstrated that the arc-sprayed coating was more desirable in an abrasive-corrosion environment. The study also showed that the resistance to material does not follow the expected trend, in which wear resistance increases with increasing hardness.

Vorheriger Artikel Tensile Properties and Work Hardening Behavior of Laser-Welded Dual-Phase Steel Joints

Nächster Artikel Influence of 2,3-Dihydroxyflavanone on Corrosion Inhibition of Mild Steel in Acidic Medium

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

N. Maier, The Cumulative Benefits of Surface Treatment of Rolls, Sugar Azucar, 1981, 76, p 60–65

J.L. Fluckiger, New Alternatives for the Reclamation and Coating of Mill Rolls, Sugar Azucar, 1991, 86, p 16–17, 20–22

T.S. Falkenhagen, Mill Rollers and Abrasion Resistant Surface Coatings for Mill Rollers, Australian Patent Office, No 707580, 1999

H.N. Farmer, Surfacing II: Weld Overlays That Resist Corrosion, Weld. Des. Fabr., 1976, p 56–59

R. Menon, New Developments in Hardfacing Alloys, Weld. J., 1996, 75, p 43–49

I.E. French and D. Klanjscek, Development of New Flux-Cored Electrodes for Arcing of Sugar Mill Roller Shells, Proc. 27th Natl. Conf. Australia Weld. Inst., Vol 27, 1979, p 29–37

M.L. Ted Guo, C.-H. Chiang, and C.Y.A. Tsao, Microstructure and Wear Behavior of Spray-Formed and Conventionally Cast Rolls of 18Cr-2.5Mo-Fe Alloy, Mater. Sci. Eng., 2002, A326, p 1–10

B.Q. Wang and M.W. Seitz, Comparison in Erosion Behavior of Iron-Base Coatings Sprayed by Three Different Arc-Spray Processes, Wear, 2001, 250, p 755–761CrossRef

T.T. Matsuo, C.S. Kiminami, W.J. Botta Fo, and C. Bolfarini, Sliding Wear of Spray-Formed High-Chromium White Cast Iron Alloys, Wear, 2005, 259, p 445–452CrossRef

10.

V.E. Buchanan, D.G. McCartney, and P.H. Shipway, A Comparison of the Abrasive Wear Behaviour of Iron-Chromium Based Hardfaced Coatings Deposited by SMAW and Electric Arc Spraying, Wear, 2008, 264, p 542–549CrossRef

11.

E.E. Underwood. Quantitative Metallography, Metals Handbook, 9th ed., Vol 9, Metallography and Structures, American Society for Metals, Metals Park, OH, 1985, p 123–134

12.

E. Rabinowicz, Friction and Wear of Materials, 2nd ed., John Wiley and Sons, Inc, New York, 1995

13.

S. Chatterjee and T.K. Pal, Wear Behaviour of Hardfacing Deposits on Cast Iron, Wear, 2003, 255, p 417–425CrossRef

14.

O.N. Dogan, G. Laird, II, and J.A. Hawk, Abrasion Resistance of the Columnar Zone in High Cr White Cast Irons, Wear, 1995, 181–183, p 342–349

15.

K. Kato, Micro-Mechanisms of Wear—Wear Modes, Wear, 1992, 153, p 277–295CrossRef

16.

K. Kato, Abrasive Wear of Metals, Tribol. Int., 1997, 30, p 333–338CrossRef

17.

K.-H. Zum Gahr, Wear by Hard Particles, Tribol. Int., 1998, 31, p 587–596CrossRef

18.

C.P. Cookson, Hardness [versus] Wear Resistance, Surf. J., 1982, 13, p 32–34

19.

K.-H. Zum Gahr and G.T. Eldis, Abrasive Wear of White Cast Irons, Wear, 1980, 64, p 175–194CrossRef

20.

M. Pourbaix, Atlas of Electrochemical Equilibria in Aqueous Solutions, Pergamon Press, London, 1966, p 312–313

21.

G. Reinhard, M. Radtke, and U. Ramelt, On the Role of the Salts of Weak Acids in the Chemical Passivation of Iron and Steel in Aqueous Solutions, Corros. Sci., 1992, 33, p 307–313CrossRef

22.

L.E. Svensson, B. Gretoft, B. Ulander, and H.K.D.H. Bhadeshia, Fe-Cr-C Hardfacing Alloys for High-Temperature Applications, J. Mater. Sci., 1986, 21, p 1015–1019CrossRef

23.

T.M. Devine and B.J. Drummond, Use of Accelerated Intergranular Corrosion Tests and Pitting Corrosion Tests to Detect Sensitisation and Susceptibility to Intergranular Stress Corrosion Cracking in High Temperature Water of Duplex 308 Stainless Steel, Corrosion, 1981, 37, p 104–115CrossRef

24.

T.C. Zhang, X.X. Jiang, S.Z. Li, and X.C. Lu, A Quantitative Estimation of the Synergy Between Corrosion and Abrasion, Corros. Sci., 1994, 36, p 1953–1962CrossRef

25.

F. Ferrer, H. Idrissi, H. Mazille, P. Fleischmann, and P. Labeeuw, A Study of Abrasion-Corrosion of AISI, 304L Stainless Steel in Saline Solution Using Acoustic Emission Technique, NDT&E Int., 2000, 33, p 363–371CrossRef

Titel: The Comparative Effect of Sugarcane Juice on the Abrasion-Corrosion Behavior of Fe-Cr-B Electric Arc Sprayed and Fe-Cr-C Weld Coatings
verfasst von: Vernon E. Buchanan
Publikationsdatum: 01.02.2012
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2012
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-011-9894-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2012

Experimental and Finite Element Investigation of Roll Drawing Process

Influence of 2,3-Dihydroxyflavanone on Corrosion Inhibition of Mild Steel in Acidic Medium

Resistance Spot Welding Characteristics and High Cycle Fatigue Behavior of DP 780 Steel Sheet

Composition-Property Correlation in B2O3-SiO2 Preform Rods Produced Using Modified Chemical Vapor Deposition Technique

Shock-Wave Attenuation and Energy-Dissipation Potential of Granular Materials

Influences of Welding Speed on Tensile Properties of Friction Stir Welded AZ61A Magnesium Alloy

Premium Partner

Marktübersichten