nach oben

Journal of Intelligent Manufacturing

Erschienen in:

09.10.2014

Variation source identification for deep hole boring process of cutting-hard workpiece based on multi-source information fusion using evidence theory

verfasst von: Xueliang Zhou, Pingyu Jiang

Erschienen in: Journal of Intelligent Manufacturing | Ausgabe 2/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Variation source identification for machining process is a key issue in closed-loop quality control, and critical for quality and productivity improvement. Meanwhile, it is a challenging engineering problem, especially for deep hole boring process of cutting-hard workpiece due to its complexity and instability. In this paper, a systematic method of variation source identification for deep hole boring process based on multi-source information fusion using Dempster–Shafter (D–S) evidence theory is proposed. A logic framework for variation source identification is presented to address how this issue can be formulated in the frame of evidence theory, in terms of evidence acquisition, variation source frame of discernment, mass functions and the rules for evidence combination and decision-making. First, run charts are applied to detect the non-random variation of quality measurements of one workpiece, which are acquired at equidistant positions along the axis direction of the hole. And the unnatural run chart patterns are detected by using fuzzy support vector machine and regarded as information cues for variation source identification. Then, the frame of discernment which consists of potential variation source in case of every specific unnatural pattern is constructed. The mass functions that represent the degree of belief supported by the unnatural patterns regarding the possible causes are determined by using judgment matrixes, and treated as pieces of evidences of variation source identification. Afterwards, all of the evidences are combined by using D–S fusion rules. The rules for making reliable diagnostic decisions are also addressed. Finally, a case study is put forward to demonstrate the feasibility and effectiveness of the proposed methodology. The results indicate that the proposed method can resolve the conflicts among the evidences and improve the accuracy of variation source identification for deep hole boring process.

Nächster Artikel Intelligent assembly system for mechanical products and key technology based on internet of things

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Alaeddini, A., & Dogan, I. (2011). Using Bayesian networks for root cause analysis in statistical process control. Expert Systems with Applications, 38(9), 11230–11243. doi:10.1016/j.eswa.2011.02.171.CrossRef

An, W., & Liang, M. (2013). Fuzzy support vector machine based on within-class scatter for classification problems with outliers or noises. Neurocomputing, 110, 101–110. doi:10.1016/j.neucom.2012.11.023.CrossRef

Apley, D. W., & Shi, J. (2001). A factor-analysis method for diagnosing variability in mulitvariate manufacturing processes. Technometrics, 43(1), 84–95. doi:10.1198/00401700152404354.CrossRef

Basir, O., & Yuan, X. (2007). Engine fault diagnosis based on multi-sensor information fusion using Dempster–Shafer evidence theory. Information Fusion, 8(4), 379–386. doi:10.1016/j.inffus.2005.07.003.CrossRef

Demirli, K., & Vijayakumar, S. (2008). Fuzzy assignable cause diagnosis of control chart patterns. In 2008 Annual meeting of the North American of Fuzzy Information Processing Society (NAFIPS 2008) (pp. 1–6), Piscataway: IEEE. doi:10.1109/NAFIPS.2008.4531260.

Deng, C.-S., & Chin, J.-H. (2005). Hole roundness in deep-hole drilling as analysed by Taguchi methods. The International Journal of Advanced Manufacturing Technology, 25(5–6), 420–426. doi:10.1007/s00170-003-1825-5.CrossRef

Dey, S., & Stori, J. A. (2005). A Bayesian network approach to root cause diagnosis of process variations. International Journal of Machine Tools and Manufacture, 45(1), 75–91. doi:10.1016/j.ijmachtools.2004.06.018.CrossRef

Ding, Y., Ceglarek, D., & Shi, J. J. (2002a). Fault diagnosis of multistage manufacturing processes by using state space approach. Transactions of the ASME Journal of Manufacturing Science and Engineering, 124(2), 313–322. doi:10.1115/1.1445155.CrossRef

Ding, Y., Shi, J. J., & Ceglarek, D. (2002b). Diagnosability analysis of multi-station manufacturing processes. Transactions of the ASME Journal of Dynamic Systems Measurement and Control, 124(1), 1–13. doi:10.1115/1.1435645.CrossRef

Du, S., Huang, D., & Lv, J. (2013). Recognition of concurrent control chart patterns using wavelet transform decomposition and multiclass support vector machines. Computers & Industrial Engineering, 66(4), 683–695. doi:10.1016/j.cie.2013.09.012.CrossRef

Du, S., & Lv, J. (2013). Minimal Euclidean distance chart based on support vector regression for monitoring mean shifts of auto-correlated processes. International Journal of Production Economics, 141(1), 377–387. doi:10.1016/j.ijpe.2012.09.002.CrossRef

Du, S., Lv, J., & Xi, L. (2010a). An integrated system for on-line intelligent monitoring and identifying process variability and its application. International Journal of Computer Integrated Manufacturing, 23(6), 529–542. doi:10.1080/09511921003667730.CrossRef

Du, S., Lv, J., & Xi, L. (2012a). On-line classifying process mean shifts in multivariate control charts based on multiclass support vector machines. International Journal of Production Research, 50(22), 6288–6310. doi:10.1080/00207543.2011.631596.CrossRef

Du, S., Lv, J., & Xi, L. (2012b). A robust approach for root causes identification in machining processes using hybrid learning algorithm and engineering knowledge. Journal of Intelligent Manufacturing, 23(5), 1833–1847. doi:10.1007/s10845-010-0498-9.CrossRef

Du, S., & Xi, L. (2011). Fault diagnosis in assembly processes based on engineering-driven rules and PSOSAEN algorithm. Computers and Industrial Engineering, 60(1), 77–88. doi:10.1016/j.cie.2010.10.001.CrossRef

Du, S., Yu, L. X. J., & Sun, J. (2010b). Online intelligent monitoring and diagnosis of aircraft horizontal stabilizer assemble processes. The International Journal of Advanced Manufacturing Technology, 50(1–4), 377–389. doi:10.1007/s00170-009-2490-0.CrossRef

Guan, J. W., & Bell, D. A. (1992). Evidence theory and its applications (Vol. 2). Amsterdam: North Holland.

Hassan, A., Shariff Nabi Baksh, M., Shaharoun, A. M., & Jamaluddin, H. (2003). Improved SPC chart pattern recognition using statistical features. International Journal of Production Research, 41(7), 1587–1603. doi:10.1080/0020754021000049844.CrossRef

Hayajneh, M. T. (2001). Hole quality in deep hole drilling. Materials and Manufacturing Processes, 16(2), 147–164. doi:10.1081/AMP-100104297.CrossRef

He, S.-G., He, Z., & Wang, G. (2013). Online monitoring and fault identification of mean shifts in bivariate processes using decision tree learning techniques. Journal of Intelligent Manufacturing, 24(1), 25–34. doi:10.1007/s10845-011-0533-5.CrossRef

Hou, T.-H., Liu, W.-L., & Lin, L. (2003). Intelligent remote monitoring and diagnosis of manufacturing processes using an integrated approach of neural networks and rough sets. Journal of Intelligent Manufacturing, 14(2), 239–253. doi:10.1023/A:1022911715996.CrossRef

Huang, Q., Zhou, S., & Shi, J. (2002). Diagnosis of multi-operational machining processes through variation propagation analysis. Robotics and Computer-Integrated Manufacturing, 18(3–4), 233–239. doi:10.1016/S0736-5845(02)00014-5.CrossRef

Huang, Y., McMurran, R., Dhadyalla, G., & Peter Jones, R. (2008). Probability based vehicle fault diagnosis: Bayesian network method. Journal of Intelligent Manufacturing, 19(3), 301–311. doi:10.1007/s10845-008-0083-7.CrossRef

Jakovljevic, Z., Petrovic, P. B., Mikovic, V. D., & Pajic, M. (2014). Fuzzy inference mechanism for recognition of contact states in intelligent robotic assembly. Journal of Intelligent Manufacturing, 25(3), 571–587. doi:10.1007/s10845-012-0706-x.CrossRef

Jiang, P., Jia, F., Wang, Y., & Zheng, M. (2014). Real-time quality monitoring and predicting model based on error propagation networks for multistage machining processes. Journal of Intelligent Manufacturing, 25(3), 521–538. doi:10.1007/s10845-012-0703-0.CrossRef

Jin, N., & Zhou, S. (2006a). Data-driven variation source identification for manufacturing process using the eigenspace comparison method. Naval Research Logistics (NRL), 53(5), 383–396. doi:10.1002/nav.20150.

Jin, N. N., & Zhou, S. Y. (2006b). Signature construction and matching for fault diagnosis in manufacturing processes through fault space analysis. IIE Transactions, 38(4), 341–354. doi:10.1080/07408170500216498.

Kaftandjian, V., Dupuis, O., Babot, D., & Min Zhu, Y. (2003). Uncertainty modelling using Dempster–Shafer theory for improving detection of weld defects. Pattern Recognition Letters, 24(1–3), 547–564. doi:10.1016/S0167-8655(02)00276-3.CrossRef

Kyung, J. M., Gibaek, L., Dong, S. N., Yeo, H. Y., & En, S. Y. (1997). Robust fault diagnosis based on clustered symptom trees. Control Engineering Practice, 5(2), 199–208. doi:10.1016/S0967-0661(97)00226-8.CrossRef

Lewis, R. W., & Ransing, R. S. (1997). A semantically constrained Bayesian network for manufacturing diagnosis. International Journal of Production Research, 35(8), 2171–2188. doi:10.1080/002075497194796.CrossRef

Li, D.-C., Chang, C.-C., Liu, C.-W., & Chen, W.-C. (2013a). A new approach for manufacturing forecast problems with insufficient data: the case of TFT-LCDs. Journal of Intelligent Manufacturing, 24(2), 225–233. doi:10.1007/s10845-011-0577-6.

Li, M., Wang, L., & Wu, M. (2013b). A multi-objective genetic algorithm approach for solving feature addition problem in feature fatigue analysis. Journal of Intelligent Manufacturing, 24(6), 1197–1211. doi:10.1007/s10845-012-0652-7.

Li, Z., & Zhou, S. (2006). Robust method of multiple variation sources identification in manufacturing processes for quality improvement. Transactions of the ASME Journal of Manufacturing Science And Engineering, 128(1), 326. doi:10.1115/1.2117447.CrossRef

Li, Z., Zhou, S., & Ding, Y. (2007). Pattern matching for root cause identification of manufacturing processes with consideration of general structured noise. IIE Transactions, 39(3), 251–263.CrossRef

Lim, C., Nam, S. W., & Chang, J.-H. (2013). Fast SVM-based epileptic seizure prediction employing data prefetching. Electronics Letters, 49(1), 13–15. doi:10.1049/el.2012.3414.CrossRef

Lin, C.-F., & Wang, S.-D. (2002). Fuzzy support vector machines. IEEE Transactions on Neural Networks, 13(2), 464–471.CrossRef

Loose, J. P., Shiyu, Z., & Ceglarek, D. (2007). Kinematic analysis of dimensional variation propagation for multistage machining processes with general fixture layouts. IEEE Transactions on Automation Science and Engineering, 4(2), 141–152. doi:10.1109/TASE.2006.877393.CrossRef

Loose, J. P., Zhou, S. Y., & Ceglarek, D. (2008). Variation source identification in manufacturing processes based on relational measurements of key product characteristics. Transactions of the ASME Journal of Manufacturing Science and Engineering, 130(3), 0310071–03100711. doi:10.1115/1.2844591.CrossRef

Lu, C.-J. (2012). An independent component analysis-based disturbance separation scheme for statistical process monitoring. Journal of Intelligent Manufacturing, 23(3), 561–573. doi:10.1007/s10845-010-0394-3.CrossRef

Montgomery, D. C. (2007). Introduction to statistical quality control. New York: Wiley.

Parikh, C. R., Pont, M. J., & Barrie Jones, N. (2001). Application of Dempster–Shafer theory in condition monitoring applications: A case study. Pattern Recognition Letters, 22(6–7), 777–785. doi:10.1016/S0167-8655(01)00014-9.CrossRef

Pham, D. T., & Wani, M. A. (1997). Feature-based control chart pattern recognition. International Journal of Production Research, 35(7), 1875–1890. doi:10.1080/002075497194967.CrossRef

Ranaee, V., Ebrahimzadeh, A., & Ghaderi, R. (2010). Application of the PSO-SVM model for recognition of control chart patterns. ISA Transactions, 49(4), 577–586. doi:10.1016/j.isatra.2010.06.005.CrossRef

Rokach, L., & Hutter, D. (2012). Automatic discovery of the root causes for quality drift in high dimensionality manufacturing processes. Journal of Intelligent Manufacturing, 23(5), 1915–1930. doi:10.1007/s10845-011-0517-5.CrossRef

Rooney, J. J., & Heuvel, L. N. V. (2004). Root cause analysis for beginners. Quality Progress, 37(7), 45–56.

Saaty, T. (1990). How to make a decision. The analytic hierarchy process. European Journal of Operational Research, 48(1), 9–26. doi:10.1016/0377-2217(90)90057-I.

Shannon, C. E. (2001). A mathematical theory of communication. ACM SIGMOBILE Mobile Computing and Communications Review, 5(1), 3–55.

Tsai, T.-N. (2014). A hybrid intelligent approach for optimizing the fine-pitch copper wire bonding process with multiple quality characteristics in IC assembly. Journal of Intelligent Manufacturing, 25(1), 177–192. doi:10.1007/s10845-012-0685-y.CrossRef

Wang, C.-H., & Tsai, S.-W. (2014). Optimizing bi-objective imperfect preventive maintenance model for series-parallel system using established hybrid genetic algorithm. Journal of Intelligent Manufacturing, 25(3), 603–616. doi:10.1007/s10845-012-0708-8.CrossRef

Whitley, D. (1994). A genetic algorithm tutorial. Statistics and Computing, 4(2), 65–85. doi:10.1007/BF00175354.CrossRef

Widodo, A., & Yang, B.-S. (2007). Support vector machine in machine condition monitoring and fault diagnosis. Mechanical Systems and Signal Processing, 21(6), 2560–2574. doi:10.1016/j.ymssp.2006.12.007.CrossRef

Wu, Z., Zhang, H., & Liu, J. (2014). A fuzzy support vector machine algorithm for classification based on a novel PIM fuzzy clustering method. Neurocomputing, 125, 119–124. doi:10.1016/j.neucom.2012.07.049.CrossRef

Yager, R., & Liu, L. (2008). Classic works of the Dempster–Shafer theory of belief functions. Berlin: Springer.CrossRef

Yang, H.-Y., Wang, X.-Y., Zhang, X.-Y., & Bu, J. (2012). Color texture segmentation based on image pixel classification. Engineering Applications of Artificial Intelligence, 25(8), 1656–1669. doi:10.1016/j.engappai.2012.09.010.

Zeng, L., Jin, N., & Zhou, S. (2008). Multiple fault signature integration and enhancing for variation source identification in manufacturing processes. IIE Transactions, 40(10), 919–930. doi:10.1080/07408170801961404.CrossRef

Zhang, M., Djurdjanovic, D., & Ni, J. (2007). Diagnosibility and sensitivity analysis for multi-station machining processes. International Journal of Machine Tools and Manufacture, 47(3–4), 646–657. doi:10.1016/j.ijmachtools.2006.04.011.CrossRef

Zhou, S., Chen, Y., & Shi, J. (2004). Statistical estimation and testing for variation root-cause identification of multistage manufacturing processes. IEEE Transactions on Automation Science and Engineering, 1(1), 73–83. doi:10.1109/TASE.2004.829427.CrossRef

Zhou, S., Ding, Y., Chen, Y., & Shi, J. (2003a). Diagnosability study of multistage manufacturing processes based on linear mixed-effects models. Technometrics, 45(4), 312–325. doi:10.1198/004017003000000131.

Zhou, S. Y., Huang, Q., & Shi, J. J. (2003b). State space modeling of dimensional variation propagation in multistage machining process using differential motion vectors. IEEE Transactions on Robotics and Automation, 19(2), 296–309. doi:10.1109/TRA.2003.808852.

Titel: Variation source identification for deep hole boring process of cutting-hard workpiece based on multi-source information fusion using evidence theory
verfasst von: Xueliang Zhou
Pingyu Jiang
Publikationsdatum: 09.10.2014
Verlag: Springer US
Erschienen in: Journal of Intelligent Manufacturing / Ausgabe 2/2017
Print ISSN: 0956-5515
Elektronische ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-014-0975-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2017

New dynamic heuristic for the optimization of opportunities to use new and remanufactured spare part in stochastic degradation context

Simultaneous order scheduling and mixed-model sequencing in assemble-to-order production environment: a multi-objective hybrid artificial bee colony algorithm

Solving dynamic systems with multi-responses by integrating desirability function and data envelopment analysis

Modified genetic algorithm for simple straight and U-shaped assembly line balancing with fuzzy processing times

An inverse model for injection molding of optical lens using artificial neural network coupled with genetic algorithm

Intelligent assembly system for mechanical products and key technology based on internet of things

Premium Partner

Marktübersichten