nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Tribomechanical Behaviour of Non-oxide Ceramic Matrix Composites in Dry Sliding

verfasst von : Subhrojyoti Mazumder, Hendrik Simon Cornelis Metselaar, Nazatul Liana Sukiman, Nurin Wahidah Mohd Zulkifli

Erschienen in: Tribological Applications of Composite Materials

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Non-oxide ceramics have been widely used in many tribological applications under a wide range of operating conditions over many decades. Nevertheless, a comprehensive review of tribomechanical characteristics of such potential ceramics relating to modern trends is not articulated anywhere before. Therefore, this chapter reviews studies regarding the tribological and mechanical performance of non-oxide based ceramic matrix composites (CMCs) carried out by various researchers. This work concerns only the tribological investigation of the ceramic composite in dry sliding/erosive condition and hence the characteristics under liquid lubricant or any other liquid medium is beyond the scope of this writing. Widely used boride, carbide and nitride based ceramics are considered as the matrix phase for these ceramic composites. The tribological and mechanical effects of reinforcements and dopants, such as hard or soft nano-micro particles (SiC, ZrC, B₄C, WC, hBN, graphene etc.), nanowire/nanotube/fibre (SiC/CNTs/C_f etc.) and some rare earth compounds (Sm₂O₃, Y₂O₃, La₂O₃, Nd₂O₃, Yb₂O₃, Lu₂O₃ etc.) into the non-oxide based ceramic composites are described under sliding conditions from room temperature to elevated temperature. In addition to this, the key applications of such composites in a wide range of operating conditions are discussed. This chapter also highlights the advantages and disadvantages of this class of ceramic matrix composites.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Tribological Properties of Composite Materials for Automotive Applications

Adibpur F, Tayebifard SA, Zakeri M, Asl MS (2020) Spark plasma sintering of quadruplet ZrB₂–SiC–ZrC–Cf composites. Ceram Int 46(1):156–164CrossRef

Aouadi SM, Paudel Y, Luster B, Stadler S, Kohli P, Muratore C, Hager C, Voevodin AA (2008) Adaptive Mo₂N/MoS₂/Ag tribological nanocomposite coatings for aerospace applications. Tribol Lett 29:95–103CrossRef

Aydinyan S, Minasyan T, Liu L, Cygan S, Hussainova I (2019) ZrC based ceramics by high pressure high temperature SPS technique. Key Eng Mater 799:125–130CrossRef

Balázsi C, Wéber F, Kövér Z, Shen Z, Kónya Z, Kasztovszky Z, Vértesy Z, Biró LP, Kiricsi I, Arato P (2006) Application of carbon nanotubes to silicon nitride matrix reinforcements. Curr Appl Phys 6:124–130

Bellosi A, Portu GD (1989) Hot-pressed Si₃N₄-SiC whisker composites. Mater Sci Eng A 109:357–362CrossRef

Benamor A, Kota S, Chiker N, Haddad A, Hadji Y, Natu V, Abdi S, Yahi M, Benamar MEA, Sahraoui T, Hadji M, Barsoum MW (2019) Friction and wear properties of MoAlB against Al₂O₃ and 100Cr6 steel counterparts. J Eur Ceram Soc 39:868–877CrossRef

Berkes MM, Németh AK, Károly Z, Bódis E, Maros Z, Tapasztó O, Balázsi K (2016) Tribological characterisation of silicon nitride/multilayer graphene nano composites produced by HIP and SPS technology. Tribol Int 93:269–281CrossRef

Bertagnoli D, López OB, Rojas FR, Guiberteau F, Ortiz AL (2015) Effect of processing conditions on the sliding-wear resistance of ZrC triboceramics fabricated by spark-plasma sintering. Ceram Int 41:15278–15282CrossRef

Bian G, Wu H (2015) Friction performance of carbon/silicon carbide ceramic composite brakes in ambient air and water spray environment. Tribol Int 92:1–11CrossRef

Bian G, Wu H (2016) Friction surface structure of a Cf/C–SiC composite brake disc after bedding testing on a full-scale dynamometer. Tribol Int 99:85–95CrossRef

Blugan G, Hadad M, Graule T, Kuebler J (2014) Si₃N₄–TiN–SiC three particle phase composites for wear applications. Ceram Int 40:1439–1446CrossRef

Brown M (1995) Seals and sealing handbook. Elsevier, Amsterdam

Carrapichano JM, Gomes JR, Oliveira FJ, Silva RF (2003) Si₃N₄ and Si₃N₄/SiC composite rings for dynamic sealing of circulating fluids. Wear 255:695–698CrossRef

Chakraborty S, Debnath D, Mallick AR, Das PK (2014) Mechanical, tribological, and thermal properties of hot-pressed ZrB₂-B₄C composite. Int J Appl Ceram Technol 1–9

Chakraborty S, Mallick AR, Debnath D, Das PK (2015) Densification, mechanical and tribological properties of ZrB₂ by SPS: effect of pulsed current. Int J Refract Metal Hard Mater 48:150–156CrossRef

Chen W, Gao Y, Chen C, Xing J (2010) Tribological characteristics of Si₃N₄–hBN ceramic materials sliding against stainless steel without lubrication. Wear 269:241–248CrossRef

Chen W, Zhang D, Ai X (2017) Effect of load on the friction and wear characteristics of Si₃N₄-hBN ceramic composites sliding against steels. Ceram Int 43:4379–4389CrossRef

Chen W, Wang Z, Liu X, Jia J, Hu Y (2020) Effect of load on the friction and wear characteristics of Si₃N₄-hBN ceramic composites sliding against PEEK in artificial seawater. Tribol Int 141:105902CrossRef

Cundill RT (1992) High-precision silicon nitride balls for bearings. In: Baker LR (ed) Commercial applications of precision manufacturing at the sub-micron level. SPIE–The International Society for Optical Engineering, London, pp 75–87

Džunda R, Fides M, Hnatko M, Hvizdoš P, Múdra E, Medveď D, Kovalčíková A, Milkovič O (2019) Mechanical, physical properties and tribological behaviour of silicon carbide composites with addition of carbon nanotubes. Int J Refract Metal Hard Mater 81:272–280CrossRef

Gal CW, Song GW, Baek WH, Kim HK, Lee DK, Lim KW, Park SJ (2019) Fabrication of pressureless sintered Si₃N₄ ceramic balls by powder injection molding. Ceram Int 45:6418–6424CrossRef

Gee MG, Matharu CS, Almond EA, Eyre TS (1990) The measurement of sliding friction and wear of ceramics at high temperature. Wear 138(1–2):169–187CrossRef

González BN, Ortiz AL, Guiberteau F, Padture NP (2011) Effect of MoSi₂ content on the lubricated sliding-wear resistance of ZrC–MoSi₂ composites. J Eur Ceram Soc 31:877–882CrossRef

Guo XL, Zhu ZL, Ekevad M, Bao X, Cao PX (2017) The cutting performance of Al₂O₃ and Si₃N₄ ceramic cutting tools in the milling plywood. Adv Appl Ceram 117:1–7

Hasan M, Zhao J, Jiang Z (2019) Micromanufacturing of composite materials: a review. Int J Extreme Manuf 1:012004CrossRef

Jiang G, Yang J, Xu Y, Gao J, Zhang J, Zhang L, Cheng L, Lou J (2008) Effect of graphitization on microstructure and tribological properties of C/SiC composites prepared by reactive melt infiltration. Compos Sci Technol 68:2468–2473CrossRef

Jones AH, Dobedoe RS, Lewis MH (2001) Mechanical properties and tribology of Si₃N₄–TiB₂ ceramic composites produced by hot pressing and hot isostatic pressing. J Eur Ceram Soc 21(7):969–980CrossRef

Jourdain V, Bichara C (2013) Current understanding of the growth of carbon nanotubes in catalytic chemical vapour deposition. Carbon 58:2–39CrossRef

Ju HB, Yu D, Yu LH, Ding N, Xu JH, Zhang XD, Zheng Y, Yang L, He X (2018) The influence of Ag contents on the microstructure, mechanical and tribological properties of ZrN-Ag films. Vacuum 148:54–61CrossRef

Kim YW, Chun YS, Nishimura T, Mitomo M, Lee YH (2007) High-temperature strength of silicon carbide ceramics sintered with rare-earth oxide and aluminum nitride. Acta Mater 55:727–736CrossRef

Kimura Y, Wakabayashi T, Okada K, Wada T, Nishikawa H (1999) Boron nitride as a lubricant additive. Wear 232:199–206CrossRef

Klemm H (2010) Silicon nitride for high-temperature applications. J Am Ceram Soc 93(6):1501–1522CrossRef

Kong L, Bi Q, Zhu S, Yang J, Liu W (2012) Tribological properties of ZrO₂ (Y₂O₃) MoBaF₂/CaF₂ composites at high temperatures. Tribol Int 45:43–49CrossRef

Köstenbauer H, Fontalvo GA, Mitterer C, Keckes J (2008) Tribological properties of TiN/Ag nanocomposite coatings. Tribol Lett 30:53–60CrossRef

Li X, Ding H, Huang Z, Fang M, Liu B, Liu Y, Wu X, Chen S (2014) Solid particle erosion-wear behavior of SiC–Si₃N₄ composite ceramic at elevated temperature. Ceram Int 40:16201–16207CrossRef

Llorente J, Manso BR, Miranzo P, Belmonte M (2016) Tribological performance under dry sliding conditions of graphene/silicon carbide composites. J Eur Ceram Soc 36:429–435CrossRef

Manzoor S, Wani MF, Saleem SS (2019) Effect of load on the friction and wear behaviour of silicon nitride and silicon nitride titanium carbide ceramic composite. Mater Today Proc 19(2):474–477CrossRef

Mazumder S, Barad BB, Show BK, Mandal N (2019a) Tribological property enhancement of 3Y-TZP ceramic by the combined effect of CaF₂ and MgO phases. Ceram Int 45:13447–13455CrossRef

Mazumder S, Kumar OP, Kotnees DK, Mandal N (2019b) Tribological influences of CuO into 3Y-TZP ceramic composite in conformal contact. J Tribol 141(3):031606CrossRef

Mazumder S, Kumar A, Singh BK, Roy H, Mandal N (2019c) Tribological investigation of MgO/Al₂O₃ ceramic composite with the inclusion of nano CuO in dry abrasive wear test. Mater Res Express 6:085086CrossRef

Medveď D, Balko J, Sedlák R, Kovalčíková A, Shepa I, Duszová AN, Bączek E, Podsiadło M, Dusza J (2019) Wear resistance of ZrB₂ based ceramic composites. Int J Refract Metal Hard Mater 81:214–224CrossRef

Moazami GM, Nemati A (2018) Tribological behavior of self lubricating Cu/MoS₂ composites fabricated by powder metallurgy. Trans Nonferrous Met Soc China 28:946–956. https://doi.org/10.1016/S1003-6326(18)64729-6CrossRef

Moshtaghioun BM, Garcia DG, Rodriguez AD, Todd RI (2016) Abrasive wear rate of boron carbide ceramics: influence of microstructural and mechanical aspects on their tribological response. J Eur Ceram Soc 36:3925–3928CrossRef

Murthy TSRC, Basu B, Srivastava A, Balasubramaniam R, Suri AK (2006) Tribological properties of TiB₂ and TiB₂–MoSi₂ ceramic composites. J Eur Ceram Soc 26:1293–1300CrossRef

Natu V, Kota SS, Barsoum MW (2020) X-ray photoelectron spectroscopy of the MAB phases, MoAlB, M₂AlB₂ (M = Cr, Fe), Cr₃AlB₄ and their binary monoborides. J Eur Ceram Soc 40:305–314CrossRef

Novak S, Drazic G, Samardzija Z, Kalin M, Vizintin J (1996) Wear of silicon nitride ceramics under fretting conditions. Mater Sci Eng A 215:125–133CrossRef

Pan W, Gao Y (2018) Tribological behavior of B₄C/hBN ceramic composites coupled with grey iron under the lubrication of emulsion. Mater Res Express 5:066512CrossRef

Park DS, Danyluk S, McNallan M (1992) Influence of tribochemical reaction products on friction and wear of silicon nitride at elevated temperatures in reactive environments. Am Ceram Soc 75(11):3033–3039CrossRef

Qian Y, Zhang W, Ge M, Wei X (2013) Frictional response of a novel C/C–ZrB₂–ZrC–SiC composite under simulated braking. J Adv Ceram 2(2):157–161CrossRef

Riley FL (2000) Silicon nitride and related materials. J Am Ceram Soc 83:245–265CrossRef

Rosado L, Forster NH, Trivedi HK, King JP (2000) Solid lubrication of silicon nitride with cesium-based compounds: part I—rolling contact endurance, friction and wear. Tribol Trans 43:489–497CrossRef

Saito T, Hosoe T, Honda F (2001) Chemical wear of sintered Si₃N₄, hBN and Si₃N₄–hBN composites by water lubrication. Wear 247:223–230CrossRef

Sarkar D, Kumar BVM, Basu B (2006) Understanding the fretting wear of Ti₃SiC₂. J Eur Ceram Soc 26(13):2441–2452CrossRef

Sedlák R, Kovalčíková A, Balko J, Rutkowski P, Dubiel A, Zientara D, Girman V, Múdra E, Dusza J (2017) Effect of graphene platelets on tribological properties of boron carbide ceramic composites. Int J Refract Metal Hard Mater 65:57–63CrossRef

Shaffer PTB (1969) Engineering properties of carbides. In Schneider SJ Jr (ed) Ceramics and glasses: engineered materials handbook, vol 4. ASM International, Ohio, pp 804–811

Sharma SK, Kumar BVM, Kim YW (2015) Effect of WC addition on sliding wear behavior of SiC ceramics. Ceram Int 41:3427–3437CrossRef

Sharma SK, Kumar BVM, Kim YW (2016) Tribological behavior of silicon carbide ceramics—a review. J Korean Ceram Soc 53(6):581–596CrossRef

Sharma SK, Kumar BVM, Zugelj BB, Kalin M, Kim YW (2017) Room and high temperature reciprocated sliding wear behavior of SiC-WC composites. Ceram Int 43:16827–16834CrossRef

Sharma SK, Kumar BVM, Kim YW (2019) Tribology of WC reinforced SiC ceramics: influence of counterbody. Friction 7(2):129–142CrossRef

Skopp A, Woydt M, Habig KH (1990) Unlubricated sliding friction and wear of various Si3N4-pairs between 22 °C and 1000 °C. Tribol Int 23(3):189–199CrossRef

Skopp A, Woydt M, Habig KH (1995) Tribological behavior of silicon nitride matrials under unlubricated sliding between 22 °C materials under and 1000 °C. Wear 181–183:571–580

Sonber JK, Limaye PK, Murthy TSRC, Sairam K, Nagaraj A, Soni NL, Patel RJ, Chakravartty JK (2015) Tribological properties of boron carbide in sliding against WC ball. Int J Refract Metal Hard Mater 51:110–117CrossRef

Sun J, Liu C, Tian J, Feng B (2012) Erosion behavior of B₄C based ceramic nozzles by abrasive air-jet. Ceram Int 38:6599–6605CrossRef

Suszko T, Gulbinski W, Jagielski J (2006) Mo₂N/Cu thin films—the structure, mechanical and tribological properties. Surf Coat Technol 200:6288–6292CrossRef

Tang H, Zeng X, Xiong X, Li L, Zou J (2009) Mechanical and tribological properties of short-fiber-reinforced SiC composites. Tribol Int 42:823–827CrossRef

Tatarko P, Kasiarová M, Dusza J, Morgiel J, Sajgalík P, Hvizdos P (2010) Wear resistance of hot-pressed Si₃N₄/SiC micro/nanocomposites sintered with rare-earth oxide additives. Wear 269:867–874CrossRef

Tatarko P, Kasiarova M, Chlup Z, Dusza J, Sajgalik P, Vavra I (2013) Influence of rare-earth oxide additives and SiC nanoparticles on the wear behaviour of Si₃N₄-based composites at temperatures upto 900 °C. Wear 300:155–162CrossRef

Telle R, Petzow G (1988) Strengthening and toughening of boride and carbide hard material composites. Mater Sci Eng A 105–106:97–104CrossRef

Tjong SC, Lau KC (2000) Abrasion resistance of stainless-steel composites reinforced with hard TiB₂ particles. J Compos Sci Technol 60(8):1141CrossRef

Tomizawa H, Fischer TE (1986) Friction and wear of silicon nitride at 150 °C to 800 °C. ASLE Truns 29(4):481–1187CrossRef

Torres H, Rodríguez RM, Prakash B (2018) Tribological behaviour of self-lubricating materials at high temperatures. Int Mater Rev 63:309–340CrossRef

Vleugels J, Kumar KCH, Vitchev RG, Biest OVD, Basu B (2002) Unlubricated fretting wear of TiB₂ containing composites against bearing steel. Metall Mater Trans A 33(12):3847–3859CrossRef

Wang BQ, Levy AV (1990) Erosion behavior of SiC fiber-SiC matrix composites. Wear 138:125–136CrossRef

Wang L, Snidle RW, Gu L (2000) Rolling contact silicon nitride bearing technology: a review of recent research. Wear 246:159–173CrossRef

Wanga B, Shangguana D, Qiaoa R, Zhanga F, Baia Y, Wanga Z, Wanga C, Lu X (2019) Fabrication, mechanical properties and thermal shock resistance of a dense SiC NWs/α-Si₃N₄ composite coating for protecting porous Si₃N₄ ceramics. Ceram Int 45:23241–23247CrossRef

Woetting G, Caspers B, Gugel E, Westerheide R (2000) High-temperature properties of SiC-Si₃N₄ particle composites. J Eng Gas Turbines Power 122(1):8–12CrossRef

Xin H, Shi H, Chen W, Jia J, Yang W, Jin Z (2019) Tribological investigation of Si₃N₄-hBN on HXLPE bearing couple: effects of sliding velocity and contact load. Ceram Int 45:6296–6302CrossRef

Xue P, Meng Q, Chen S, Liang L, Liu Z, Chen R (2011) Tribological property of (TiC-TiB₂)pNi ceramics prepared by field-activated and pressure-assisted synthesis. Rare Met 30:599CrossRef

Yang F, Zhang X, Han J, Du S (2008) Mechanical properties of short carbon fiber reinforced ZrB₂–SiC ceramic matrix composites. Mater Lett 62:2925–2927CrossRef

Yang J, Gu W, Pan LM, Song K, Chen X, Qiu T (2011) Friction and wear properties of in situ (TiB₂ + TiC)/Ti₃SiC₂ composites. Wear 271:2940–2946CrossRef

Yu Z, Tan H, Wang S, Cheng J, Sun Q, Yang J, Liu W (2020) High-temperature tribological behaviors of MoAlB ceramics sliding against Al₂O₃ and Inconel 718 alloy. Ceram Int. https://doi.org/10.1016/j.ceramint.2020.02.275CrossRef

Yue XY, Zhao SM, Lu P, Chang Q, Ru HQ (2010) Synthesis and properties of hot pressed B₄C-TiB₂ ceramic composite. Mater Sci Eng A 527:7215–7219CrossRef

Zamora V, Ortiz AL, Guiberteau F, Nygren M (2012) Crystal-size dependence of the spark-plasma-sintering kinetics of ZrB₂ ultra-high-temperature ceramics. J Eur Ceram Soc 32:271–276CrossRef

Zhang YS, Hu LT, Chen JM, Liu WM (2010) Lubrication behavior of Y-TZP/Al₂O₃/Mo nanocomposites at high temperature. Wear 268:1091–1094CrossRef

Zhang J, Zhang J, Xiao G, Chen Z, Yi M, Zhang Y, Xu C (2020) Orentational effect of graphene on the friction and wear behavior of Si₃N₄/TiC based composite ceramic tool materials. Ceram Int 46(3):3550–3557CrossRef

Zhao H, Cheng YB (1999) Formation of TiB₂-TiC composites by reactive sinterin. J Ceram Silik 37(1):353

Zhaoa B, Khader I, Raga R, Konrath G, Degenhardt U, Kailer A (2019) High temperature tribological properties of silicon nitride in dry sliding contact against Inconel 718 heated by laser. Wear 434–435:203000CrossRef

Zhu S, Cheng J, Qiao Z, Yang J (2019) High temperature solid-lubricating materials: a review. Tribol Int 133:206–223CrossRef

Titel: Tribomechanical Behaviour of Non-oxide Ceramic Matrix Composites in Dry Sliding
verfasst von: Subhrojyoti Mazumder
Hendrik Simon Cornelis Metselaar
Nazatul Liana Sukiman
Nurin Wahidah Mohd Zulkifli
Verlag: Springer Singapore
Buch: Tribological Applications of Composite Materials
Print ISBN: 978-981-15-9634-6

Electronic ISBN: 978-981-15-9635-3

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-981-15-9635-3_1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht