nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

To the Question of the Synthesis of Modifications Bennett’s Mechanism

verfasst von : Fanil F. Khabibullin, Ildar H. Saitov, Ilyas Z. Bagautdinov

Erschienen in: Advances in Mechanical Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The dependences of the values of angular velocities and angular accelerations of the driven crank on the leading crank are investigated. The methods of synthesis of modifications of Bennett’s mechanism according to the degree of non-uniformity of rotation of the driven crank, according to the positions of the driving and driven units are considered. Formulas are obtained that allow tracing the influence of the geometric parameters of the links of the mechanism on the kinematics of the cranks. The calculation results are displayed in the form of graphs.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Analysis of the Self-braking Effect of Linkage Mechanisms

Nächstes Kapitel Test Centrifuge Arrangement Analysis

Yarullin MG, Khabibullin FF (2017) Theoretical and practical conditions of Bennett mechanism workability. Lect Notes Mech Eng, 145–153

Borodin VM, Lustin AD, Khairov LS, Shcherbakov AV (2017) The six-link mechanism as a topological phenomenon of Mobius symmetry. In: Proceedings of Akademenergo, № 3, pp 79–87 (in Russian)

Lee CC, Herve JM (2014) Oblique circular torus, Villarceau circles, and four types of Bennett linkages. Proc IMechE, Part C J Mech Eng Sci. 228(4):742–752

Yarullin MG, Isyanov IR (2018) Structural study of a two-mobility five-link space mechanism with a double crank. Lect Notes Mech Eng 2018, PartF5, pp 187–194

Yarullin MG, Faizov MR (2018) Synthesis of spherical four-links rotational pairs in the solidworks program. Lect Notes Mech Eng 2018, PartF5, pp 177–185

Husty M, Pfurner M, Schrocker H-P, Brunnthaler K (2007) Algebraic methods in the analysis and synthesis. Robotica. Cambridge University Press, Cambridge, pp 661–675

Yarullin MG, Khabibullin FF (2017) Geometry of the kinematic chain and links of the Bennett mechanism. In: Modern mechanical engineering: science and education: Materials of the 6th International scientific-practical. conference. Ed. A.N. Evgrafova and A.A. Popovich. - SPb .: Publishing house of Polytechnic. Univ., pp 262–274 (in Russian)

Sakhapov RL, Nikolaeva RV, Gatiyatullin MH, Makhmutov MM (2017) Mathematical model of highways network optimization. J Phys Conf Ser 936(1):012032. https://doi.org/10.1088/1742-6596/936/1/012032

Fen H, Kang R, Chen Y (2016) Workspace analysis of a reconfigurable mechanism generated from the network of Bennett linkages. Mech Mach Sci 36:153–163CrossRef

10.

Gabsattarov RM, Konoplev YG, Sachenkov OA, Egorov SV, Lustin AD (2015) Defining relations of vibrations of vehicle suspension with the mass and rigidity design deviations. Int J Appl Eng Res 10(24):44629–44635

11.

Ding H, Cao W, Chen Z (2015) Structural synthesis of two-layer and two-loop spatial mechanisms with coupling chains. Mech Mach Theor 92:289–313CrossRef

12.

Evgrafov AN, Petrov GN (2018) Self-braking of planar linkage mechanisms. Lecture Notes in Mechanical Engineering PartF5, pp 83–92

13.

Sakhapov RL, Nikolaeva RV, Gatiyatullin MH, Makhmutov MM (2016) Modeling the dynamics of the chassis of construction machines. J Phys: Conf Ser 738(1):012119. https://doi.org/10.1088/1742-6596/738/1/012119CrossRef

14.

Guo H, Song X, Li L, Deng Z, Liu R, Geng J (2018) Type synthesis of deployable single-loop overconstrained linkages based on Bennett linkages. Mech Mach Theor 120:1–29CrossRef

15.

Evgrafov AN, Petrov GN (2017) Computer simulation of mechanisms. Lecture Notes in Mechanical Engineering, pp 45–56

16.

Roshchin VV, Yerakhmadov SN (2017) Method for calculating the thermal conditions of gas cylinders heated from the outside GTD. Bulletin of the Kazan State Technical University. A.N. Tupolev. vol 73, no 2, pp 102–106 (in Russian)

17.

Qu H, Fang Y, Guo S (2013) Bennett motion analysis based on specific regulus. Int J Mech Rob Syst 1(2/3):170–184CrossRef

Titel: To the Question of the Synthesis of Modifications Bennett’s Mechanism
verfasst von: Fanil F. Khabibullin
Ildar H. Saitov
Ilyas Z. Bagautdinov
Verlag: Springer International Publishing
Buch: Advances in Mechanical Engineering
Print ISBN: 978-3-030-11980-5

Electronic ISBN: 978-3-030-11981-2

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-030-11981-2_12

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht