nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

13.08.2021 | ORIGINAL ARTICLE

The effect of using repetitively pulsed laser radiation in selective laser melting when creating a metal-matrix composite Ti-6Al-4V–B₄C

verfasst von: Alexander Golyshev, Alexander Malikov, Anatoliy Orishich, Mikhail Gulov, Alexei Ancharov

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 5-6/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A metal-matrix composite based on Ti-6Al-4V–B₄C with TiB, TiB₂ and TiC inclusions was successfully obtained as a result of in situ synthesis using repetitively pulsed laser radiation. For the first time, the phase composition of the obtained metal-matrix composite was studied using synchrotron radiation. A comparison of the effect of using continuous and pulsed-periodic radiation in selective laser melting on the microstructure and mechanical properties of coatings was made. The use of repetitively pulsed radiation made it possible to form more uniform structures and to improve the mechanical properties of metal-matrix coatings in comparison with the continuous mode of exposure. It has been established that the use of repetitively pulsed radiation and the formation of TiB₂, TiB, TiC phases made it possible to increase the wear resistance of the formed composite by a factor of 6 in comparison with the Ti-6Al-4V metal coating.

Vorheriger Artikel Analysis of discharge channel characteristics based on three-phase flow dielectric characteristics in USV-MF assisted WEDM-LS

Nächster Artikel Sensor-integrated tap holder for process uncertainty detection based on tool vibration and axial length compensation sensors

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

DebRoy T, Wei HL, Zuback JS, Mukherjee T, Elmer JW, Milewski JO, Beese AM, Wilson-Heid A, De A, Zhang W (2018) Additive manufacturing of metallic components—process, structure and properties. Prog Mater Sci 92:112–224. https://doi.org/10.1016/j.pmatsci.2017.10.001CrossRef

Miracle DB (2005) Metal matrix composites—from science to technological significance. Compos Sci Technol 65:2526–2540. https://doi.org/10.1016/j.compscitech.2005.05.027CrossRef

Aramian A, Razavi SMJ, Sadeghian Z, Berto F (2020) A review of additive manufacturing of cermets. Addit Manuf 33:101130. https://doi.org/10.1016/j.addma.2020.101130CrossRef

Fomin VM, Golyshev AA, Kosarev VF, Malikov AG, Orishich AM, Ryashin NS, Filippov AA, Shikalov VS (2017) Creation of heterogeneous materials on the basis of B4C and Ni powders by the method of cold spraying with subsequent layer-by-layer laser treatment. J Appl Mech Tech Phys 58:947–955. https://doi.org/10.1134/S0021894417050224CrossRef

Krakhmalev P, Yadroitsev I (2014) Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti-SiC powder mixtures. Intermetallics 46:147–155. https://doi.org/10.1016/j.intermet.2013.11.012CrossRef

Hong C, Gu D, Dai D, Alkhayat M, Urban W, Yuan P, Cao S, Gasser A, Weisheit A, Kelbassa I, Zhong M, Poprawe R (2015) Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: tailored microstructures and enhanced performance. Mater Sci Eng A 635:118–128. https://doi.org/10.1016/j.msea.2015.03.043CrossRef

Pouzet S, Peyre P, Gorny C, Castelnau O, Baudin T, Brisset F, Colin C, Gadaud P (2016) Additive layer manufacturing of titanium matrix composites using the direct metal deposition laser process. Mater Sci Eng A 677:171–181. https://doi.org/10.1016/J.MSEA.2016.09.002CrossRef

Cai C, Song B, Qiu C, Li L, Xue P, Wei Q, Zhou J, Nan H, Chen H, Shi Y (2017) Hot isostatic pressing of in-situ TiB/Ti-6Al-4V composites with novel reinforcement architecture, enhanced hardness and elevated tribological properties. J Alloys Compd 710:364–374. https://doi.org/10.1016/j.jallcom.2017.03.160CrossRef

Ravi Chandran KS, Panda KB, Sahay SS (2004) TiBw-reinforced Ti composites: processing, properties, application prospects, and research needs. JOM 56:42–48. https://doi.org/10.1007/s11837-004-0127-1CrossRef

10.

Vilardell AM, Fredriksson G, Yadroitsev I, Krakhmalev P (2019) Fracture mechanisms in the as-built and stress-relieved laser powder bed fusion Ti6Al4V ELI alloy. Opt Laser Technol 109:608–615. https://doi.org/10.1016/j.optlastec.2018.08.042CrossRef

11.

Tang M, Zhang L, Zhang N (2021) Microstructural evolution, mechanical and tribological properties of TiC/Ti6Al4V composites with unique microstructure prepared by SLM. Mater Sci Eng A 814:141187. https://doi.org/10.1016/j.msea.2021.141187CrossRef

12.

Chen R, Fang H, Chen X, Su Y, Ding H, Guo J, Fu H (2017) Formation of TiC/Ti 2 AlC and α 2 +γ in in-situ TiAl composites with different solidification paths. Intermetallics 81:9–15. https://doi.org/10.1016/j.intermet.2017.02.025CrossRef

13.

Yi M, Zhang X, Liu G, Wang B, Shao H, Qiao G (2018) Comparative investigation on microstructures and mechanical properties of (TiB + TiC)/Ti-6Al-4V composites from Ti-B4C-C and Ti-TiB2-TiC systems. Mater Charact 140:281–289. https://doi.org/10.1016/j.matchar.2018.04.010CrossRef

14.

Lee TW, Lee CH (1999) Microstructure and mechanical properties of TiB2/TiAl composites produced by reactive sintering using a powder extrusion technique. J Mater Sci Lett 18:801–803. https://doi.org/10.1023/A:1006645302032CrossRef

15.

Li S, Kondoh K, Imai H, Chen B, Jia L, Umeda J, Fu Y (2016) Strengthening behavior of in situ-synthesized (TiC–TiB)/Ti composites by powder metallurgy and hot extrusion. Mater Des 95:127–132. https://doi.org/10.1016/j.matdes.2016.01.092CrossRef

16.

Bhowmick S, Sun G, Alpas AT (2016) Low friction behaviour of boron carbide coatings (B4C) sliding against Ti–6Al–4V. Surf Coat Technol 308:316–327. https://doi.org/10.1016/j.surfcoat.2016.05.092CrossRef

17.

Zhao Y, Yu T, Sun J, Jiang S (2020) Microstructure and properties of laser cladded B4C/TiC/Ni-based composite coating. Int J Refract Met Hard Mater 86:105112. https://doi.org/10.1016/j.ijrmhm.2019.105112CrossRef

18.

Du B, Paital SR, Dahotre NB (2008) Phase constituents and microstructure of laser synthesized TiB2–TiC reinforced composite coating on steel. Scr Mater 59:1147–1150. https://doi.org/10.1016/j.scriptamat.2008.07.035CrossRef

19.

Li J, Yu Z, Wang H, Li M (2010) Microstructural characterization of titanium matrix composite coatings reinforced by in situ synthesized TiB + TiC fabricated on Ti6Al4V by laser cladding. Rare Metals 29:465–472. https://doi.org/10.1007/s12598-010-0151-yCrossRef

20.

Bai LL, Li J, Chen JL, Song R, Shao JZ, Qu CC (2016) Effect of the content of B4C on microstructural evolution and wear behaviors of the laser-clad coatings fabricated on Ti6Al4V. Opt Laser Technol 76:33–45. https://doi.org/10.1016/j.optlastec.2015.07.010CrossRef

21.

Li J, Yu Z, Wang H, Li M (2010) Microstructural evolution of titanium matrix composite coatings reinforced by in situ synthesized TiB and TiC by laser cladding. Int J Miner Metall Mater 17:481–488. https://doi.org/10.1007/s12613-010-0345-1CrossRef

22.

Kooi B, Pei Y, De Hosson JT (2003) The evolution of microstructure in a laser clad TiB–Ti composite coating. Acta Mater 51:831–845. https://doi.org/10.1016/S1359-6454(02)00475-5CrossRef

23.

Nartu MSKKY, Mantri SA, Pantawane MV, Ho Y-H, McWilliams B, Cho K, Dahotre NB, Banerjee R (2020) In situ reactions during direct laser deposition of Ti-B4C composites. Scr Mater 183:28–32. https://doi.org/10.1016/j.scriptamat.2020.03.021CrossRef

24.

Xia M, Liu A, Hou Z, Li N, Chen Z, Ding H (2017) Microstructure growth behavior and its evolution mechanism during laser additive manufacture of in-situ reinforced (TiB+TiC)/Ti composite. J Alloys Compd 728:436–444. https://doi.org/10.1016/j.jallcom.2017.09.033CrossRef

25.

Tijo D, Masanta M (2017) Mechanical performance of in-situ TiC-TiB2 composite coating deposited on Ti-6Al-4V alloy by powder suspension electro-discharge coating process. Surf Coat Technol 328:192–203. https://doi.org/10.1016/J.SURFCOAT.2017.08.048CrossRef

26.

Tijo D, Masanta M, Das AK (2018) In-situ TiC-TiB2 coating on Ti-6Al-4V alloy by tungsten inert gas (TIG) cladding method: Part-I. Microstructure evolution. Surf Coat Technol 344:541–552. https://doi.org/10.1016/J.SURFCOAT.2018.03.082CrossRef

27.

An Q, Huang L, Jiang S, Li X, Gao Y, Liu Y, Geng L (2017) Microstructure evolution and mechanical properties of TIG cladded TiB reinforced composite coating on Ti-6Al-4V alloy. Vacuum. 145:312–319. https://doi.org/10.1016/J.VACUUM.2017.09.019CrossRef

28.

Tijo D, Masanta M (2019) Effect of Ti/B4C ratio on the microstructure and mechanical characteristics of TIG cladded TiC-TiB2 coating on Ti-6Al-4V alloy. J Mater Process Technol 266:184–197. https://doi.org/10.1016/j.jmatprotec.2018.11.005CrossRef

29.

Liu J, Liu Z (2010) An experimental study on synthesizing TiC–TiB2–Ni composite coating using electro-thermal explosion ultra-high speed spraying method. Mater Lett 64:684–687. https://doi.org/10.1016/j.matlet.2009.12.038CrossRef

30.

Ravnikar D, Dahotre NB, Grum J (2013) Laser coating of aluminum alloy EN AW 6082-T651 with TiB2 and TiC: microstructure and mechanical properties. Appl Surf Sci 282:914–922. https://doi.org/10.1016/j.apsusc.2013.06.089CrossRef

31.

Diao Y, Zhang K (2015) Microstructure and corrosion resistance of TC2 Ti alloy by laser cladding with Ti/TiC/TiB 2 powders. Appl Surf Sci 352:163–168. https://doi.org/10.1016/j.apsusc.2015.04.030CrossRef

32.

Wang R, Gu D, Chen C, Dai D, Ma C, Zhang H (2020) Formation mechanisms of TiB2 tracks on Ti6Al4V alloy during selective laser melting of ceramic-metal multi-material. Powder Technol 367:597–607. https://doi.org/10.1016/j.powtec.2020.04.027CrossRef

33.

Meng QW, Geng L, Zhang BY (2006) Laser cladding of Ni-base composite coatings onto Ti-6Al-4V substrates with pre-placed B4C + NiCrBSi powders. Surf Coat Technol 200:4923–4928. https://doi.org/10.1016/j.surfcoat.2005.04.059CrossRef

34.

LEI Y, WANG Z, CHEN X (2011) Effect of arc-ultrasound on microstructures and mechanical properties of plasma arc welded joints of SiCp/Al MMCs. Trans Nonferrous Metals Soc China 21:272–277. https://doi.org/10.1016/S1003-6326(11)60709-7CrossRef

35.

He L, Wu M, Li L, Hao H (2006) Ultrasonic generation by exciting electric arc: a tool for grain refinement in welding process. Appl Phys Lett 89:131504. https://doi.org/10.1063/1.2357857CrossRef

36.

Dai W-L (2003) Effects of high-intensity ultrasonic-wave emission on the weldability of aluminum alloy 7075-T6. Mater Lett 57:2447–2454. https://doi.org/10.1016/S0167-577X(02)01262-4CrossRef

37.

Qingmei L, Yong Z, Yaoling S, Feipeng Q, Qijie Z (2007) Influence of ultrasonic vibration on mechanical properties and microstructure of 1Cr18Ni9Ti stainless steel. Mater Des 28:1949–1952. https://doi.org/10.1016/j.matdes.2006.04.025CrossRef

38.

Wu W (2000) Influence of vibration frequency on solidification of weldments. Scr Mater 42:661–665. https://doi.org/10.1016/S1359-6462(99)00416-9CrossRef

39.

Xu Z, Yan J, Wu G, Kong X, Yang S (2005) Interface structure of ultrasonic vibration aided interaction between Zn–Al alloy and Al2O3p/6061Al composite. Compos Sci Technol 65:1959–1963. https://doi.org/10.1016/j.compscitech.2005.02.004CrossRef

40.

Kumar S, Wu CS, Padhy GK, Ding W (2017) Application of ultrasonic vibrations in welding and metal processing: a status review. J Manuf Process 26:295–322. https://doi.org/10.1016/j.jmapro.2017.02.027CrossRef

41.

Chmielewski T, Golański DA (2011) New method of in-situ fabrication of protective coatings based on Fe–Al intermetallic compounds. Proc Inst Mech Eng Part B J Eng Manuf 225:611–616. https://doi.org/10.1177/2041297510394050CrossRef

42.

Piekoszewski J, Krajewski A, Prokert F, Senkara J, Stanisławski J, Waliś L, Werner Z, Włosiński W (2003) Brazing of alumina ceramics modified by pulsed plasma beams combined with arc PVD treatment. Vacuum. 70:307–312. https://doi.org/10.1016/S0042-207X(02)00660-7CrossRef

43.

G.Z. (Grigoriĭ Z. Gershuni, D.V. (Dmitriĭ V. Li͡ubimov, Thermal vibrational convection, John Wiley & Sons, 1998.

44.

Kawaji M, Liang RQ, Nasr-Esfahany M, Simic-Stefani S, Yoda S (2006) The effect of small vibrations on Marangoni convection and the free surface of a liquid bridge. Acta Astronaut 58:622–632. https://doi.org/10.1016/j.actaastro.2006.03.002CrossRef

45.

Yang S, Liang R, Yan F, Gao T, Feng Y (2015) Thermocapillary convection and surface fluctuation in a liquid bridge under lateral vibrations. Microgravity Sci Technol 27:1–10. https://doi.org/10.1007/s12217-014-9407-8CrossRef

46.

Malov AN, Orishich AM (2014) Ultimate energy characteristics of a mechanically Q-switched CO2 LASER. Tech Phys Lett 40:170–173. https://doi.org/10.1134/S1063785014020242CrossRef

47.

Golyshev AA, Orishich AM, Filippov AA (2019) Similarity laws in laser cladding of cermet coatings. J Appl Mech Tech Phys 60:758–767. https://doi.org/10.1134/S0021894419040217CrossRef

48.

A.I. Ancharov, A.Y. Manakov, N.A. Mezentsev, B.P. Tolochko, M.A. Sheromov, V.M. Tsukanov, New station at the 4th beamline of the VEPP-3 storage ring, Nucl. Instruments Methods Phys. Res. Sect. A Accel. Spectrometers, Detect. Assoc. Equip. 470 (2001) 80–83. https://doi.org/10.1016/S0168-9002(01)01029-4.

49.

Golyshev A, Orishich A (2020) Microstructure and mechanical characterization of TI6AL4V-B4C metal ceramic alloy, produced by laser powder-bed fusion additive manufacturing. Int J Adv Manuf Technol 109:579–588. https://doi.org/10.1007/s00170-020-05509-1CrossRef

Titel: The effect of using repetitively pulsed laser radiation in selective laser melting when creating a metal-matrix composite Ti-6Al-4V–B4C
verfasst von: Alexander Golyshev
Alexander Malikov
Anatoliy Orishich
Mikhail Gulov
Alexei Ancharov
Publikationsdatum: 13.08.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 5-6/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07842-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5-6/2021

Analytical, FEA, and experimental research of 2D-Vibration Assisted Cutting (2D-VAC) in titanium alloy Ti6Al4V

Chatter stability prediction and detection during high-speed robotic milling process based on acoustic emission technique

Grinding performance evaluation of 3D-printed porous metal-bonded grinding wheel in BK7 glass grinding

Parametric analysis of turning HSLA steel under minimum quantity lubrication (MQL) and nanofluids-based minimum quantity lubrication (NF-MQL): a concept of one-step sustainable machining

Investigation of forging performance for AA6082

Tensile properties of the FFF-processed thermoplastic polyurethane (TPU) elastomer

Premium Partner

Marktübersichten