nach oben

Steel in Translation

Erschienen in:

01.06.2023

Thermokinetic Diagrams of Transformations in Supercooled Austenite in Alloyed Steels

verfasst von: M. V. Maisuradze, A. A. Kuklina, D. I. Lebedev, E. V. Antakov, Yu. V. Yudin

Erschienen in: Steel in Translation | Ausgabe 6/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Industrial alloyed steels were investigated. Transformations in supercooled austenite upon continuous cooling was analyzed by dilatometry, and thermokinetic diagrams for the studied steels in the cooling rate range from 0.1 to 30°C/s were built based on obtained results. The influence of alloying elements on the stability of supercooled austenite and on the structure formation upon thermal treatment was shown. Statistical analysis of the results allowed finding analytical dependences which relate the chemical composition of the steels with their properties: temperatures of onset of bainite and austenite formation, stability of austenite.

Vorheriger Artikel Deviation from Roundness of Cylindrical Parts from Steel 45 with Reversible SPD

Nächster Artikel New Generation High-Strength Cold-Resistant Steels: History, Current Status and Development Prospects

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Steel and Its Heat Treatment: Handbook, Holm, T., Olsson, P., and Troell, E., Eds., Swerewa IVF, 2012.

Popova, L.E. and Popov, A.A., Diagrammy prevrashcheniya austenita v stalyakh i beta-rastvora v splavakh titana. Spravochnik (Phase Diagrams of Austenite Transformation in Steels and Beta-Solution in Titanium Alloys: Reference Book), Moscow: Metallurgiya, 1991.

Atkins, M., Atlas of Continuous Cooling Transformation Diagrams for Engineering Steels, British Steel Corporation, 1980.

Vander Voort, G.F., Atlas of Time-Temperature Diagrams for Irons and Steels, ASM Int, 1991.

Lakhtin, Yu.M., Metallovedenie i termicheskaya obrabotka metallov (Metal Science and Heat Treatment of Metals), Moscow: Metallurgiya, 1993.

Metallovedenie i termicheskaya obrabotka stali (Metal Science and Heat Treatment of Steels), vol. 1: Metody ispytanii i issledovaniya (Methods of Testing and Inspection), Moscow: Metallurgiya, 1983.

Kargul, T., Wielgosz, E., and Falkus, J., Application of thermal analysis tests results in the numerical simulations of continuous casting process, Arch. Metall. Mater., 2015, vol. 60, no. 1, pp. 221–225. https://doi.org/10.1515/amm-2015-0035CrossRef

Korchunov, A.G., Gun, G.S., Pivovarova, K.G., and Shiryaev, O.P., Study of structural transformation of hot-rolled carbon billets for high-strength ropes for responsible applications via the method of thermal analysis, CIS Iron Steel Rev., 2017, vol. 13, pp. 38–40. https://doi.org/10.17580/cisisr.2017.01.08CrossRef

Krielaart, G.P., Brakman, C.M., and Van Der Zwaag, S., Analysis of phase transformation in Fe–C alloys using differential scanning calorimetry, J. Mater. Sci., 1996, vol. 31, no. 6, pp. 1501–1508. https://doi.org/10.1007/bf00357859CrossRef

10.

Moravec, J., Mičian, M., Málek, M., and Švec, M., Determination of CCT diagram by dilatometry analysis of high-strength low-alloy S960MC steel, Materials, 2022, vol. 15, no. 13, p. 4637. https://doi.org/10.3390/ma15134637CrossRef

11.

Mandal, G., Dey, I., Mukherjee, S., and Ghosh, S., Phase transformation and mechanical properties of ultrahigh strength steels under continuous cooling conditions, J. Mater. Res. Technol., 2022, vol. 19, pp. 628–642. https://doi.org/10.1016/j.jmrt.2022.05.033CrossRef

12.

Bräutigam–matus, K., Altamirano, G., Salinas, A., Flores, A., and Goodwin, F., Experimental determination of continuous cooling transformation (CCT) diagrams for dual-phase steels from the intercritical temperature range, Metals, 2018, vol. 8, no. 9, p. 674. https://doi.org/10.3390/met8090674CrossRef

13.

Costa, P., Altamirano-Guerrero, G., Salinas-Rodriguez, A., Salas-Reyes, A.E., and Goodwin, F., Dilatometric study of continuous cooling transformation of intercritical austenite in cold rolled AHSS-DP steels, J. Mater. Res. Technol., 2022, vol. 19, pp. 4360–4370. https://doi.org/10.1016/j.jmrt.2022.06.140CrossRef

14.

ASTM A1033-18: Standard practice for quantitative measurement and reporting of hypoeutectoid carbon and low-alloy steel phase transformations, 2018.

15.

Kop, T.A., Sietsma, J., and Van Der Zwaag, S., Dilatometric analysis of phase transformations in hypo-eutectoid steels, J. Mater. Sci., 2001, vol. 36, no. 2, pp. 519–526. https://doi.org/10.1023/A:1004805402404CrossRef

16.

Maisuradze, M.V., Ryzhkov, M.A., and Surnaeva, O.A., Transformations of supercooled austenite in promising high-hardenability machine steels, Met. Sci. Heat Treat., 2018, vol. 60, nos. 5–6, pp. 339–347. https://doi.org/10.1007/s11041-018-0281-7CrossRef

17.

Maisuradze, M.V., Ryzhkov, M.A., Antakov, E.V., Popov, N.A., and Proskuryakov, P.A., Special features of transformations of supercooled austenite in modern structural steels, Met. Sci. Heat Treat., 2020, vol. 62, nos. 7–8, pp. 448–456. https://doi.org/10.1007/s11041-020-00583-4CrossRef

18.

Maisuradze, M.V. and Ryzhkov, M.A., Investigation and numerical simulation of the high strength silicon steel phase transformations and microstructure, Mater. Perform. Charact., 2018, vol. 8, no. 2, pp. 50–65. https://doi.org/10.1520/MPC20180012CrossRef

19.

Maisuradze, M.V., Lebedev, D.I., Ryzhkov, M.A., Korelin, A.V., and Proskuryakov, P.A., Formation of the microstructure and mechanical properties of aircraft steel under continuous cooling, Stal’, 2022, no. 1, pp. 56–63.

20.

Maisuradze, M.V. and Kuklina, A.A., Numerical and experimental investigation of the heat treated steel part microstructure and hardness, Mater. Sci. Forum, 2019, vol. 946, pp. 346–350. doi 10.4028/www.scientific.net/MSF.946.346

21.

Maisuradze, M.V. and Lebedev, D.I., The chemical composition effect of medium-carbon chromomanganesemolybdenum steel on the structure of drill pipes, Steel Transl., 2019, vol. 49, no. 11, pp. 813–818. https://doi.org/10.3103/S096709121911010XCrossRef

22.

Maisuradze, M.V., Ryzhkov, M.A., and Kuklina, A.A., Phase transformations in D6AC steel during continuous cooling, 2017, vol. 265, pp. 712–716. https://doi.org/10.4028/www.scientific.net/SSP.265.712

23.

Maisuradze, M., Yudin, Yu.V., Kuklina, A., and Lebedev, D., Effect of heat treatment on mechanical properties and microstructure of advanced high-strength steel, Met. Sci. Heat Treat., 2023, vol. 64, nos. 9–10, pp. 522–527. https://doi.org/10.1007/s11041-023-00845-xCrossRef

24.

Maisuradze, M.V., Lebedev, D.I., Kuklina, A.A., Antakov, E.V., and Nazarova, V.A., Mechanical properties of alloyed steel grades with superior stability of supercooled austenite, Steel Transl., 2022, vol. 52, no. 3, pp. 355–362. https://doi.org/10.3103/S0967091222030093CrossRef

25.

Koistinen, D.P. and Marburger, R.E., A general equation prescribing the extent of the austenite-martensite transformation in pure iron–carbon alloys and plain carbon steels, Acta Metall., 1959, vol. 7, no. 1, pp. 59–60.CrossRef

26.

Zhao, Z., Liu, C., Liu, Yu., and Northwood, D., A new empirical formula for the bainite upper temperature limit of steel, J. Mater. Sci., 2001, vol. 36, no. 20, pp. 5045–5056. https://doi.org/10.1023/A:1011874708194CrossRef

27.

Haynes, A.G. and Steven, W., The temperature of formation of martensite and bainite in low-alloy steel, J. Iron Steel Inst., 1956, vol. 183, no. 8, pp. 349–359.

28.

Andrews, K.W., Empirical formulae for the calculation of some transformation temperatures, J. Iron Steel Inst., 1965, vol. 203, no. 7, pp. 721–727.

29.

Sverdlin, A.V. and Ness, A.R., The effects of alloying elements on the heat treatment of steel, Steel Heat Treatment Handbook, New York: Marcel Dekker, 1997.

Titel: Thermokinetic Diagrams of Transformations in Supercooled Austenite in Alloyed Steels
verfasst von: M. V. Maisuradze
A. A. Kuklina
D. I. Lebedev
E. V. Antakov
Yu. V. Yudin
Publikationsdatum: 01.06.2023
Verlag: Pleiades Publishing
Erschienen in: Steel in Translation / Ausgabe 6/2023
Print ISSN: 0967-0912
Elektronische ISSN: 1935-0988
DOI: https://doi.org/10.3103/S0967091223060098

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2023

Comparing the Use of Molecular Iodine and Copper(II) Compounds as an Oxidizing Agent of Metals and Alloys under Regeneration thereof in the Course of Processing

Influence of Billet Geometry on the Deformed State of a Steel Ball during Hot Stamping

Formation of Chemical and Structural Heterogeneity in the Axial Zone of Continuously Cast Slabs

New Generation High-Strength Cold-Resistant Steels: History, Current Status and Development Prospects

Deviation from Roundness of Cylindrical Parts from Steel 45 with Reversible SPD

Effect of Factors of Technological Heredity on the Quality Indices of Adhesive and Glue-Welded Joints Manufactured under Different Temperature Conditions

Premium Partner

Marktübersichten