nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Thermal Analysis of a Cylindrical Sintered Wick Heat Pipe

verfasst von : Faiza Mohamed Nasir, Mohd. Zulkifly Abdullah, Fairosidi Idrus

Erschienen in: Advanced Engineering for Processes and Technologies

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The aim of this paper is to present approaches undertaken in analysing the thermal performance of a cylindrical heat pipe with copper-sintered wick. The approaches employed are the thermal resistance network, the lumped capacitance method (LCM) and two-dimensional numerical CFD simulation. The predicted variation of the evaporator temperature with different heat inputs were compared against experimental data. The accuracy of the prediction was also determined by finding the percentage difference of the calculated results with that from the experiments. All methods have shown to produce results that are in good agreement with the experimental works. The best method is the LCM, giving predictions that deviate from experimental data by as much as 3.9%, followed by the thermal resistance network and the numerical simulation with maximum percentage differences of 4.6 and 9.8%, respectively.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel The Effect of Cutting Fluid Condition on Surface Roughness in Turning of Alloy Steel

Nächstes Kapitel Three Point Bending Analysis on the Side Impact Beam of a Perodua Kancil

Tu, S.-T., Zhang, H., Zhou, W.-W.: Corrosion failures of high temperature heat pipes. Eng. Fail. Anal. 6, 363–370 (1999). https://doi.org/10.1016/S1350-6307(98)00057-0CrossRef

Ting, C., Chen, C.: Analyzing the heat transfer property of heat pipe influenced by integrated cooling apparatus. Chin. J. Eng. 2014, 1–10 (2014)CrossRef

Yang, X., Yan, Y.Y., Mullen, D.: Recent developments of lightweight, high performance heat pipes. Appl. Therm. Eng. 33–34, 1–14 (2012). https://doi.org/10.1016/j.applthermaleng.2011.09.006CrossRef

Faghri, A.: Heat pipes: review, opportunities and challenges. Front. Heat Pipes 5 (2014) https://doi.org/10.5098/fhp.5.1

Nandy, P., Ariantara, B., Pamungkas, R.A.: Experimental investigation on performance of lithium-ion battery thermal management system using flat plate loop heat pipe for electric vehicle application. Appl. Therm. Eng. 9, 1616–1620 (2016). https://doi.org/10.1016/j.applthermaleng.2016.01.123CrossRef

Murashko, K., Pyrhönen, J., Laurila, L.: Optimization of the passive thermal control system of a lithium-ion battery with heat pipes embedded in an aluminum plate. In: 2013 15th European Conference on Power Electronics and Applications, EPE 2013, pp. 1–10 (2013)

Tran, T.-H., Harmand, S., Desmet, B., Filangi, S.: Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery. Appl. Therm. Eng. 63, 551–558 (2014). https://doi.org/10.1016/j.applthermaleng.2013.11.048CrossRef

Zhao, R., Gu, J., Liu, J.: An experimental study of heat pipe thermal management system with wet cooling method for lithium ion batteries. J. Power Sources 273, 1089–1097 (2015). https://doi.org/10.1016/j.jpowsour.2014.10.007CrossRef

Chan, C.W., Siqueiros, E., Ling-Chin, J., et al.: Heat utilisation technologies: a critical review of heat pipes. Renew. Sustain. Energy Rev. 50, 615–627 (2015). https://doi.org/10.1016/j.rser.2015.05.028CrossRef

10.

Nookaraju, B.C., Rao, P.S.V.K., Nagasarada, S.: Experimental and numerical analysis of thermal performance in heat pipes. Proc. Eng. 127, 800–808 (2015). https://doi.org/10.1016/j.proeng.2015.11.415CrossRef

11.

Khalili, M., Shafii, M.B.: Experimental and numerical investigation of the thermal performance of a novel sintered-wick heat pipe. Appl. Therm. Eng. 94, 59–75 (2016). https://doi.org/10.1016/j.applthermaleng.2015.10.120CrossRef

12.

Chnookaraju, B., Kurmarao, P.S.V., Sarada, S.N.: Thermal analysis of gravity effected sintered wick heat pipe. Mater. Today Proc. 2, 2179–2187 (2015). https://doi.org/10.1016/j.matpr.2015.07.230CrossRef

13.

Jouhara, H., Fadhl, B., Wrobel, L.C.: Three-dimensional CFD simulation of geyser boiling in a two-phase closed thermosyphon. Int. J. Hydrogen Energy 44, 1–14 (2016). https://doi.org/10.1016/j.ijhydene.2016.02.038CrossRef

14.

Sukchana, T., Pratinthong, N.: A two-phase closed thermosyphon with an adiabatic section using a flexible hose and R-134a filling. Exp. Therm. Fluid Sci. 77, 317–326 (2016). https://doi.org/10.1016/j.expthermflusci.2016.04.027CrossRef

15.

Fadhl, B., Wrobel, L.C., Jouhara, H.: CFD modelling of a two-phase closed thermosyphon charged with R134a and R404a. Appl. Therm. Eng. 78, 482–490 (2015). https://doi.org/10.1016/j.applthermaleng.2014.12.062CrossRef

16.

Mroue, H., Ramos, J.B., Wrobel, L.C., Jouhara, H.: Experimental and numerical investigation of an air-to-water heat pipe-based heat exchanger. Appl. Therm. Eng. 78, 339–350 (2015). https://doi.org/10.1016/j.applthermaleng.2015.01.005CrossRef

17.

Esarte, J., Bernardini, A., Blanco, J.M., Sancibrian, R.: Optimizing the design for a two-phase cooling loop heat pipe: part A: numerical model, validation and application to a case study. Appl. Therm. Eng. 99, 892–904 (2016). https://doi.org/10.1016/j.applthermaleng.2016.01.150CrossRef

18.

Nishikawara, M., Nagano, H.: Parametric experiments on a miniature loop heat pipe with PTFE wicks. Int. J. Therm. Sci. 85, 29–39 (2014). https://doi.org/10.1016/j.ijthermalsci.2014.05.016CrossRef

19.

Wu, S.C., Wang, D., Chen, Y.M.: Investigating the effect of double-layer wick thickness ratio on heat transfer performance of loop heat pipe. Int. J. Therm. Sci. 86, 292–298 (2014). https://doi.org/10.1016/j.ijthermalsci.2014.07.014CrossRef

20.

Pouryoussefi, S.M., Zhang, Y.: Numerical investigation of chaotic flow in a 2D closed-loop pulsating heat pipe. Appl. Therm. Eng. 98, 617–627 (2016). https://doi.org/10.1016/j.applthermaleng.2015.12.097CrossRef

21.

Mameli, M., Manno, V., Filippeschi, S., Marengo, M.: Thermal instability of a closed loop pulsating heat pipe: combined effect of orientation and filling ratio. Exp. Therm. Fluid Sci. 59, 222–229 (2014). https://doi.org/10.1016/j.expthermflusci.2014.04.009CrossRef

22.

Naik, R., Varadarajan, V., Pundarika, G., Narasimha, K.R.: Experimental investigation and performance evaluation of a closed loop pulsating heat pipe. J. Appl. Fluid Mech. 6, 267–275 (2013). https://doi.org/10.4028/www.scientific.net/AMM.592-594.1554CrossRef

23.

Cheng, P.J., Lin, D.T.W., Liu, W.M., et al.: The study of an innovative heat removal model of the aluminum-acetone flat plate heat pipe on high power leds. Trans. Can Soc. Mech. Eng. 39, 739–748 (2015)CrossRef

24.

Oro, M.V., Bazzo, E.: Flat heat pipes for potential application in fuel cell cooling. Appl. Therm. Eng. 90, 848–857 (2015). https://doi.org/10.1016/j.applthermaleng.2015.07.055CrossRef

25.

Chen, J.S., Chou, J.H.: Cooling performance of flat plate heat pipes with different liquid filling ratios. Int. J. Heat Mass Transf. 77, 874–882 (2014). https://doi.org/10.1016/j.ijheatmasstransfer.2014.06.029CrossRef

26.

Solomon, A.B., Sekar, M., Yang, S.H.: Analytical expression for thermal conductivity of heat pipe. Appl. Therm. Eng. 100, 462–467 (2016). https://doi.org/10.1063/1.3386464CrossRef

27.

Ferrandi, C., Iorizzo, F., Mameli, M., et al.: Lumped parameter model of sintered heat pipe: Transient numerical analysis and validation. Appl. Therm. Eng. 50, 1280–1290 (2013). https://doi.org/10.1016/j.applthermaleng.2012.07.022CrossRef

28.

Kumar, V., Gangacharyulu, D., Tathgir, R.G.: Heat transfer studies of a heat pipe. Heat Transf. Eng. 28, 954–965 (2007). https://doi.org/10.1080/01457630701421810CrossRef

29.

Faghri, A., Harley, C.: Transient lumped heat pipe analyses. Heat Recover. Syst. CHP 14, 351–363 (1994). https://doi.org/10.1016/0890-4332(94)90039-6CrossRef

30.

Liu, F., Lan, F., Chen, J.: Dynamic thermal characteristics of heat pipe via segmented thermal resistance model for electric vehicle battery cooling. J. Power Sources 321, 57–70 (2016). https://doi.org/10.1016/j.jpowsour.2016.04.108CrossRef

31.

Mahdavi, M., Qiu, S.: Mathematical modeling and analysis of steady state performance of a heat pipe network. Appl. Therm. Eng. 91, 556–573 (2015). https://doi.org/10.1016/j.applthermaleng.2015.08.017CrossRef

32.

Zhang, P., Wang, B., Shi, W., et al.: Modeling and performance analysis of a two-phase thermosyphon loop with partially/fully liquid-filled downcomer. Int. J. Refrig. 58, 172–185 (2015). https://doi.org/10.1016/j.ijrefrig.2015.06.014CrossRef

33.

Tsai, T.-E., Wu, G.-W., Chang, C.-C., et al.: Dynamic test method for determining the thermal performances of heat pipes. Int. J. Heat Mass Transf. 53, 4567–4578 (2010). https://doi.org/10.1016/j.ijheatmasstransfer.2010.06.037CrossRefMATH

34.

Mistry, P.R., Thakkar, F.M., De, S., DasGupta, S.: Experimental validation of a two-dimensional model of the transient and steady-state characteristics of a wicked heat pipe. Exp. Heat Transf. 23, 333–348 (2010). https://doi.org/10.1080/08916150903564804CrossRef

35.

Ismail, K.A.R., Zanardit, M.A.: A steady-state model for heat pipes of cross-sections. Appl. Therm. Eng. 16,753–767 (1996)

36.

Tournier, J.-M., El-Genk, M.S.: A heat pipe transient analysis model. Int. J. Heat Mass Transf. 37, 753–762 (1994). https://doi.org/10.1016/0017-9310(94)90113-9CrossRefMATH

37.

Elnaggar, M.H.A., Abdullah, M.Z., Munusamy, S.R.R.: Experimental and numerical studies of finned L-shape heat pipe for notebook-PC cooling. IEEE Trans. Compon. Packag. Manuf. Technol. 3, 978–988 (2013). https://doi.org/10.1109/TCPMT.2013.2245944CrossRef

38.

Annamalai, S., Ramalingam, V.: Experimental investigation and CFD analysis of a air cooled condenser heat pipe. Therm. Sci. 15, 759–772 (2011). https://doi.org/10.2298/TSCI100331023ACrossRef

39.

Huminic, G., Huminic, A.: CFD study of the heat pipes with water-nanoparticles mixture. In: EASC 4th European Automotive Simulation Conference (2009)

40.

Lin, Z., Wang, S., Shirakashi, R., Winston Zhang, L.: Simulation of a miniature oscillating heat pipe in bottom heating mode using CFD with unsteady modeling. Int. J. Heat Mass Transf. 57, 642–656 (2013). https://doi.org/10.1016/j.ijheatmasstransfer.2012.09.007CrossRef

41.

Alizadehdakhel, A., Rahimi, M., Alsairafi, A.A.: CFD modeling of flow and heat transfer in a thermosyphon. Int. Commun. Heat Mass Transf. 37, 312–318 (2010). https://doi.org/10.1016/j.icheatmasstransfer.2009.09.002CrossRef

42.

Legierski, J., Wiecek, B., de Mey, G.: Measurements and simulations of transient characteristics of heat pipes. Microelectron. Reliab. 46, 109–115 (2006). https://doi.org/10.1016/j.microrel.2005.06.003CrossRef

43.

Idrus, F., Mohamad, N., Zailani, R., et al.: Thermal performance of a cylindrical heat pipe for different heat inputs and inclination angles. Appl. Mech. Mater. 661, 148–153 (2014). https://doi.org/10.4028/www.scientific.net/AMM.661.148CrossRef

44.

Peterson, G.P.: An Introduction to Heat Pipes; Modelling, Testing, and Applications. Wiley, New York (1994)

45.

Chi, S.: Heat Pipe Theory and Practice: A Sourcebook (Series in Thermal and Fluids Engineering). McGraw-Hill Inc., USA (1976)

46.

El-Nasr, A.A., El-Haggar, S.M.: Effective thermal conductivity of heat pipes. Heat Mass Transf. 32, 97–101 (1996). https://doi.org/10.1007/s002310050097CrossRef

Titel: Thermal Analysis of a Cylindrical Sintered Wick Heat Pipe
verfasst von: Faiza Mohamed Nasir
Mohd. Zulkifly Abdullah
Fairosidi Idrus
Verlag: Springer International Publishing
Buch: Advanced Engineering for Processes and Technologies
Print ISBN: 978-3-030-05620-9

Electronic ISBN: 978-3-030-05621-6

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-030-05621-6_28

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht