nach oben

Journal of Polymer Research

Erschienen in:

01.12.2021 | Original paper

Thermally conducting hybrid polycarbonate composites with enhanced electromagnetic shielding efficiency

verfasst von: Subhransu S. Pradhan, Lakshmi Unnikrishnan, Smita Mohanty, Manoranjan Biswal, Sanjay K. Nayak

Erschienen in: Journal of Polymer Research | Ausgabe 12/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The recent work evaluates the effect of ethylene methacrylate (EMA) as an impact modifier and the hybrid filler constitutes graphite flakes (GF), multiwalled carbon nanotubes (MWCNT), and steel fibers (SF) for the development of polycarbonate (PC) based conducting composite with high thermal conductivity and EMI shielding. The samples were initially optimized based on their mechanical properties, which were further characterized by thermal conductivity (TC) and electromagnetic interference shielding effectiveness (EMI SE). The thermal conductivity of the polycarbonate (PC) nanocomposites was found to increase by ~ 451% and ~ 602% at a significantly higher filler loading of 20 wt% and 30 wt% respectively without any processing difficulties. Further, the EMI SE values of the same have been enhanced in the range of -40.2 dB and -46.4 dB respectively, which falls within the range of commercially acceptable limits. Nonetheless, the results were indicative of the creation of a conductive network through the matrix, the electron microscopic and diffractometric studies confirmed the optimum dispersion of the hybrid filler system within the PC matrix.

Vorheriger Artikel Synthesis and antibacterial property of polyamide dendrimers based on tetraethyl-1,1,3,3-propanetetracarboxylate

Nächster Artikel Ethylbenzene oxidation over KIT-6 mesoporous silica-based hybrid supported catalysts

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Pradhan SS, Unnikrishnan L, Mohanty S, Nayak SK (2021) Effect of graphite flake and multi-walled carbon nanotube on thermal, mechanical, electrical, and electromagnetic interference shielding properties of polycarbonate nanocomposite. Polym Compos 1–13. https://doi.org/10.1002/pc.26115

Pradhan SS, Unnikrishnan L, Mohanty S, Nayak SK (2020) Thermally Conducting Polymer Composites with EMI Shielding : A review. https://doi.org/10.1007/s11664-019-07908-xCrossRef

Fukuyama Y, Senda M, Kawai T et al (2014) The effect of the addition of polypropylene-grafted SiO2 nanoparticle on the thermal conductivity of isotactic polypropylene. J Therm Anal Calorim 117(3):1397–1405. https://doi.org/10.1007/s10973-014-3881-5CrossRef

Harish S, Ishikawa K, Einarsson E et al (2012) Enhanced thermal conductivity of ethylene glycol with single-walled carbon nanotube inclusions. Int J Heat Mass Transf 55(13–14):3885–3890. https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.001CrossRef

Zhou T, Wang X, Liu X, Xiong D (2010) Improved thermal conductivity of epoxy composites using a hybrid multi-walled carbon nanotube/micro-SiC filler. Carbon N Y 48(4):1171–1176. https://doi.org/10.1016/j.carbon.2009.11.040CrossRef

Fang X, Ding Q, Fan L-W et al (2013) Thermal Conductivity Enhancement of Ethylene Glycol-Based Suspensions in the Presence of Silver Nanoparticles of Various Shapes. J Heat Transfer 136(3):034501. https://doi.org/10.1115/1.4025663CrossRef

Jagadeesh, Dani, Krishnan Kanny, and K. Prashantha. "A review on research and development of green composites from plant protein‐based polymers." Polymer Composites 38.8 (2017): 1504-1518.CrossRef

Guo J, Saha P, Liang J, Saha M, Grady BP (2013) Multi-walled carbon nanotubes coated by multi-layer silica for improving thermal conductivity of polymer composites. J Therm Anal Calorim 113(2):467–474. https://doi.org/10.1007/s10973-012-2902-5CrossRef

Harada M, Hamaura N, Ochi M, Agari Y (2013) Thermal conductivity of liquid crystalline epoxy/BN filler composites having ordered network structure. Compos Part B Eng 55:306–313. https://doi.org/10.1016/j.compositesb.2013.06.031CrossRef

10.

Yu S, Kim DK, Park C, Hong SM, Koo CM (2014) Thermal conductivity behavior of SiC-Nylon 6,6 and hBN-Nylon 6,6 composites. Res Chem Intermed 40(1):33–40. https://doi.org/10.1007/s11164-013-1452-1CrossRef

11.

Samy MM, Mohamed MG, El-Mahdy AFM, Mansoure TH, Wu KCW, Kuo SW (2021) High-Performance Supercapacitor Electrodes Prepared from Dispersions of Tetrabenzonaphthalene-Based Conjugated Microporous Polymers and Carbon Nanotubes. ACS Appl Mater Interfaces. https://doi.org/10.1021/acsami.1c05720CrossRefPubMed

12.

Samy MM, Mohamed MG, Kuo SW (2020) Pyrene-functionalized tetraphenylethylene polybenzoxazine for dispersing single-walled carbon nanotubes and energy storage. Compos Sci Technol 199(May):108360. https://doi.org/10.1016/j.compscitech.2020.108360CrossRef

13.

Zhang F, Li Q, Liu Y, Zhang S, Wu C, Guo W (2016) Improved thermal conductivity of polycarbonate composites filled with hybrid exfoliated graphite/multi-walled carbon nanotube fillers. J Therm Anal Calorim 123(1):431–437. https://doi.org/10.1007/s10973-015-4903-7CrossRef

14.

Ha SM, Kwon OH, Oh YG et al (2015) Thermally conductive polyamide 6/carbon filler composites based on a hybrid filler system. Sci Technol Adv Mater 16(6). https://doi.org/10.1088/1468-6996/16/6/065001

15.

Teng CC, Ma CCM, Chiou KC, Lee TM, Shih YF (2011) Synergetic effect of hybrid boron nitride and multi-walled carbon nanotubes on the thermal conductivity of epoxy composites. Mater Chem Phys 126(3):722–728. https://doi.org/10.1016/j.matchemphys.2010.12.053CrossRef

16.

Yu W, Xie H, Chen L, Wang M, Wang W (2017) Synergistic Thermal Conductivity Enhancement of PC/ABS Composites Containing Alumina/ Magnesia/Graphene Nanoplatelets. Polym Compos 10(38):2221–2227. https://doi.org/10.1002/pc.23802

17.

Pak SY, Kim HM, Kim SY, Youn JR (2012) Synergistic improvement of thermal conductivity of thermoplastic composites with mixed boron nitride and multi-walled carbon nanotube fillers. Carbon N Y 50(13):4830–4838. https://doi.org/10.1016/j.carbon.2012.06.009CrossRef

18.

Noh YJ, Kim SY (2015) Synergistic improvement of thermal conductivity in polymer composites filled with pitch based carbon fiber and graphene nanoplatelets. Polym Test 45:132–138. https://doi.org/10.1016/j.polymertesting.2015.06.003CrossRef

19.

Sandip Maiti BBK (2015) Graphene Nanoplate and Multiwall Carbon Nanotube-Embedded Polycarbonate Hybrid Composites: High Electromagnetic Interference Shielding With Low Percolation Threshold. Polym Compos. https://doi.org/10.1002/pc.23384CrossRef

20.

Babal AS, Gupta R, Singh BP, Singh VN, Dhakate SR, Mathur RB (2014) Mechanical and electrical properties of high performance MWCNT/polycarbonate composites prepared by an industrial viable twin screw extruder with back flow channel. RSC Adv 4(110):64649–64658. https://doi.org/10.1039/c4ra11319eCrossRef

21.

Ameli A, Nofar M, Wang S, Park CB (2014). Lightweight Polypropylene / Stainless-Steel Fiber Composite Foams with Low Percolation for E ffi cient Electromagnetic Interference Shielding. https://doi.org/10.1021/am500445gCrossRef

22.

Satapathy BK, Weidisch R, Pötschke P, Janke A (2005) Crack toughness behaviour of multiwalled carbon nanotube (MWNT)/polycarbonate nanocomposites. Macromol Rapid Commun 26(15):1246–1252. https://doi.org/10.1002/marc.200500234CrossRef

23.

Bagotia N, Singh BP, Choudhary V, Sharma DK (2015) Excellent impact strength of ethylene-methyl acrylate copolymer toughened polycarbonate. RSC Adv 5(106):87589–87597. https://doi.org/10.1039/c5ra18024dCrossRef

24.

Park DH, Lee YK, Park SS, Lee CS, Kim SH, Kim WN (2013) Effects of hybrid fillers on the electrical conductivity and EMI shielding efficiency of polypropylene/conductive filler composites. Macromol Res 21(8):905–910. https://doi.org/10.1007/s13233-013-1104-8CrossRef

25.

Ofoegbu SU, Ferreira MGS, Zheludkevich ML (2019) Galvanically stimulated degradation of carbon-fiber reinforced polymer composites: A critical review. Materials (Basel) 12(4). https://doi.org/10.3390/ma12040651

26.

Vigneshkumar S, Rajasekaran T (2018) Experimental analysis on tribological behavior of fiber reinforced composites. IOP Conf Ser Mater Sci Eng 402(1):0–12. https://doi.org/10.1088/1757-899X/402/1/012198

27.

Falat T, Felba J, Matkowski P et al (2011) Electrical, thermal and mechanical properties of epoxy composites with hybrid micro- and nano-sized fillers for electronic packaging. Proc IEEE Conf Nanotechnol 97–101. https://doi.org/10.1109/NANO.2011.6144654

28.

Wang JZXQY (2018) pte Ac ce d M pt. Smart Mater Struct 0–8.

29.

Wang L, Qiu J, Sakai E (2015) Thermal Behavior and Mechanical Properties of Nanocomposites of Polycarbonate Reinforced With Multiwalled Carbon Nanotubes. Polym Compos. https://doi.org/10.1002/pcPOLYMER

30.

Kim HS, Kim JH, Yang CM, Kim SY (2017) Synergistic enhancement of thermal conductivity in composites filled with expanded graphite and multi-walled carbon nanotube fillers via melt-compounding based on polymerizable low-viscosity oligomer matrix. J Alloys Compd 690:274–280. https://doi.org/10.1016/j.jallcom.2016.08.141CrossRef

31.

Agari Y, Tanaka M, Nagai S, Uno T (1987) Thermal conductivity of a polymer composite filled with mixtures of particles. J Appl Polym Sci 34(4):1429–1437. https://doi.org/10.1002/app.1987.070340408CrossRef

32.

Nayak SK, Mohanty S, Nayak SK (2019) Silver (Ag) nanoparticle-decorated expanded graphite (EG) epoxy composite: evaluating thermal and electrical properties. J Mater Sci Mater Electron 30(23):20574–20587. https://doi.org/10.1007/s10854-019-02423-5CrossRef

33.

Poosala A, Kurdsuk W, Aussawasathien D, Pentrakoon D (2014) Graphene nanoplatelet/multi-walled carbon nanotube/polycarbonate hybrid nanocomposites for electrostatic dissipative applications: Preparation and properties. Chiang Mai J Sci 41(5–2):1274–1286

34.

Bagotia N, Choudhary V, Sharma DK (2017) Studies on toughened polycarbonate/multiwalled carbon nanotubes nanocomposites. Compos Part B Eng 124:101–110. https://doi.org/10.1016/j.compositesb.2017.05.037CrossRef

35.

Bagotia N, Choudhary V, Sharma DK (2019) Synergistic Effect of Graphene/Multiwalled Carbon Nanotube Hybrid Fillers on Mechanical, Electrical and EMI Shielding Properties of Polycarbonate/Ethylene Methyl Acrylate Nanocomposites. Vol 159. Elsevier Ltd. https://doi.org/10.1016/j.compositesb.2018.10.009

36.

Maiti S, Khatua BB (2011) Properties of Polycarbonate (PC)/Multi-Wall Carbon Nanotube (MWCNT) Nanocomposites Prepared by Melt Blending. J Nanosci Nanotechnol 11(10):8613–8620. https://doi.org/10.1166/jnn.2011.4879CrossRefPubMed

37.

Rejisha CP, Soundararajan S, Sivapatham N, Palanivelu K (2014) Effect of MWCNT on Thermal, Mechanical, and Morphological Properties of Polybutylene Terephthalate/Polycarbonate Blends. J Polym 2014:1–7. https://doi.org/10.1155/2014/157137CrossRef

38.

Ferreira C, Kuester S, Merlini C et al (2016) Processing and characterization of conductive composites based on poly ( styrene-b-ethylene-ran-butylene-b-styrene ) ( SEBS ) and carbon additives : A comparative study of expanded graphite and carbon black 84:236–247. https://doi.org/10.1016/j.compositesb.2015.09.001

39.

Chung DDL (2000) Materials for Electromagnetic Interference Shielding 9(June):350–354

40.

Kashi S, Gupta RK, Baum T, Kao N, Bhattacharya SN (2016) Morphology, electromagnetic properties and electromagnetic interference shielding performance of poly lactide / graphene nanoplatelet nanocomposites. JMADE 95:119–126. https://doi.org/10.1016/j.matdes.2016.01.086CrossRef

41.

Lin J, Lin Z, Pan Y, Huang C, Chen C, Lou C (2015) Polymer Composites Made of Multi-Walled Carbon Nanotubes and Graphene Nano-Sheets: Effects of Sandwich Structures on their Electromagnetic Interference Shielding Effectiveness. Compos Part B. https://doi.org/10.1016/j.compositesb.2015.11.014CrossRef

42.

Chauhan SS, Abraham M, Choudhary V (2016) RSC Advances Electromagnetic shielding and mechanical properties of thermally stable poly ( ether ketone )/ multi-walled carbon nanotube composites prepared using a twin-screw extruder equipped with novel fractional mixing elements †. RSC Adv 6:113781–113790. https://doi.org/10.1039/C6RA22969GCrossRef

43.

Online VA, Gupta R, Singh VN, Mathur RB, Dhakate SR (2014). RSC Adv. https://doi.org/10.1039/C4RA11319ECrossRef

44.

Lecocq H, Garois N, Lhost O, Girard PF, Cassagnau P, Serghei A (2019) Polypropylene/carbon nanotubes composite materials with enhanced electromagnetic interference shielding performance: Properties and modeling. Compos Part B Eng 2020(189):107866. https://doi.org/10.1016/j.compositesb.2020.107866CrossRef

45.

Dhawan TLDÆPSÆSK (2009) Improved Electromagnetic Interference Shielding Properties of MWCNT – PMMA Composites Using Layered Structures. 327–334. https://doi.org/10.1007/s11671-008-9246-x

Titel: Thermally conducting hybrid polycarbonate composites with enhanced electromagnetic shielding efficiency
verfasst von: Subhransu S. Pradhan
Lakshmi Unnikrishnan
Smita Mohanty
Manoranjan Biswal
Sanjay K. Nayak
Publikationsdatum: 01.12.2021
Verlag: Springer Netherlands
Erschienen in: Journal of Polymer Research / Ausgabe 12/2021
Print ISSN: 1022-9760
Elektronische ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-021-02823-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2021

Influence of PA6 particle filler on morphology, crystallization behavior and dynamic mechanical properties of poly(ε-caprolactone) as an efficient nucleating agent

Chiral discrimination of enantiomers based on different interactions with alterable chiral oligomer

Ethylbenzene oxidation over KIT-6 mesoporous silica-based hybrid supported catalysts

Improvement in antibacterial activity of Poly Vinyl Pyrrolidone/Chitosan incorporated by graphene oxide NPs via laser ablation

Study on high temperature composite properties of ternary fluor rubber filled with nano-cerium oxide

Effect of flame retardant on the physical and mechanical properties of natural rubber and sugarcane bagasse composites

Premium Partner

Marktübersichten