nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

13. Three-Dimensional Fractography for Conventional and Additive Manufactured Steels After Bending-Torsion Fatigue

verfasst von : Wojciech Macek, Ricardo Branco, Jarosław Trembacz, José Domingos Costa, J. A. M. Ferreira, Carlos Capela

Erschienen in: Structural Integrity and Fatigue Failure Analysis

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, fracture surface topography parameters were measured to investigate the effects of multiaxial loading. In order to assess the metrological aspects of fracture for notched specimens made of high-strength steels processed by both conventional and additively manufacturing (AM) techniques, an optical surface profilometer was used. Three bending moment to torsion moment ratios (B/T) were studied, i.e. 2, 1 and 2/3. The geometries were solid round bars with lateral notches made of conventional steel and hollow round bars with transversal holes for AM specimens. The investigations indicate that arithmetical mean height, Sa, decreased and fractal dimension, Df, increased with higher B/T ratios and higher fatigue lives.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel FE Modelling of the Fatigue Behaviour of L-PBF Inconel 718 with As-Built Surfaces

Nächstes Kapitel Finite Element Analysis of Distortions, Residual Stresses and Residual Strains in Laser Powder Bed Fusion-Produced Components

Tisza M, Czinege I (2018) Comparative study of the application of steels and aluminium in lightweight production of automotive parts. Int J Light Mater Manuf. https://doi.org/10.1016/j.ijlmm.2018.09.001CrossRef

Macek W, Branco R, Trembacz J, Costa JD, Ferreira JA, Capela C (2020) Effect of multiaxial bending-torsion loading on fracture surface parameters in high-strength steels processed by conventional and additive manufacturing. Eng Fail Anal 118:104784. https://doi.org/10.1016/j.engfailanal.2020.104784

Aliakbari K, Nejad RM, Toroq SKP, Macek W, Branco R (2022) Assessment of unusual failure in crankshaft of heavy-duty truck engine. Eng Fail Anal 134:106085. https://doi.org/10.1016/j.engfailanal.2022.106085

Henry R, Blay T, Douillard T, Descamps-Mandine A, Zacharie-Aubrun I, Gatt J-M, Langlois C, Meille S (2019) Local fracture toughness measurements in polycrystalline cubic zirconia using micro-cantilever bending tests. Mech Mater 136:103086. https://doi.org/10.1016/J.MECHMAT.2019.103086CrossRef

Rozumek D, Marciniak Z, Lesiuk G, Correia JA, de Jesus AMP (2018) Experimental and numerical investigation of mixed mode I + II and I + III fatigue crack growth in S355J0 steel. Int J Fatigue 113:160–170. https://doi.org/10.1016/J.IJFATIGUE.2018.04.005CrossRef

Gosch A, Berer M, Hutař P, Slavik O, Vojtek T, Arbeiter FJ, Pinter G (2020) Pinter, mixed mode I/III fatigue fracture characterization of polyoxymethylene. Int J Fatigue 130:105269. https://doi.org/10.1016/J.IJFATIGUE.2019.105269

Branco R, Costa JD, Berto F, Antunes FV (2017) Effect of loading orientation on fatigue behaviour in severely notched round bars under non-zero mean stress bending-torsion. Theor Appl Fract Mech 92:185–197. https://doi.org/10.1016/J.TAFMEC.2017.07.015CrossRef

Kobayashi T, Shockey DA (2010) Fracture surface topography analysis (FRASTA)—development, accomplishments, and future applications. Eng Fract Mech 77:2370–2384. https://doi.org/10.1016/J.ENGFRACMECH.2010.05.016CrossRef

Macek W, Sampath D, Pejkowski Ł, Żak K (2022) A brief note on monotonic and fatigue fracture events investigation of thin-walled tubular austenitic steel specimens via fracture surface topography analysis (FRASTA). Eng Fail Anal 134:106048. https://doi.org/10.1016/j.engfailanal.2022.106048

10.

Cao Y, Nie W, Yu J, Tanaka K (2014) A novel method for failure analysis based on three-dimensional analysis of fracture surfaces. Eng Fail Anal 44:74–84. https://doi.org/10.1016/J.ENGFAILANAL.2014.04.032CrossRef

11.

Singh AK, Datta S, Chattopadhyay A, Riddick JC, Hall AJ (2019) Fatigue crack initiation and propagation behavior in Al—7075 alloy under in-phase bending-torsion loading. Int J Fatigue 126:346–356. https://doi.org/10.1016/J.IJFATIGUE.2019.05.024CrossRef

12.

Susmel L, Petrone N (2003) Multiaxial fatigue life estimations for 6082–T6 cylindrical specimens under in-phase and out-of-phase biaxial loadings. Eur Struct Integr Soc 31:83–104. https://doi.org/10.1016/S1566-1369(03)80006-7CrossRef

13.

Pawliczek R, Prażmowski M (2015) Study on material property changes of mild steel S355 caused by block loads with varying mean stress. Int J Fatigue. https://doi.org/10.1016/j.ijfatigue.2015.05.019

14.

Macek W, Martins RF, Branco R, Marciniak Z, Szala M, Wronski S (2022) Fatigue fracture morphology of AISI H13 steel obtained by additive manufacturing. Int J Fract 1–20. https://doi.org/10.1007/s10704-022-00615-5

15.

Fisher K, Marquis E (2016) Comparing plasma-FIB and Ga-FIB preparation of atom probe tomography samples. MicroscMicroanal. https://doi.org/10.1017/S1431927616004311

16.

Wang Z, Wu W, Qian G, Sun L, Li X, Correia JAFO (2019) In-situ SEM investigation on fatigue behaviors of additive manufactured Al-Si10-Mg alloy at elevated temperature. Eng Fract Mech 214:149–163. https://doi.org/10.1016/J.ENGFRACMECH.2019.03.040CrossRef

17.

Macek W, Rozumek D, Krolczyk GM (2020) Surface topography analysis based on fatigue fractures obtained with bending of the 2017A-T4 alloy. Measurement. 152:107347. https://doi.org/10.1016/J.MEASUREMENT.2019.107347

18.

Kida K, Ishida M, Mizobe K, Yoshida I, Tamura A, Nakane K (2017) Fatigue of low carbon alloy steel (JIS S45C) and a new method of fracture surface analysis. https://doi.org/10.4028/www.scientific.net/MSF.893.181

19.

Lauschmann H, Šiška F (2012) The reference texture: A proposal of a physical explanation. Int J Fatigue 43:120–127. https://doi.org/10.1016/J.IJFATIGUE.2012.03.002CrossRef

20.

Pomberger S, Stoschka M, Aigner R, Leitner M, Ehart R (2020) Areal fatigue strength assessment of cast aluminium surface layers. Int J Fatigue 133:105423. https://doi.org/10.1016/J.IJFATIGUE.2019.105423

21.

K. Slámečka, J. Pokluda, M. Kianicová, S. Major, I. Dvořák, Quantitative fractography of fish-eye crack formation under bending-torsion fatigue, Int. J. Fatigue. 32 (2010). doi:https://doi.org/10.1016/j.ijfatigue.2009.07.009.

22.

Sampath D, Akid R, Morana R (2018) Estimation of crack initiation stress and local fracture toughness of Ni-alloys 945X (UNS N09946) and 718 (UNS N07718) under hydrogen environment via fracture surface topography analysis. Eng Fract Mech 191:324–343. https://doi.org/10.1016/j.engfracmech.2017.12.010CrossRef

23.

Macek W (2021) Fracture surface formation of notched 2017A-T4 aluminium alloy under bending fatigue. Int J Fract 1–17. https://doi.org/10.1007/s10704-021-00579-y

24.

Macek W, Branco R, Korpyś M, Łagoda T (2021) Fractal dimension for bending–torsion fatigue fracture characterisation. Measurement 184:109910. https://doi.org/10.1016/j.measurement.2021.109910

25.

Macek W, Branco R, Costa JD, Pereira C (2021) Strain sequence effect on fatigue life and fracture surface topography of 7075-T651 aluminium alloy. Mech Mater 160:103972. https://doi.org/10.1016/j.mechmat.2021.103972

26.

Branco R, Costa JDM, Berto F, Razavi SMJ, Ferreira JAM, Capela C, Santos L, Antunes F (2018) Low-cycle fatigue behaviour of AISI 18Ni300 maraging steel produced by selective laser melting. Metals (Basel). https://doi.org/10.3390/met8010032

27.

Branco R, Costa JDM, Antunes FV, Perdigão S (2016) Monotonic and cyclic behavior of DIN 34CrNiMo6 tempered alloy steel. Metals (Basel). https://doi.org/10.3390/met6050098

28.

Macek W (2021) Correlation between fractal dimension and areal surface parameters for fracture analysis after bending-torsion fatigue. Metals 11:1790. https://doi.org/10.3390/met11111790

29.

Podulka P (2022) Selection of methods of surface texture characterisation for reduction of the frequency-based errors in the measurement and data analysis processes. Sensors 22:791. https://doi.org/10.3390/s22030791

30.

International Organisation of Standardization. ISO 25178, Geom. Prod. Specif.—Surf. Texture Areal (2010)

31.

Molent L, Spagnoli A, Carpinteri A, Jones R (2017) Using the lead crack concept and fractal geometry for fatigue lifing of metallic structural components. Int J Fatigue 102:214–220. https://doi.org/10.1016/J.IJFATIGUE.2017.04.001CrossRef

32.

Todhunter LD, Leach RK, Lawes SDA, Blateyron F (2017) Industrial survey of ISO surface texture parameters. CIRP J Manuf Sci Technol 19:84–92. https://doi.org/10.1016/J.CIRPJ.2017.06.001CrossRef

Titel: Three-Dimensional Fractography for Conventional and Additive Manufactured Steels After Bending-Torsion Fatigue
verfasst von: Wojciech Macek
Ricardo Branco
Jarosław Trembacz
José Domingos Costa
J. A. M. Ferreira
Carlos Capela
Verlag: Springer International Publishing
Buch: Structural Integrity and Fatigue Failure Analysis
Print ISBN: 978-3-030-91846-0

Electronic ISBN: 978-3-030-91847-7

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-3-030-91847-7_13

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten