nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Thermomechanical Elastic–Plastic Stability and Failure Analysis of FGM Plate

verfasst von : Kanishk Sharma, Dinesh Kumar

Erschienen in: Emerging Trends of Advanced Composite Materials in Structural Applications

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A mathematical model based on the first-order shear deformation theory and the von Karman’s nonlinear kinematics for buckling, postbuckling and failure analysis of elastic–plastic Functionally Graded Material (FGM) plate under thermomechanical is presented. The FGM plate with continuously varying properties along thickness is modeled as a laminate composed of multiple perfectly-bonded layers made of isotropic and homogeneous material having layer-wise constant composition. The thermoelastic properties of FGM are calculated using rule of mixtures and Tamura-Tomota-Ozawa model (TTO model). Whereas, the elastic–plastic material properties are evaluated in accordance with the TTO model, assuming the ceramic phase of FGM to be elastic and the metal phase to be elastic–plastic. Further, the elastic–plastic analysis of FGM is assumed to follow J₂-plasticity with isotropic hardening. Parametric studies are conducted to investigate the effects of plasticity, material inhomogeneity, and thermomechanical loading conditions on the elastic–plastic buckling, postbuckling behavior, and the ultimate load capacity of FGM plate. The postbuckling response of FGM plate is found to be greatly affected by the plasticity consideration. FGM plate with elastic material properties exhibited a continuous increase in the postbuckling strength; whereas, the postbuckling strength of an elastic–plastic FGM plate decreases initially and finally, ultimate failure of the plate occurs.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Material Characterization of Hybrid FRP Bars

Nächstes Kapitel Buckling of Laminated Composite Plate with Imperfections Subjected to In-Plane Pulse Loads

ANSYS Inc (2014) ANSYS mechanical theory reference: release 15.0. Canonsburg PA, USA

Arbocz J, Conferenza italiana dei superiori maggiori (1987) Buckling and post-buckling: four lectures in experimental, numerical, and theoretical solid mechanics based on talks given at the CISM-meeting, held in Udine, Italy, 29 Sept–3 Oct 1985

Bandyopadhyay A et al (2000) Mechanical properties of interconnected phase alumina-Al composites. In: Pro SFF, pp 24–31

Bao G, Wang L (1995) Multiple cracking in functionally graded ceramic/metal coatings. Int J Solids Struct 32(19):2853–2871CrossRef

Barbero EJ (2013) Finite element analysis of composite materials using ANSYS^®. CRC Press

Bazant ZP, Cedolin L, Hutchinson JW (1993) Stability of structures: elastic, inelastic, fracture, and damage theories. J Appl Mech. https://doi.org/10.1115/1.2900839

Bhattacharyya M, Kapuria S, Kumar AN (2007) On the stress to strain transfer ratio and elastic deflection behavior for Al/SiC functionally graded material. Mech Adv Mater Struct 14(4):295–302. https://doi.org/10.1080/15376490600817917CrossRef

Chakrabarty J (2012) Theory of plasticity. Elsevier

Choules BD, Kokini K (1996) Architecture of functionally graded ceramic coatings against surface thermal fracture. J Eng Mater Tech Am Soc Mech Eng 118(4):522–528CrossRef

Cinefra M, Soave M (2011) Accurate vibration analysis of multilayered plates made of functionally graded materials. Mech Adv Mater Struct 18(1):3–13. https://doi.org/10.1080/15376494.2010.519204CrossRef

Cinefra M et al (2010) Thermo-mechanical analysis of functionally graded shells. J Therm Stresses 33(10):942–963. https://doi.org/10.1080/01495739.2010.482379CrossRef

El-Sawy KM, Nazmy AS, Martini MI (2004) Elasto-plastic buckling of perforated plates under uniaxial compression. Thin Wall Struct 42:1083–1101. https://doi.org/10.1016/j.tws.2004.03.002

Estefen SF, Chujutalli JH, Soares CG (2016) Influence of geometric imperfections on the ultimate strength of the double bottom of a Suezmax tanker. Eng Struct 127:287–303. https://doi.org/10.1016/j.engstruct.2016.08.036CrossRef

Ghavami K, Khedmati MR (2006) Numerical and experimental investigations on the compression behaviour of stiffened plates. J Constr Steel Res. https://doi.org/10.1016/j.jcsr.2006.06.026CrossRef

Giannakopoulos AE et al (1995) Elastoplastic analysis of thermal cycling: layered materials with compositional gradients. Acta Metall Mater 43(4):1335–1354. https://doi.org/10.1016/0956-7151(94)00360-T

Gunes R et al (2011) The elasto-plastic impact analysis of functionally graded circular plates under low-velocities. Compos Struct 93(2):860–869. https://doi.org/10.1016/j.compstruct.2010.07.008CrossRef

Hill R (1998) The mathematical theory of plasticity. Oxford University Press

Howard SJ, Tsui YC, Clyne TW (1994) The effect of residual stresses on the debonding of coatings—I. A model for delamination at a bimaterial interface. Acta Metall Mater 42(8):2823–2836CrossRef

Huang H, Han Q (2014) Elastoplastic buckling of axial loaded functionally graded material cylindrical shells. Compos Struct 117:135–142. https://doi.org/10.1016/j.compstruct.2014.06.018CrossRef

Jin Z-H (2002) An asymptotic solution of temperature field in a strip a functionally graded material. Int Commun Heat Mass Transfer 29(7):887–895. https://doi.org/10.1016/S0735-1933(02)00409-8CrossRef

Jin ZH, Paulino GH, Dodds RH (2003) Cohesive fracture modeling of elastic–plastic crack growth in functionally graded materials. Eng Fract Mech 70(14):1885–1912. https://doi.org/10.1016/S0013-7944(03)00130-9CrossRef

Mahamood RM, Akinlabi ET (2017) Types of functionally graded materials and their areas of application. In: Functionally graded materials. Springer, pp 9–21

Narayanan R, Chow FY (1984) Ultimate capacity of uniaxially compressed perforated plates. Thin-Wall Struct 2(3):241–264. https://doi.org/10.1016/0263-8231(84)90021-1CrossRef

Paik JK (2005) Ultimate strength of dented steel plates under edge shear loads. Thin-Wall Struct 43(9):1475–1492. https://doi.org/10.1016/j.tws.2005.03.011CrossRef

Reddy JN (2003) Mechanics of laminated composite plates and shells: theory and analysis, p 840. https://doi.org/10.1007/978-1-4471-0095-9.

Reddy JN (2004) An introduction to nonlinear finite element analysis. Oxford University Press

Reddy JN, Chin CD (1998) Thermomechanical analysis of functionally graded cylinders and plates. J Therm Stress 21(6):593–626. https://doi.org/10.1080/01495739808956165CrossRef

Shakeri M, Mirzaeifar R (2009) Static and dynamic analysis of thick functionally graded plates with piezoelectric layers using layerwise finite element model. Mech Adv Mater Struct 16(8):561–575. https://doi.org/10.1080/15376490802625514CrossRef

Shakeri M, Akhlaghi M, Hoseini SM (2006) Vibration and radial wave propagation velocity in functionally graded thick hollow cylinder. Compos Struct 76(1–2):174–181. https://doi.org/10.1016/j.compstruct.2006.06.022CrossRef

Shanmugam NE, Thevendran V, Tan YH (1999) Design formula for axially compressed perforated plates, vol 34, pp 1–20

Shao ZS (2005) Mechanical and thermal stresses of a functionally graded circular hollow cylinder with finite length. Int J Press Vessels Pip 82(3):155–163. https://doi.org/10.1016/j.ijpvp.2004.09.007CrossRef

Sharma K, Kumar D (2017a) Elastoplastic stability and failure analysis of FGM plate with temperature dependent material properties under thermomechanical loading. Latin Am J Solids Struct. https://doi.org/10.1590/1679-78253747

Sharma K, Kumar D (2017b) Elastoplastic analysis of FGM plate with a central cutout of various shapes under thermomechanical loading. J Therm Stress. https://doi.org/10.1080/01495739.2017.1323566

Sharma K, Kumar D (2018) Nonlinear stability analysis of a perforated FGM plate under thermal load. Mech Adv Mater Struct 25(2):100–114. https://doi.org/10.1080/15376494.2016.1255817CrossRef

Shiota I, Miyamoto Y (1997) Functionally graded materials 1996. Elsevier

Singh SB, Kumar A (1999) Postbuckling response and strength of laminates under combined in-plane loads. Compos Sci Technol 59(5):727–736. https://doi.org/10.1016/S0266-3538(98)00125-0CrossRef

Soh AK, Bian LC, Chakrabarty J (2000) Elastic/plastic buckling of a composite flat plate subjected to uniform edge compression. Thin-Wall Struct 38(3):247–265. https://doi.org/10.1016/S0263-8231(00)00038-0CrossRef

Suresh S, Mortensen A (1998) Fundamentals of functionally graded materials. The Institute of Materials

Tamura I, Tomato Y, Ozawa H (1973) Strength and ductility of Fe–Ni–C alloys composed of austenite and martensite with various strength. In: Proceedings of the third conference on strength of metals and alloys, vol 1(4). Institute of Metals, Cambridge, pp 611–616

Touloukian YS, Center TPR (1967) Thermophysical properties of high temperature solid materials. vol 1. Elements.-Pt. 1. Macmillan

Williamson RL, Rabin BH, Byerly GE (1995) FEM study of the effects of interlayers and creep in reducing residual stresses and strains in ceramic-metal joints. Compos Eng 5(7):851–863. https://doi.org/10.1016/0961-9526(95)00035-LCrossRef

Yaghoobi H et al (2015) Thermal buckling analysis of piezoelectric functionally graded plates with temperature-dependent properties. Mech Adv Mater Struct 22(10):864–875. https://doi.org/10.1080/15376494.2013.864436CrossRef

Zhang Y, Huang H, Han Q (2015) Buckling of elastoplastic functionally graded cylindrical shells under combined compression and pressure. Compos Part B Eng 69:120–126. https://doi.org/10.1016/j.compositesb.2014.09.024CrossRef

Titel: Thermomechanical Elastic–Plastic Stability and Failure Analysis of FGM Plate
verfasst von: Kanishk Sharma
Dinesh Kumar
Verlag: Springer Singapore
Buch: Emerging Trends of Advanced Composite Materials in Structural Applications
Print ISBN: 978-981-16-1687-7

Electronic ISBN: 978-981-16-1688-4

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-981-16-1688-4_11

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten