nach oben

Russian Journal of Nondestructive Testing

Erschienen in:

01.07.2021 | ACOUSTIC METHODS

Ultrasonic Measurement Optimization of Spot Welding Diameter of Thin Plate Based on Gain Compensation Algorithm

verfasst von: Gang Wu, Dongdong Zhang, Shanyue Guan

Erschienen in: Russian Journal of Nondestructive Testing | Ausgabe 7/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Aiming at the influence of signal attenuation on nugget diameter evaluation results in ultrasonic testing of resistance spot welding, a gain compensation method based on wavelet transform for different frequency subband signals is proposed in this paper. Each subband signal is compensated and reconstructed respectively, and the nugget diameter is calculated by the reconstructed signal. This method is used to compensate the spot welding test signal and simulation signal respectively. The nugget diameter is calculated by the compensation signal, and the calculated value is compared with the measured value of nugget diameter. The results show that the method can effectively reduce the calculation error of nugget diameter by compensating the gain of ultrasonic testing signal.

Vorheriger Artikel Theoretical and Experimental Studies of the Bone Damage Detection by the Ultrasonic Method

Nächster Artikel On Calculating the Field of a Finite Magnetic Cylinder with an Internal Coaxial Cylindrical Defect

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Liu, J., Xu, G.C., Gu, X.P., and Zhou, G.H., Ultrasonic test of resistance spot welds based on wavelet package, Ultrasonics, 2015, vol. 56, pp. 557–565. https://doi.org/10.1016/j.ultras.2014.10.013CrossRef

S.D., Pye, S.R., Wild, and W.N., McDicken, Adaptive time gain compensation for ultrasonic imaging, Ultrasound Med. Biol., 1992, vol. 18, no.2, pp. 205–212. https://doi.org/10.1016/0301 5629(92)90131s

Wang, T., Wang, C., Xu, G., et al, Ultrasonic scanning inspection research on resistance spot welding, Insight, 2014, vol. 56, pp. 617–621. https://doi.org/10.1784/insi.2014.56.11.617CrossRef

Cruz, F.C., Simas Filho, E.F., Albuquerque, M.C., et al., Efficient feature selection for neural network based detection of flaws in steel welded joints using ultrasound testing, Ultrasonics, 2016, vol. 73, pp. 1–8. https://doi.org/10.1016/j.ultras.2016.08.017CrossRef

Amiri, N., Farrahi, G.H., Kashyzadeh K. Reza, and Chizari., M., Applications of ultrasonic testing and machine learning methods to predict the static and fatigue behavior of spot welded joints, J. Manuf. Process., 2020, vol. 52, pp. 26–34. https://doi.org/10.1016/j.jmapro.2020.01.047CrossRef

Zhenli Liu, Kailiang Xu, Dan Li, DeanTa, and Weiqi Wang, Automatic mode extraction of ultrasonic guided waves using synchrosqueezed wavelet, Ultrasonics, 2019, vol. 99, article ID: 105948. https://doi.org/10.1016/j.ultras.2019.105948CrossRef

Delrue, S., Abeele, K.V.D., Blomme, E., Matar, O.B., et al., Two dimensional simulation of the single sided air coupled ultrasonic pitch catch technique for nondestructive testing, Ultrasonics, 2010, vol. 50, no. 2, pp. 188–196. https://doi.org/10.1016/j.ultras.2009.08.005CrossRef

Mozurkewich, G., Ghaffari, B., and Potter, T.J., Spatially resolved ultrasonic attenuation in resistance spot welds: Implications for nondestructive testing, Ultrasonics, 2008, vol. 48, no. 5, pp. 343–350. https://doi.org/10.1016/j.ultras.2008.01.004CrossRef

Pedram, S.K., Fateri, S., Gan, L., Haig, A., Thornicroft, K., Split spectrum processing technique for SNR enhancement of ultrasonic guided wave, Ultrasonics, 2018, vol. 83, pp. 48–59. https://doi.org/10.1016/j.ultras.2017.08.002CrossRef

10.

Sun Xinyu, Zeng Kai, He Xiaocong, and Zhang Long, Ultrasonic C scan imaging and analysis of the mechanical properties of resistance spot welded joints of stainless steel, Nondestr. Test. Eval., 2017, vol. 32, no. 3, pp. 242–254. https://doi.org/10.1080/10589759.2016.1241251CrossRef

11.

Melih C. Yesilli, Firas A. Khasawneh, and Andreas Otto, On transfer learning for chatter detection in turning using wavelet packet transform and ensemble empirical mode decomposition, CIRP J. Manuf. Sci. Technol., 2020, vol. 28, pp. 118–135. https://doi.org/10.1016/j.cirpj.2019.11.003CrossRef

12.

Vejdannik, M. and Sadr, A., Automatic microstructural characterization and classification using dual tree complex wavelet–based features and Bees Algorithm, Neural Comput. Appl., 2016, vol. 28, pp. 1–13. https://doi.org/10.1007/s00521-016-2188-9CrossRef

13.

Moilanen, P., Salmi, A., Kilappa, V., Zhao, Z., Timonen, J., and Hæggström, E., Phased laser diode array permits selective excitation of ultrasonic guided waves in coated bonemimicking tubes, J. Appl. Phys., 2017, vol. 122, no. 14, article ID 144901. https://doi.org/10.1063/1.5007224CrossRef

14.

Song, X., Ta, D., and Wang, W., Analysis of superimposed ultrasonic guided waves in long bones by the joint approximate diagonalization of eigen–matrices algorithm, Ultrasound Med. Biol., 2011, vol. 37, no. 10, pp. 1704–1713. https://doi.org/10.1016/j.ultrasmedbio.2011.06.028CrossRef

15.

Bai, L., Xu, K., Bochud, N., Ta, D., Hu, B., Laugier, P., and Minonzio, J., Multichannel wideband mode–selective excitation of ultrasonic guided waves in long cortical bone, 2016 IEEE Int. Ultrasonics Symp., Tours, 2016, pp. 1–4. https://doi.org/10.1109/ULTSYM.2016.7728774

16.

Harley, J.B., Moura, J.M., Sparse recovery of the multimodal and dispersive characteristics of Lamb waves, J. Acoust. Soc Am., 2013, vol. 133, no. 5, pp. 2732–2745. https://doi.org/10.1121/1.4799805CrossRef

17.

Gao, F., Zeng, L., Lin, J., and Luo, Z., Mode separation in frequency–wavenumber domain through compressed sensing of far–field Lamb waves, Meas. Sci. Technol., 2017, vol. 28, no. 7, article ID 075004. https://doi.org/10.1088/1361-6501/aa6c54CrossRef

18.

Thakur, G., Brevdo, E., Fučkar, N.S., and Wu, H., The synchrosqueezing algorithm for timevarying spectral analysis: robustness properties and new paleoclimate applications, Sign. Process., 2013, vol. 93, no. 5, pp. 1079–1094. https://doi.org/10.1016/j.sigpro.2012.11.029CrossRef

19.

Clausel, M., Oberlin, T., and Perrier, V., The monogenic synchrosqueezed wavelet transform: a tool for the decomposition/demodulation of AM–FM images, Appl. Comput. Harmonic Anal., 2015, vol. 39, no. 3, pp. 450–486. https://doi.org/10.1016/j.acha.2014.10.003CrossRef

20.

Jiang, Q., and Suter, B.W., Instantaneous frequency estimation based on synchrosqueezing wavelet transform, Sign. Process., 2017, vol. 138, pp. 167–181. https://doi.org/10.1016/j.sigpro.2017.03.007CrossRef

21.

Papandreou-Suppappola, A., Murray, R.L., Lem, B., and Boudreaux-Bartels, G.F., Group delay shift covariant quadratic time–frequency representations, IEEE Trans. Sign. Process., 2001, vol. 49, no. 11, pp. 2549–2564. https://doi.org/10.1109/78.960403CrossRef

22.

Cruz, F.C., Simas Filho, E.F., Albuquerque, M.C., et al., Efficient feature selection for neural network based detection of flaws in steel welded joints using ultrasound testing, Ultrasonics, 2017, vol. 73, pp. 1–8. https://doi.org/10.1016/j.ultras.2016.08.017CrossRef

23.

Liu, J., Xu, G., Gu, X., et al., Ultrasonic test of resistance spot welds based on wavelet package analysis, Ultrasonics, 2015, vol. 56, pp. 557–565. https://doi.org/10.1016/j.ultras.2014.10.013CrossRef

24.

Palanisamy, S., Nagarajah, C.R., Graves, K., et al., A hybrid signal pre-processing approach in processing ultrasonic signals with noise, Int. J. Adv. Manuf. Technol., 2009, vol. 42, no. 7—8, pp. 766–771. https://doi.org/10.1007/s00170-008-1640-0CrossRef

25.

Liu, X., Xiao, D., Shan, Y., et al., Solder joint failure localization of welded joint based on acoustic emission beamforming, Ultrasonics, 2017, vol. 74, pp. 221–232. https://doi.org/10.1016/j.ultras.2016.11.002CrossRef

26.

Daamouche, A., Hamami, L., Alajlan, N., et al., A wavelet optimization approach for ECG signal classification, Biomed. Sign. Proc. Cont., 2012, vol. 7, no. 4, pp. 342–349. https://doi.org/10.1016/j.bspc.2011.07.001CrossRef

27.

Yang, P. and Li, Q., Wavelet transform based feature extraction for ultrasonic flaw signal classification, Neural Comput. Appl., 2014, vol. 24, no. 3–4, pp. 817–826. https://doi.org/10.4304/jcp.9.3.725-732

Titel: Ultrasonic Measurement Optimization of Spot Welding Diameter of Thin Plate Based on Gain Compensation Algorithm
verfasst von: Gang Wu
Dongdong Zhang
Shanyue Guan
Publikationsdatum: 01.07.2021
Verlag: Pleiades Publishing
Erschienen in: Russian Journal of Nondestructive Testing / Ausgabe 7/2021
Print ISSN: 1061-8309
Elektronische ISSN: 1608-3385
DOI: https://doi.org/10.1134/S1061830921070135

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2021

On the Use of Structural Noise Parameters in Testing 20GL Steel with Rayleigh Surface Waves under Elastoplastic Deformation

Method and Equipment for Infrared and Ultrasonic Thermographic Testing of Large-Sized Complex-Shaped Composite Products

Mathematical Description and Analysis of Vibration-Induction Transducer Signal Due to Normal Component of Magnetic Scattering Fluxes over a Defective Section

Theoretical and Experimental Studies of the Bone Damage Detection by the Ultrasonic Method

Fast Method to Reconstruct and Enhance CT Images: Applied to Metal Artifact Reduction

Chirp Z Transform Based Barker Coded Thermal Wave Imaging for the Characterization of Fiber Reinforced Polymers

Premium Partner

Marktübersichten