nach oben

Tribology Letters

Erschienen in:

01.09.2021 | Original Paper

Transitions of Wear Characteristics for Rubber/Steel Seal Pairs During the Abrasive Wear Process

verfasst von: Qin Zhou, Shuaishuai Li, Kai Zhang, Kun Qin, Minghao Lv, Weihao Sun, Tongxin Yuan

Erschienen in: Tribology Letters | Ausgabe 3/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Abrasive wear resulting from the microclastic rock is a common failure phenomenon in the drilling environment that often limits the sealing ability and the service life of seals. In this study, the friction and wear process of fluoro rubber (FKM) seals against 304 stainless steel (SS304) after one single entry of SiO₂ abrasives were investigated. The influence of the changes in particle state on friction coefficient evolution, wear loss evolution, wear morphologies, and wear mechanisms were discussed in detail. The results indicate that the presence of abrasive particles dispersed between the sealing interfaces clearly improves the friction performance of the seal pairs and deteriorates the wear performance of the metal counterpart. The movement and breakage of particles after one single entering into the sealing interface were obtained. And on this basis, the stable wear process can be divided into three stages. In addition, the main causes contributed to this change of wear mechanisms are the random movement and process of continuous breakdown of abrasive particles. Furthermore, the transition of the wear mechanism that clearly describes the wearing behavior of the seal pairs under these abrasive wear conditions was identified. The results of this study enhanced our understanding of the abrasive wear degradation of rubber seal in practical drilling applications.

Vorheriger Artikel Soft EHL-Based Friction Mechanism of Unreinforced and GF-Reinforced PA66 in Contact with Steel Under PAO8 Oil Lubrication

Nächster Artikel Effects of Environmental Moisture and Functional Groups on the Sliding Adhesive Behaviour of Graphene Steps

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

He, Q., Xu, Z., Li, A., Wang, J., Zhang, J., Zhang, Y.: Study on hydrophobic properties of fluororubber prepared by template method under high temperature conditions. Colloids Surfaces A: Physicochem. Eng. Aspects. 612, 125837 (2021). https://doi.org/10.1016/j.colsurfa.2020.125837CrossRef

Hiltz, J.A.: Characterization of fluoroelastomers by various analytical techniques including pyrolysis gas chromatography/mass spectrometry. J. Anal. Appl. Pyrolysis. 109, 283–295 (2014). https://doi.org/10.1016/j.jaap.2013.06.008CrossRef

Shen, M., Li, B., Ji, D., Xiong, G., Zhao, L., Zhang, J., Zhang, Z.: Effect of particle size on tribological properties of rubber/steel seal pairs under contaminated water lubrication conditions. Tribol. Lett. 68, 40 (2020). https://doi.org/10.1007/s11249-020-1285-1CrossRef

Shen, M.-X., Dong, F., Zhang, Z.-X., Meng, X.-K., Peng, X.-D.: Effect of abrasive size on friction and wear characteristics of nitrile butadiene rubber (NBR) in two-body abrasion. Tribol. Int. 103, 1–11 (2016). https://doi.org/10.1016/j.triboint.2016.06.025CrossRef

Sui, P.C., Anderle, S.: Optimization of contact pressure profile for performance improvement of a rotary elastomeric seal operating in abrasive drilling environment. Wear 271, 2466–2470 (2011). https://doi.org/10.1016/j.wear.2011.02.021CrossRef

Feng, D., Shen, M., Peng, X., Meng, X.: Surface roughness effect on the friction and wear behaviour of acrylonitrile-butadiene rubber (NBR) under oil lubrication. Tribol. Lett. 65, 10 (2016). https://doi.org/10.1007/s11249-016-0793-5CrossRef

Gheisari, R., Bashandeh, K., Polycarpou, A.A.: Effect of surface polishing on the tribological performance of hard coatings under lubricated three-body abrasive conditions. Surf. Topogr. Metrol. Prop. 7, 45001 (2019). https://doi.org/10.1088/2051-672x/ab40ffCrossRef

Trezona, R.I., Allsopp, D.N., Hutchings, I.M.: Transitions between two-body and three-body abrasive wear: influence of test conditions in the microscale abrasive wear test. Wear (1999). https://doi.org/10.1016/S0043-1648(98)00358-5CrossRef

Stack, M.M., Mathew, M.: Micro-abrasion transitions of metallic materials. Wear. 255, 14–22 (2003). https://doi.org/10.1016/S0043-1648(03)00204-7CrossRef

10.

Sebastiani, M., Mangione, V., De Felicis, D., Bemporad, E., Carassiti, F.: Wear mechanisms and in-service surface modifications of a Stellite 6B Co–Cr alloy. Wear. (2012). https://doi.org/10.1016/j.wear.2012.05.027CrossRef

11.

Allsopp, D.N., Trezona, R.I., Hutchings, I.M.: The effects of ball surface condition in the micro-scale abrasive wear test. Tribol. Lett. 5, 259–264 (1998). https://doi.org/10.1023/A:1019178716408CrossRef

12.

Allsopp, D.N., Hutchings, I.M.: Micro-scale abrasion and scratch response of PVD coatings at elevated temperatures. Wear. 251, 1308–1314 (2001). https://doi.org/10.1016/S0043-1648(01)00755-4CrossRef

13.

Adachi, K., Hutchings, I.M.: Wear-mode mapping for the micro-scale abrasion test. Wear. 255, 23–29 (2003). https://doi.org/10.1016/S0043-1648(03)00073-5CrossRef

14.

Qin, K., Zhou, Q., Zhang, K., Feng, Y., Zhang, T., Zheng, G.J., Xia, B., Liu, B.: Non-uniform abrasive particle size effects on friction characteristics of FKM O-ring seals under three-body abrasion. Tribol. Int. 136, 216–223 (2019). https://doi.org/10.1016/j.triboint.2019.03.051CrossRef

15.

Nahvi, S.M., Shipway, P.H., McCartney, D.G.: Particle motion and modes of wear in the dry sand–rubber wheel abrasion test. Wear. 267, 2083–2091 (2009). https://doi.org/10.1016/j.wear.2009.08.013CrossRef

16.

Thakare, M.R., Wharton, J.A., Wood, R.J.K., Menger, C.: Effect of abrasive particle size and the influence of microstructure on the wear mechanisms in wear-resistant materials. Wear. 276–277, 16–28 (2012). https://doi.org/10.1016/j.wear.2011.11.008CrossRef

17.

Harsha, A.P., Tewari, U.S.: Two-body and three-body abrasive wear behaviour of polyaryletherketone composites. Polym. Test. 22, 403–418 (2003). https://doi.org/10.1016/S0142-9418(02)00121-6CrossRef

18.

Kumar, S., Harsha, A.P., Goyal, H.S., Hussain, A.A., Wesley, S.B.: Three-body abrasive wear behaviour of aluminium alloys. Proceed. Instit. Mech. Eng. Part J: J. Eng. Tribol. 227, 328–338 (2012). https://doi.org/10.1177/1350650112463305CrossRef

19.

Wirojanupatump, S., Shipway, P.H.: Abrasion of mild steel in wet and dry conditions with the rubber and steel wheel abrasion apparatus. Wear. 239, 91–101 (2000). https://doi.org/10.1016/S0043-1648(00)00310-0CrossRef

20.

Zhang, S.W.: Advances in studies on rubber abrasion. Tribol. Int. 22, 143–148 (1989). https://doi.org/10.1016/0301-679X(89)90175-8CrossRef

21.

Zhang, S.W.: Wet abrasion of polymers. Wear. 158, 1–13 (1992). https://doi.org/10.1016/0043-1648(92)90026-5CrossRef

22.

Lv, X.R., Huo, X.Y., Qu, G.Z., Wang, S.J.: Research on friction and wear behavior of rubber in the mixture of crude oil with water. Appl. Mech. Mater. 300–301, 1254–1258 (2013). https://doi.org/10.4028/www.scientific.net/AMM.300-301.1254CrossRef

23.

Zhang, Y.Z., Yan, M.Y., Wang, S.J., Lv, X.R.: The Research on the friction and wear behavior of FKM/nbr blends under water lubrication. Adv. Mater. Res. 750–752, 2150–2155 (2013). https://doi.org/10.4028/www.scientific.net/AMR.750-752.2150CrossRef

24.

Flitney, B.: Positive lubrication rotary seals for down-hole/ abrasive applications. Seal. Technol. 2005, 8–11 (2005). https://doi.org/10.1016/S1350-4789(05)70831-XCrossRef

25.

Ren, Y., Wang, N., Jiang, J., Zhu, J., Song, G., Chen, X.: The application of downhole vibration factor in drilling tool reliability big data analytics—a review. ASCE-ASME J Risk Uncert Engrg Sys. Part B Mech. Engrg. (2018). https://doi.org/10.1115/1.4040407CrossRef

26.

Buck, G.S.: The role of hydraulic balance in mechanical pump seals. Texas A&M University, Gas Turbine Laboratories (1978). https://doi.org/10.21423/R1F671

27.

Yang, J., Liu, Z., Cheng, Q., Liu, X., Deng, T.: The effect of wear on the frictional vibration suppression of water-lubricated rubber slat with/without surface texture. Wear. 426–427, 1304–1317 (2019). https://doi.org/10.1016/j.wear.2018.12.079CrossRef

28.

Gawliński, M.: Friction and wear of elastomer seals. Arch. Civil Mech. Eng. 7, 57–67 (2007). https://doi.org/10.1016/S1644-9665(12)60225-8CrossRef

29.

Shen, M., Zheng, J., Meng, X., Li, X., Peng, X.: Influence of Al2O3 particles on the friction and wear behaviors of nitrile rubber against 316L stainless steel. J. Zhejiang Univ-Sci. A. 16, 151–160 (2015). https://doi.org/10.1631/jzus.A1400217CrossRef

30.

Gates, J.D.: Two-body and three-body abrasion: a critical discussion. Wear 214, 139–146 (1998). https://doi.org/10.1016/S0043-1648(97)00188-9CrossRef

31.

Dwyer-Joyce, R.S., Sayles, R.S., Ioannides, E.: An investigation into the mechanisms of closed three-body abrasive wear. Wear 175, 133–142 (1994). https://doi.org/10.1016/0043-1648(94)90176-7CrossRef

32.

Totten, G.E., Batchelor, A.W., Liang, H., Lim, C.Y.H., Scharf, T.W., Van Der Heide, E., Nolan, A., Lampman, S., Haws, W., Kubel, E., Lampman, H., Ryan, L., Leyda, J.H., Marquard, E., Sanders, B.: ASM handbook w volume 18 friction, lubrication, and wear technology volume editor division editors asm international staff editorial assistance. ASM Handbook. 18, 21 (2017)

33.

Thomine, M., Degrange, J.-M., Vigier, G., Chazeau, L., Pelletier, J.-M., Kapsa, P., Guerbé, L., Dudragne, G.: Study of relations between viscoelasticity and tribological behaviour of filled elastomer for lip seal application. Tribol. Int. 40, 405–411 (2007). https://doi.org/10.1016/j.triboint.2005.09.033CrossRef

34.

Zhang, K., Wang, D., Wang, Z., Guo, Y.: Material properties and tool performance of PCD reinforced WC matrix composites for hardbanding applications. Int. J. Refract Metal Hard Mater. 51, 146–152 (2015). https://doi.org/10.1016/j.ijrmhm.2015.03.011CrossRef

35.

Zhang, K., Wang, Z., Wang, D., Guo, Y., Zhao, B.: Dry sliding friction and casing wear behavior of PCD reinforced WC matrix composites. Tribol. Int. 90, 84–95 (2015). https://doi.org/10.1016/j.triboint.2015.04.028CrossRef

36.

Liang, H., Fukahori, Y., Thomas, A.G., Busfield, J.J.C.: Rubber abrasion at steady state. Wear 266, 288–296 (2009). https://doi.org/10.1016/j.wear.2008.07.006CrossRef

37.

Schallamach, A.: How does rubber slide. Wear 17, 301–312 (1971). https://doi.org/10.1016/0043-1648(71)90033-0CrossRef

38.

Zhang, S.W.: Tribology of elastomers. Elsevier, Amsterdam (2004)

Titel: Transitions of Wear Characteristics for Rubber/Steel Seal Pairs During the Abrasive Wear Process
verfasst von: Qin Zhou
Shuaishuai Li
Kai Zhang
Kun Qin
Minghao Lv
Weihao Sun
Tongxin Yuan
Publikationsdatum: 01.09.2021
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 3/2021
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-021-01480-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2021

Structurally Driven Environmental Degradation of Friction in MoS2 Films

Tailorable and Repeatable Normal Contact Stiffness via Micropatterned Interfaces

Corrections to: Atomic Origins of Friction Reduction in Metal Alloys

On Opening Crack Propagation in Viscoelastic Solids

Probing the Rheological Properties of Liquids Under Conditions of Elastohydrodynamic Lubrication Using Simulations and Machine Learning

Friction and Wear Behaviors of Steel Ball Against Polyimide-PTFE Composite Under Rolling-Sliding Motion

Premium Partner

Marktübersichten